| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An issue in Lymphatus caesium-image-compressor All versions up to and including commit 02da2c6 allows a local attacker to execute arbitrary code via the shutdownMachine and putMachineToSleep functions in PostCompressionActions.cpp |
| Missing input validation in the MP_REACH_NLRI component of FRRouting (FRR) stable/10.0 to stable/10.6 allows authenticated attackers to cause a Denial of Service (DoS) via supplying a crafted UPDATE message. |
| An out-of-bounds read in the ParseIP6Extended function (/bgp/bgp.go) of gobgp v4.3.0 allows attackers to cause a Denial of Service (DoS) via supplying a crafted BGP UPDATE message. |
| OOM Denial of Service via Unbounded Array Allocation in Apache OpenNLP AbstractModelReader
Versions Affected:
before 2.5.9
before 3.0.0-M3
Description:
The AbstractModelReader methods getOutcomes(), getOutcomePatterns(), and getPredicates() each read a 32-bit signed integer count field from a binary model stream and pass that value directly to an array allocation (new String[numOutcomes], new int[numOCTypes][], new String[NUM_PREDS]) without validating that the value is non-negative or within a reasonable bound. The count is therefore fully attacker-controlled when the model file originates from an untrusted source.
A crafted .bin model file in which any of these count fields is set to Integer.MAX_VALUE (or any value large enough to exhaust the available heap) triggers an OutOfMemoryError at the array allocation itself, before the corresponding label or pattern data is consumed from the stream. The error occurs very early in deserialization: for a GIS model, getOutcomes() is reached after only the model-type string, the correction constant, and the correction parameter have been read; so the attacker pays no meaningful size cost to weaponize a payload, and a single small file can crash a JVM that loads it. Any code path that deserializes a .bin model is affected, including direct use of GenericModelReader and any higher-level component that delegates to it during model load.
The practical impact is denial of service against processes that load model files from untrusted or semi-trusted origins.
Mitigation:
* 2.x users should upgrade to 2.5.9.
* 3.x users should upgrade to 3.0.0-M3.
Note: The fix introduces an upper bound on each of the three count fields, checked before array allocation; counts that are negative or exceed the bound cause an IllegalArgumentException to be thrown and the read to fail fast with no large allocation. The default bound is 10,000,000, which is well above the entry counts of legitimate OpenNLP models but far below any value that would threaten heap exhaustion. Deployments that legitimately need to load models with more entries than the default can raise the limit at JVM startup by setting the OPENNLP_MAX_ENTRIES system property to the desired positive integer (e.g. -DOPENNLP_MAX_ENTRIES=50000000); invalid or non-positive values fall back to the default.
Users who cannot upgrade immediately should treat all .bin model files as untrusted input unless their provenance is verified, and should avoid loading models supplied by end users or fetched from third-party repositories without integrity checks. |
| Arbitrary Class Instantiation via Model Manifest in Apache OpenNLP ExtensionLoader
Versions Affected: before 2.5.9, before 3.0.0-M3
Description:
The ExtensionLoader.instantiateExtension(Class, String) method loads a class by its fully-qualified name via Class.forName() and invokes its no-arg constructor, with the class name sourced from the manifest.properties entry of a model archive. The existing isAssignableFrom check correctly rejects classes that are not subtypes of the expected extension interface (BaseToolFactory for factory=, ArtifactSerializer for serializer-class-*), but the check runs after Class.forName() has already loaded and initialized the named class.
Class.forName() with default initialization semantics executes the target class's static initializer before returning, so an attacker who can supply a crafted model archive can cause the static initializer of any class on the classpath to run during model loading, regardless of whether that class passes the subsequent type check.
Exploitation requires a class with attacker-useful side effects in its static initializer (for example, JNDI lookup, outbound network I/O, or filesystem access) to be present on the classpath, so this is not a drop-in remote code execution; however, the attack surface grows as third-party model distribution becomes more common (community model repositories, Hugging Face-style sharing), where users routinely load model files from origins they do not control. A secondary, narrower vector affects deployments that ship legitimate BaseToolFactory or ArtifactSerializer subclasses with side-effecting no-arg constructors: a malicious manifest can name such a class and force its constructor to run during model load.
Mitigation:
* 2.x users should upgrade to 2.5.9.
* 3.x users should upgrade to 3.0.0-M3.
Note: The fix introduces a package-prefix allowlist that is consulted before Class.forName() is invoked, so the static initializer of a disallowed class is never executed. Classes under the opennlp. prefix remain permitted by default. Deployments that load models referencing factories or serializers outside opennlp.* must opt those packages in, either programmatically via ExtensionLoader.registerAllowedPackage(String) before the first model load, or by setting the OPENNLP_EXT_ALLOWED_PACKAGES system property to a comma-separated list of allowed package prefixes.
