| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| n8n is an open source workflow automation platform. Prior to version 2.8.0, when the `N8N_SKIP_AUTH_ON_OAUTH_CALLBACK` environment variable is set to `true`, the OAuth callback handler skips ownership verification of the OAuth state parameter. This allows an attacker to trick a victim into completing an OAuth flow against a credential object the attacker controls, causing the victim's OAuth tokens to be stored in the attacker's credential. The attacker can then use those tokens to execute workflows in their name. This issue only affects instances where `N8N_SKIP_AUTH_ON_OAUTH_CALLBACK=true` is explicitly configured (non-default). The issue has been fixed in n8n version 2.8.0. Users should upgrade to this version or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Avoid enabling `N8N_SKIP_AUTH_ON_OAUTH_CALLBACK=true` unless strictly required, and/ or restrict access to the n8n instance to fully trusted users only. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.6.4 and 1.123.23, an authenticated user without permission to list external secrets could reference a secret by the external name in a credential and retrieve its plaintext value when saving the credential. This bypassed the `externalSecret:list` permission check and allowed access to secrets stored in connected vaults without admin or owner privileges. This issue requires the instance to have an external secrets vault configured. The attacker must know or be able to guess the name of a target secret. The issue has been fixed in n8n versions 1.123.23 and 2.6.4. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Restrict n8n access to fully trusted users only, and/or disable external secrets integration until the patch can be applied. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to version 2.5.0, when the Source Control feature is configured to use SSH, the SSH command used for git operations explicitly disabled host key verification. A network attacker positioned between the n8n instance and the remote Git server could intercept the connection and present a fraudulent host key, potentially injecting malicious content into workflows or intercepting repository data. This issue only affects instances where the Source Control feature has been explicitly enabled and configured to use SSH (non-default). The issue has been fixed in n8n version 2.5.0. Users should upgrade to this version or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Disable the Source Control feature if it is not actively required, and/or restrict network access to ensure the n8n instance communicates with the Git server only over trusted, controlled network paths. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.27, 2.13.3, and 2.14.1, an authenticated user with permission to create or modify workflows could craft a workflow that produces an HTML binary data object without a filename. The `/rest/binary-data` endpoint served such responses inline on the n8n origin without `Content-Disposition` or `Content-Security-Policy` headers, allowing the HTML to render in the browser with full same-origin JavaScript access. By sending the resulting URL to a higher-privileged user, an attacker could execute JavaScript in the victim's authenticated session, enabling exfiltration of workflows and credentials, modification of workflows, or privilege escalation to admin. The issue has been fixed in n8n versions 1.123.27, 2.13.3, and 2.14.1. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only, and/or restrict network access to the n8n instance to prevent untrusted users from accessing binary data URLs. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.27, 2.13.3, and 2.14.1, a flaw in the LDAP node's filter escape logic allowed LDAP metacharacters to pass through unescaped when user-controlled input was interpolated into LDAP search filters. In workflows where external user input is passed via expressions into the LDAP node's search parameters, an attacker could manipulate the constructed filter to retrieve unintended LDAP records or bypass authentication checks implemented in the workflow. Exploitation requires a specific workflow configuration. The LDAP node must be used with user-controlled input passed via expressions (e.g., from a form or webhook). The issue has been fixed in n8n versions 1.123.27, 2.13.3, and 2.14.1. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only, disable the LDAP node by adding `n8n-nodes-base.ldap` to the `NODES_EXCLUDE` environment variable, and/or avoid passing unvalidated external user input into LDAP node search parameters via expressions. