| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_tcpmss: check remaining length before reading optlen
Quoting reporter:
In net/netfilter/xt_tcpmss.c (lines 53-68), the TCP option parser reads
op[i+1] directly without validating the remaining option length.
If the last byte of the option field is not EOL/NOP (0/1), the code attempts
to index op[i+1]. In the case where i + 1 == optlen, this causes an
out-of-bounds read, accessing memory past the optlen boundary
(either reading beyond the stack buffer _opt or the
following payload). |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: delete attr leaf freemap entries when empty
Back in commit 2a2b5932db6758 ("xfs: fix attr leaf header freemap.size
underflow"), Brian Foster observed that it's possible for a small
freemap at the end of the end of the xattr entries array to experience
a size underflow when subtracting the space consumed by an expansion of
the entries array. There are only three freemap entries, which means
that it is not a complete index of all free space in the leaf block.
This code can leave behind a zero-length freemap entry with a nonzero
base. Subsequent setxattr operations can increase the base up to the
point that it overlaps with another freemap entry. This isn't in and of
itself a problem because the code in _leaf_add that finds free space
ignores any freemap entry with zero size.
However, there's another bug in the freemap update code in _leaf_add,
which is that it fails to update a freemap entry that begins midway
through the xattr entry that was just appended to the array. That can
result in the freemap containing two entries with the same base but
different sizes (0 for the "pushed-up" entry, nonzero for the entry
that's actually tracking free space). A subsequent _leaf_add can then
allocate xattr namevalue entries on top of the entries array, leading to
data loss. But fixing that is for later.
For now, eliminate the possibility of confusion by zeroing out the base
of any freemap entry that has zero size. Because the freemap is not
intended to be a complete index of free space, a subsequent failure to
find any free space for a new xattr will trigger block compaction, which
regenerates the freemap.
It looks like this bug has been in the codebase for quite a long time. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: ioam: fix heap buffer overflow in __ioam6_fill_trace_data()
On the receive path, __ioam6_fill_trace_data() uses trace->nodelen
to decide how much data to write for each node. It trusts this field
as-is from the incoming packet, with no consistency check against
trace->type (the 24-bit field that tells which data items are
present). A crafted packet can set nodelen=0 while setting type bits
0-21, causing the function to write ~100 bytes past the allocated
region (into skb_shared_info), which corrupts adjacent heap memory
and leads to a kernel panic.
Add a shared helper ioam6_trace_compute_nodelen() in ioam6.c to
derive the expected nodelen from the type field, and use it:
- in ioam6_iptunnel.c (send path, existing validation) to replace
the open-coded computation;
- in exthdrs.c (receive path, ipv6_hop_ioam) to drop packets whose
nodelen is inconsistent with the type field, before any data is
written.
Per RFC 9197, bits 12-21 are each short (4-octet) fields, so they
are included in IOAM6_MASK_SHORT_FIELDS (changed from 0xff100000 to
0xff1ffc00). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix signededness bug in smb_direct_prepare_negotiation()
smb_direct_prepare_negotiation() casts an unsigned __u32 value
from sp->max_recv_size and req->preferred_send_size to a signed
int before computing min_t(int, ...). A maliciously provided
preferred_send_size of 0x80000000 will return as smaller than
max_recv_size, and then be used to set the maximum allowed
alowed receive size for the next message.
By sending a second message with a large value (>1420 bytes)
the attacker can then achieve a heap buffer overflow.
This fix replaces min_t(int, ...) with min_t(u32) |
| In the Linux kernel, the following vulnerability has been resolved:
rnbd-srv: Zero the rsp buffer before using it
Before using the data buffer to send back the response message, zero it
completely. This prevents any stray bytes to be picked up by the client
side when there the message is exchanged between different protocol
versions. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: kaweth: remove TX queue manipulation in kaweth_set_rx_mode
kaweth_set_rx_mode(), the ndo_set_rx_mode callback, calls
netif_stop_queue() and netif_wake_queue(). These are TX queue flow
control functions unrelated to RX multicast configuration.
The premature netif_wake_queue() can re-enable TX while tx_urb is still
in-flight, leading to a double usb_submit_urb() on the same URB:
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb);
}
kaweth_set_rx_mode() {
netif_stop_queue();
netif_wake_queue(); // wakes TX queue before URB is done
}
kaweth_start_xmit() {
netif_stop_queue();
usb_submit_urb(kaweth->tx_urb); // URB submitted while active
}
This triggers the WARN in usb_submit_urb():
"URB submitted while active"
This is a similar class of bug fixed in rtl8150 by
- commit 958baf5eaee3 ("net: usb: Remove disruptive netif_wake_queue in rtl8150_set_multicast").