Users who cannot upgrade immediately should ensure that all model files are sourced from trusted origins and should audit their classpath for classes with side-effecting static initializers or constructors, particularly any that perform JNDI lookups, network requests, or filesystem operations during class initialization. |
| OpenSTAManager version 2.10 and earlier contains an arbitrary file upload vulnerability in the module update functionality (modules/aggiornamenti/upload_modules.php) |
| The rtl8192cd Wi-Fi kernel driver in the Realtek rtl819x Jungle SDK (all known versions through v3.4.14B) does not perform any access control checks on the write_mem (ioctl 0x89F5) and read_mem (ioctl 0x89F6) debug handlers, which are compiled into production builds via the unconditionally defined _IOCTL_DEBUG_CMD_ macro in 8192cd_cfg.h |
| An issue was discovered in Gambio 4.9.2.0 (patched in 2024-02 v1.0.0 for GX4 v4.0.0.0 to v4.9.2.0). The password reset function can be bypassed to set arbitrary passwords for arbitrary accounts if the ID is known. |
| A command injection vulnerability in D-Link DIR-823X 240126 and 240802 allows an authorized attacker to execute arbitrary commands on remote devices by sending a POST request to /goform/set_prohibiting via the corresponding function, triggering remote command execution. |
| eLabFTW is an open source electronic lab notebook. In elabftw versions through 5.4.1, the login flow did not reliably preserve the multi-factor authentication state across authentication steps. Under certain conditions, an attacker with valid primary credentials could complete authentication with an attacker-controlled TOTP secret and bypass the additional factor. This could result in unauthorized account access. This issue is fixed in version 5.4.2. |
| A flaw has been found in chatchat-space Langchain-Chatchat up to 0.3.1.3. This issue affects the function PIL.Image.tobytes of the file libs/chatchat-server/chatchat/webui_pages/dialogue/dialogue.py of the component Vision Chat Paste Image Handler. This manipulation of the argument paste_image.image_data causes use of weak hash. The attacker needs to be present on the local network. The attack is considered to have high complexity. The exploitability is assessed as difficult. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| ISPConfig 3.3.0 is vulnerable to Cross Site Scripting (XSS) via the system status webpage. |
| IEEE 802.11 protocol dissector crash in Wireshark 4.6.0 to 4.6.4 |
| The Zingaya Click-to-Call plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'email', 'first_name', 'last_name', and 'phone' parameters on the plugin's sign-up admin page in all versions up to, and including, 1.0. This is due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| Allocation of Resources Without Limits or Throttling vulnerability in phoenixframework phoenix allows a denial of service via the long-poll transport's NDJSON body handling.
In 'Elixir.Phoenix.Transports.LongPoll':publish/4, when a POST request is received with Content-Type: application/x-ndjson, the request body is split on newline characters using String.split/2 with no limit on the number of resulting segments. An attacker can send a body consisting entirely of newline bytes, causing a 1:1 amplification into a list of empty binaries — a 1 MB body produces approximately one million list elements, an 8 MB body approximately 8.4 million. Each element is then walked by Enum.map, materializing another list of the same size. This exhausts BEAM memory and schedulers, crashing the node and terminating all active sessions.
A session token required to reach the vulnerable endpoint is freely obtainable by any client via an unauthenticated GET request to the same URL with a matching Origin header, making this attack effectively unauthenticated.
This issue affects phoenix: from 1.7.0 before 1.7.22 and 1.8.6. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: media: dvb-frontends/rtl2832: fix an out-of-bounds write error
Ensure index in rtl2832_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue.
[hverkuil: added fixes tag, rtl2830_pid_filter -> rtl2832_pid_filter in logmsg] |
| The Subscribe To Comments Reloaded plugin for WordPress is vulnerable to unauthorized modification of data due to a leaked secret key and usage of a weak hash generation algorithm in all versions up to, and including, 240119. This makes it possible for unauthenticated attackers to extract the global key from any public post page, forge authorization keys and manage comment subscription preferences for arbitrary users |
| In the Linux kernel, the following vulnerability has been resolved:
drivers: media: dvb-frontends/rtl2830: fix an out-of-bounds write error
Ensure index in rtl2830_pid_filter does not exceed 31 to prevent
out-of-bounds access.
dev->filters is a 32-bit value, so set_bit and clear_bit functions should
only operate on indices from 0 to 31. If index is 32, it will attempt to
access a non-existent 33rd bit, leading to out-of-bounds access.
Change the boundary check from index > 32 to index >= 32 to resolve this
issue. |
| RedwoodSDK is a server-first React framework. From 1.0.0-beta.50 to 1.0.5, erver functions exported from "use server" files could be invoked via GET requests, bypassing their intended HTTP method. In cookie-authenticated applications, this allowed cross-site GET navigations to trigger state-changing functions, because browsers send SameSite=Lax cookies on top-level GET requests. This affected all server functions -- both serverAction() handlers and bare exported functions in "use server" files. This vulnerability is fixed in 1.0.6. |
| The GoAhead web server on MeiG Smart FORGE_SLT711 devices (firmware MDM9607.LE.1.0-00110-STD.PROD-1) allows unauthenticated OS command injection via the /action/SetRemoteAccessCfg endpoint. |