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Versions starting with 0.211.0 and prior to 1.120.4, 1.121.1, and 1.122.0 contain a critical Remote Code Execution (RCE) vulnerability in their workflow expression evaluation system. Under certain conditions, expressions supplied by authenticated users during workflow configuration may be evaluated in an execution context that is not sufficiently isolated from the underlying runtime. An authenticated attacker could abuse this behavior to execute arbitrary code with the privileges of the n8n process. Successful exploitation may lead to full compromise of the affected instance, including unauthorized access to sensitive data, modification of workflows, and execution of system-level operations. This issue has been fixed in versions 1.120.4, 1.121.1, and 1.122.0. Users are strongly advised to upgrade to a patched version, which introduces additional safeguards to restrict expression evaluation. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only; and/or deploy n8n in a hardened environment with restricted operating system privileges and network access to reduce the impact of potential exploitation. These workarounds do not fully eliminate the risk and should only be used as short-term measures. |
| n8n is an open source workflow automation platform. From version 1.65.0 to before 1.114.3, the use of Buffer.allocUnsafe() and Buffer.allocUnsafeSlow() in the task runner allowed untrusted code to allocate uninitialized memory. Such uninitialized buffers could contain residual data from within the same Node.js process (for example, data from prior requests, tasks, secrets, or tokens), resulting in potential information disclosure. This issue has been patched in version 1.114.3. |
| n8n is an open source workflow automation platform. From 1.36.0 to before 2.2.0, the Webhook node’s IP whitelist validation performed partial string matching instead of exact IP comparison. As a result, an incoming request could be accepted if the source IP address merely contained the configured whitelist entry as a substring. This issue affected instances where workflow editors relied on IP-based access controls to restrict webhook access. Both IPv4 and IPv6 addresses were impacted. An attacker with a non-whitelisted IP could bypass restrictions if their IP shared a partial prefix with a trusted address, undermining the intended security boundary. This vulnerability is fixed in 2.2.0. |
| n8n is an open source workflow automation platform. From version 1.0.0 to before 2.0.0, a sandbox bypass vulnerability exists in the Python Code Node that uses Pyodide. An authenticated user with permission to create or modify workflows can exploit this vulnerability to execute arbitrary commands on the host system running n8n, using the same privileges as the n8n process. This issue has been patched in version 2.0.0. Workarounds for this issue involve disabling the Code Node by setting the environment variable NODES_EXCLUDE: "[\"n8n-nodes-base.code\"]", disabling Python support in the Code node by setting the environment variable N8N_PYTHON_ENABLED=false, which was introduced in n8n version 1.104.0, and configuring n8n to use the task runner based Python sandbox via the N8N_RUNNERS_ENABLED and N8N_NATIVE_PYTHON_RUNNER environment variables. |
| n8n is an open source workflow automation platform. Versions 0.123.1 through 1.119.1 do not have adequate protections to prevent RCE through the project's pre-commit hooks. The Add Config operation allows workflows to set arbitrary Git configuration values, including core.hooksPath, which can point to a malicious Git hook that executes arbitrary commands on the n8n host during subsequent Git operations. Exploitation requires the ability to create or modify an n8n workflow using the Git node. This issue is fixed in version 1.119.2. Workarounds include excluding the Git Node (Docs) and avoiding cloning or interacting with untrusted repositories using the Git Node. |
| n8n is an open source workflow automation platform. Prior to version 1.114.0, a stored Cross-Site Scripting (XSS) vulnerability may occur in n8n when using the “Respond to Webhook” node. When this node responds with HTML content containing executable scripts, the payload may execute directly in the top-level window, rather than within the expected sandbox introduced in version 1.103.0. This behavior can enable a malicious actor with workflow creation permissions to execute arbitrary JavaScript in the context of the n8n editor interface. This issue has been patched in version 1.114.0. Workarounds for this issue involve restricting workflow creation and modification privileges to trusted users only, avoiding use of untrusted HTML responses in the “Respond to Webhook” node, and using an external reverse proxy or HTML sanitizer to filter responses that include executable scripts. |