Also kaweth_set_rx_mode() is already functionally broken, the
real set_rx_mode action is performed by kaweth_async_set_rx_mode(),
which in turn is not a no-op only at ndo_open() time. |
| In the Linux kernel, the following vulnerability has been resolved:
procfs: fix possible double mmput() in do_procmap_query()
When user provides incorrectly sized buffer for build ID for PROCMAP_QUERY
we return with -ENAMETOOLONG error. After recent changes this condition
happens later, after we unlocked mmap_lock/per-VMA lock and did mmput(),
so original goto out is now wrong and will double-mmput() mm_struct. Fix
by jumping further to clean up only vm_file and name_buf. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtw89: pci: validate release report content before using for RTL8922DE
The commit 957eda596c76
("wifi: rtw89: pci: validate sequence number of TX release report")
does validation on existing chips, which somehow a release report of SKB
becomes malformed. As no clear cause found, add rules ahead for RTL8922DE
to avoid crash if it happens. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: iwlwifi: fix 22000 series SMEM parsing
If the firmware were to report three LMACs (which doesn't
exist in hardware) then using "fwrt->smem_cfg.lmac[2]" is
an overrun of the array. Reject such and use IWL_FW_CHECK
instead of WARN_ON in this function. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix interlaced plain identification for encoded extents
Only plain data whose start position and on-disk physical length are
both aligned to the block size should be classified as interlaced
plain extents. Otherwise, it must be treated as shifted plain extents.
This issue was found by syzbot using a crafted compressed image
containing plain extents with unaligned physical lengths, which can
cause OOB read in z_erofs_transform_plain(). |
| In the Linux kernel, the following vulnerability has been resolved:
udplite: Fix null-ptr-deref in __udp_enqueue_schedule_skb().
syzbot reported null-ptr-deref of udp_sk(sk)->udp_prod_queue. [0]
Since the cited commit, udp_lib_init_sock() can fail, as can
udp_init_sock() and udpv6_init_sock().
Let's handle the error in udplite_sk_init() and udplitev6_sk_init().
[0]:
BUG: KASAN: null-ptr-deref in instrument_atomic_read include/linux/instrumented.h:82 [inline]
BUG: KASAN: null-ptr-deref in atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline]
BUG: KASAN: null-ptr-deref in __udp_enqueue_schedule_skb+0x151/0x1480 net/ipv4/udp.c:1719
Read of size 4 at addr 0000000000000008 by task syz.2.18/2944
CPU: 1 UID: 0 PID: 2944 Comm: syz.2.18 Not tainted syzkaller #0 PREEMPTLAZY
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Call Trace:
<IRQ>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
kasan_report+0xa2/0xe0 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x264/0x2c0 mm/kasan/generic.c:200
instrument_atomic_read include/linux/instrumented.h:82 [inline]
atomic_read include/linux/atomic/atomic-instrumented.h:32 [inline]
__udp_enqueue_schedule_skb+0x151/0x1480 net/ipv4/udp.c:1719
__udpv6_queue_rcv_skb net/ipv6/udp.c:795 [inline]
udpv6_queue_rcv_one_skb+0xa2e/0x1ad0 net/ipv6/udp.c:906
udp6_unicast_rcv_skb+0x227/0x380 net/ipv6/udp.c:1064
ip6_protocol_deliver_rcu+0xe17/0x1540 net/ipv6/ip6_input.c:438
ip6_input_finish+0x191/0x350 net/ipv6/ip6_input.c:489
NF_HOOK+0x354/0x3f0 include/linux/netfilter.h:318
ip6_input+0x16c/0x2b0 net/ipv6/ip6_input.c:500
NF_HOOK+0x354/0x3f0 include/linux/netfilter.h:318
__netif_receive_skb_one_core net/core/dev.c:6149 [inline]
__netif_receive_skb+0xd3/0x370 net/core/dev.c:6262
process_backlog+0x4d6/0x1160 net/core/dev.c:6614
__napi_poll+0xae/0x320 net/core/dev.c:7678
napi_poll net/core/dev.c:7741 [inline]
net_rx_action+0x60d/0xdc0 net/core/dev.c:7893
handle_softirqs+0x209/0x8d0 kernel/softirq.c:622
do_softirq+0x52/0x90 kernel/softirq.c:523
</IRQ>
<TASK>
__local_bh_enable_ip+0xe7/0x120 kernel/softirq.c:450
local_bh_enable include/linux/bottom_half.h:33 [inline]
rcu_read_unlock_bh include/linux/rcupdate.h:924 [inline]