| n8n is an open source workflow automation platform. Prior to version 2.0.0, in self-hosted n8n instances where the Code node runs in legacy (non-task-runner) JavaScript execution mode, authenticated users with workflow editing access can invoke internal helper functions from within the Code node. This allows a workflow editor to perform actions on the n8n host with the same privileges as the n8n process, including: reading files from the host filesystem (subject to any file-access restrictions configured on the instance and OS/container permissions), and writing files to the host filesystem (subject to the same restrictions). This issue has been patched in version 2.0.0. Workarounds for this issue involve limiting file operations by setting N8N_RESTRICT_FILE_ACCESS_TO to a dedicated directory (e.g., ~/.n8n-files) and ensure it contains no sensitive data, keeping N8N_BLOCK_FILE_ACCESS_TO_N8N_FILES=true (default) to block access to .n8n and user-defined config files, and disabling high-risk nodes (including the Code node) using NODES_EXCLUDE if workflow editors are not fully trusted. |
| n8n is an open source workflow automation platform. Prior to 1.113.0, a remote code execution vulnerability exists in the Git Node component available in both Cloud and Self-Hosted versions of n8n. When a malicious actor clones a remote repository containing a pre-commit hook, the subsequent use of the Commit operation in the Git Node can inadvertently trigger the hook’s execution. This allows attackers to execute arbitrary code within the n8n environment, potentially compromising the system and any connected credentials or workflows. This vulnerability is fixed in 1.113.0. |
| n8n is an open source workflow automation platform. From 1.24.0 to before 1.107.0, there is a stored cross-site scripting (XSS) vulnerability in @n8n/n8n-nodes-langchain.chatTrigger. An authorized user can configure the LangChain Chat Trigger node with malicious JavaScript in the initialMessages field and enable public access so that the payload is executed in the browser of any user who visits the resulting public chat URL. This can be used for phishing or to steal cookies or other sensitive data from users accessing the public chat link. The issue is fixed in version 1.107.0. Updating to 1.107.0 or later is recommended. As a workaround, the affected chatTrigger node can be disabled. No other workarounds are known. |
| n8n-workflows Main Commit ee25413 allows attackers to execute a directory traversal via the download_workflow function within api_server.py |
| An arbitrary file upload vulnerability in the Chat Trigger component of N8N v1.95.3, v1.100.1, and v1.101.1 allows attackers to execute arbitrary code via uploading a crafted HTML file. |
| n8n is a workflow automation platform. Prior to version 1.99.1, an authorization vulnerability was discovered in the /rest/executions/:id/stop endpoint of n8n. An authenticated user can stop workflow executions that they do not own or that have not been shared with them, leading to potential business disruption. This issue has been patched in version 1.99.1. A workaround involves restricting access to the /rest/executions/:id/stop endpoint via reverse proxy or API gateway. |
| n8n is a workflow automation platform. Prior to version 1.99.0, there is a denial of Service vulnerability in /rest/binary-data endpoint when processing empty filesystem URIs (filesystem:// or filesystem-v2://). This allows authenticated attackers to cause service unavailability through malformed filesystem URI requests, effecting the /rest/binary-data endpoint and n8n.cloud instances (confirmed HTTP/2 524 timeout responses). Attackers can exploit this by sending GET requests with empty filesystem URIs (filesystem:// or filesystem-v2://) to the /rest/binary-data endpoint, causing resource exhaustion and service disruption. This issue has been patched in version 1.99.0. |
| n8n is a workflow automation platform. From 1.77.0 to before 1.98.2, a stored Cross-Site Scripting (XSS) vulnerability was identified in n8n, specifically in the Form Trigger node's HTML form element. An authenticated attacker can inject malicious HTML via an <iframe> with a srcdoc payload that includes arbitrary JavaScript execution. The attacker can also inject malicious Javascript by using <video> coupled <source> using an onerror event. While using iframe or a combination of video and source tag, this vulnerability allows for Account Takeover (ATO) by exfiltrating n8n-browserId and session cookies from authenticated users who visit a maliciously crafted form. Using these tokens and cookies, an attacker can impersonate the victim and change account details such as email addresses, enabling full control over the account—especially if 2FA is not enabled. Users should upgrade to version >= 1.98.2. |
| n8n is a workflow automation platform. Before 1.106.0, a symlink traversal vulnerability was discovered in the Read/Write File node in n8n. While the node attempts to restrict access to sensitive directories and files, it does not properly account for symbolic links (symlinks). An attacker with the ability to create symlinks—such as by using the Execute Command node—could exploit this to bypass the intended directory restrictions and read from or write to otherwise inaccessible paths. Users of n8n.cloud are not impacted. Affected users should update to version 1.106.0 or later. |