__dev_queue_xmit+0x109c/0x2dc0 net/core/dev.c:4856
__ip6_finish_output net/ipv6/ip6_output.c:-1 [inline]
ip6_finish_output+0x158/0x4e0 net/ipv6/ip6_output.c:219
NF_HOOK_COND include/linux/netfilter.h:307 [inline]
ip6_output+0x342/0x580 net/ipv6/ip6_output.c:246
ip6_send_skb+0x1d7/0x3c0 net/ipv6/ip6_output.c:1984
udp_v6_send_skb+0x9a5/0x1770 net/ipv6/udp.c:1442
udp_v6_push_pending_frames+0xa2/0x140 net/ipv6/udp.c:1469
udpv6_sendmsg+0xfe0/0x2830 net/ipv6/udp.c:1759
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0xe5/0x270 net/socket.c:742
__sys_sendto+0x3eb/0x580 net/socket.c:2206
__do_sys_sendto net/socket.c:2213 [inline]
__se_sys_sendto net/socket.c:2209 [inline]
__x64_sys_sendto+0xde/0x100 net/socket.c:2209
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xd2/0xf20 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7f67b4d9c629
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f67b5c98028 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007f67b5015fa0 RCX: 00007f67b4d9c629
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: 00007f67b4e32b39 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000040000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007f67b5016038 R14: 00007f67b5015fa0 R15: 00007ffe3cb66dd8
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: fix freemap adjustments when adding xattrs to leaf blocks
xfs/592 and xfs/794 both trip this assertion in the leaf block freemap
adjustment code after ~20 minutes of running on my test VMs:
ASSERT(ichdr->firstused >= ichdr->count * sizeof(xfs_attr_leaf_entry_t)
+ xfs_attr3_leaf_hdr_size(leaf));
Upon enabling quite a lot more debugging code, I narrowed this down to
fsstress trying to set a local extended attribute with namelen=3 and
valuelen=71. This results in an entry size of 80 bytes.
At the start of xfs_attr3_leaf_add_work, the freemap looks like this:
i 0 base 448 size 0 rhs 448 count 46
i 1 base 388 size 132 rhs 448 count 46
i 2 base 2120 size 4 rhs 448 count 46
firstused = 520
where "rhs" is the first byte past the end of the leaf entry array.
This is inconsistent -- the entries array ends at byte 448, but
freemap[1] says there's free space starting at byte 388!
By the end of the function, the freemap is in worse shape:
i 0 base 456 size 0 rhs 456 count 47
i 1 base 388 size 52 rhs 456 count 47
i 2 base 2120 size 4 rhs 456 count 47
firstused = 440
Important note: 388 is not aligned with the entries array element size
of 8 bytes.
Based on the incorrect freemap, the name area starts at byte 440, which
is below the end of the entries array! That's why the assertion
triggers and the filesystem shuts down.
How did we end up here? First, recall from the previous patch that the
freemap array in an xattr leaf block is not intended to be a
comprehensive map of all free space in the leaf block. In other words,
it's perfectly legal to have a leaf block with:
* 376 bytes in use by the entries array
* freemap[0] has [base = 376, size = 8]
* freemap[1] has [base = 388, size = 1500]
* the space between 376 and 388 is free, but the freemap stopped
tracking that some time ago
If we add one xattr, the entries array grows to 384 bytes, and
freemap[0] becomes [base = 384, size = 0]. So far, so good. But if we
add a second xattr, the entries array grows to 392 bytes, and freemap[0]
gets pushed up to [base = 392, size = 0]. This is bad, because
freemap[1] hasn't been updated, and now the entries array and the free
space claim the same space.
The fix here is to adjust all freemap entries so that none of them
collide with the entries array. Note that this fix relies on commit
2a2b5932db6758 ("xfs: fix attr leaf header freemap.size underflow") and
the previous patch that resets zero length freemap entries to have
base = 0. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: remove xfs_attr_leaf_hasname
The calling convention of xfs_attr_leaf_hasname() is problematic, because
it returns a NULL buffer when xfs_attr3_leaf_read fails, a valid buffer
when xfs_attr3_leaf_lookup_int returns -ENOATTR or -EEXIST, and a
non-NULL buffer pointer for an already released buffer when
xfs_attr3_leaf_lookup_int fails with other error values.
Fix this by simply open coding xfs_attr_leaf_hasname in the callers, so
that the buffer release code is done by each caller of
xfs_attr3_leaf_read. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/arm-cmn: Reject unsupported hardware configurations
So far we've been fairly lax about accepting both unknown CMN models
(at least with a warning), and unknown revisions of those which we
do know, as although things do frequently change between releases,
typically enough remains the same to be somewhat useful for at least
some basic bringup checks. However, we also make assumptions of the
maximum supported sizes and numbers of things in various places, and
there's no guarantee that something new might not be bigger and lead
to nasty array overflows. Make sure we only try to run on things that
actually match our assumptions and so will not risk memory corruption.
We have at least always failed on completely unknown node types, so
update that error message for clarity and consistency too. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm6: fix uninitialized saddr in xfrm6_get_saddr()
xfrm6_get_saddr() does not check the return value of
ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable
source address (returns -EADDRNOTAVAIL), saddr->in6 is left
uninitialized, but xfrm6_get_saddr() still returns 0 (success).
This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized
address in xfrm_state_find(), triggering KMSAN warning:
=====================================================
BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940
xfrm_state_find+0x2424/0xa940
xfrm_resolve_and_create_bundle+0x906/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
xfrm_lookup_route+0x63/0x2b0
ip_route_output_flow+0x1ce/0x270
udp_sendmsg+0x2ce1/0x3400
inet_sendmsg+0x1ef/0x2a0
__sock_sendmsg+0x278/0x3d0
__sys_sendto+0x593/0x720
__x64_sys_sendto+0x130/0x200
x64_sys_call+0x332b/0x3e70
do_syscall_64+0xd3/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable tmp.i.i created at:
xfrm_resolve_and_create_bundle+0x3e3/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
=====================================================
Fix by checking the return value of ipv6_dev_get_saddr() and propagating
the error. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix missing key size check for L2CAP_LE_CONN_REQ
This adds a check for encryption key size upon receiving
L2CAP_LE_CONN_REQ which is required by L2CAP/LE/CFC/BV-15-C which
expects L2CAP_CR_LE_BAD_KEY_SIZE. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Fix double free related to rereg_user_mr
If IB_MR_REREG_TRANS is set during rereg_user_mr, the
umem will be released and a new one will be allocated
in irdma_rereg_mr_trans. If any step of irdma_rereg_mr_trans
fails after the new umem is allocated, it releases the umem,
but does not set iwmr->region to NULL. The problem is that
this failure is propagated to the user, who will then call
ibv_dereg_mr (as they should). Then, the dereg_mr path will
see a non-NULL umem and attempt to call ib_umem_release again.
Fix this by setting iwmr->region to NULL after ib_umem_release.
Fixed: 5ac388db27c4 ("RDMA/irdma: Add support to re-register a memory region") |
| In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: fix use-after-free in roccat_report_event
roccat_report_event() iterates over the device->readers list without
holding the readers_lock. This allows a concurrent roccat_release() to
remove and free a reader while it's still being accessed, leading to a
use-after-free.
Protect the readers list traversal with the readers_lock mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: brcmfmac: validate bsscfg indices in IF events
brcmf_fweh_handle_if_event() validates the firmware-provided interface
index before it touches drvr->iflist[], but it still uses the raw
bsscfgidx field as an array index without a matching range check.
Reject IF events whose bsscfg index does not fit in drvr->iflist[]
before indexing the interface array.
[add missing wifi prefix] |
| In the Linux kernel, the following vulnerability has been resolved:
cachefiles: fix incorrect dentry refcount in cachefiles_cull()
The patch mentioned below changed cachefiles_bury_object() to expect 2
references to the 'rep' dentry. Three of the callers were changed to
use start_removing_dentry() which takes an extra reference so in those
cases the call gets the expected references.
However there is another call to cachefiles_bury_object() in
cachefiles_cull() which did not need to be changed to use
start_removing_dentry() and so was not properly considered.
It still passed the dentry with just one reference so the net result is
that a reference is lost.
To meet the expectations of cachefiles_bury_object(), cachefiles_cull()
must take an extra reference before the call. It will be dropped by
cachefiles_bury_object(). |
