| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: liquidio: Initialize netdev pointer before queue setup
In setup_nic_devices(), the netdev is allocated using alloc_etherdev_mq().
However, the pointer to this structure is stored in oct->props[i].netdev
only after the calls to netif_set_real_num_rx_queues() and
netif_set_real_num_tx_queues().
If either of these functions fails, setup_nic_devices() returns an error
without freeing the allocated netdev. Since oct->props[i].netdev is still
NULL at this point, the cleanup function liquidio_destroy_nic_device()
will fail to find and free the netdev, resulting in a memory leak.
Fix this by initializing oct->props[i].netdev before calling the queue
setup functions. This ensures that the netdev is properly accessible for
cleanup in case of errors.
Compile tested only. Issue found using a prototype static analysis tool
and code review. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rw: free potentially allocated iovec on cache put failure
If a read/write request goes through io_req_rw_cleanup() and has an
allocated iovec attached and fails to put to the rw_cache, then it may
end up with an unaccounted iovec pointer. Have io_rw_recycle() return
whether it recycled the request or not, and use that to gauge whether to
free a potential iovec or not. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: release admin tagset if init fails
nvme_fabrics creates an NVMe/FC controller in following path:
nvmf_dev_write()
-> nvmf_create_ctrl()
-> nvme_fc_create_ctrl()
-> nvme_fc_init_ctrl()
nvme_fc_init_ctrl() allocates the admin blk-mq resources right after
nvme_add_ctrl() succeeds. If any of the subsequent steps fail (changing
the controller state, scheduling connect work, etc.), we jump to the
fail_ctrl path, which tears down the controller references but never
frees the admin queue/tag set. The leaked blk-mq allocations match the
kmemleak report seen during blktests nvme/fc.
Check ctrl->ctrl.admin_tagset in the fail_ctrl path and call
nvme_remove_admin_tag_set() when it is set so that all admin queue
allocations are reclaimed whenever controller setup aborts. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: rivafb: fix divide error in nv3_arb()
A userspace program can trigger the RIVA NV3 arbitration code by calling
the FBIOPUT_VSCREENINFO ioctl on /dev/fb*. When doing so, the driver
recomputes FIFO arbitration parameters in nv3_arb(), using state->mclk_khz
(derived from the PRAMDAC MCLK PLL) as a divisor without validating it
first.
In a normal setup, state->mclk_khz is provided by the real hardware and is
non-zero. However, an attacker can construct a malicious or misconfigured
device (e.g. a crafted/emulated PCI device) that exposes a bogus PLL
configuration, causing state->mclk_khz to become zero. Once
nv3_get_param() calls nv3_arb(), the division by state->mclk_khz in the gns
calculation causes a divide error and crashes the kernel.
Fix this by checking whether state->mclk_khz is zero and bailing out before
doing the division.
The following log reveals it:
rivafb: setting virtual Y resolution to 2184
divide error: 0000 [#1] PREEMPT SMP KASAN PTI
CPU: 0 PID: 2187 Comm: syz-executor.0 Not tainted 5.18.0-rc1+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
RIP: 0010:nv3_arb drivers/video/fbdev/riva/riva_hw.c:439 [inline]
RIP: 0010:nv3_get_param+0x3ab/0x13b0 drivers/video/fbdev/riva/riva_hw.c:546
Call Trace:
nv3CalcArbitration.constprop.0+0x255/0x460 drivers/video/fbdev/riva/riva_hw.c:603
nv3UpdateArbitrationSettings drivers/video/fbdev/riva/riva_hw.c:637 [inline]
CalcStateExt+0x447/0x1b90 drivers/video/fbdev/riva/riva_hw.c:1246
riva_load_video_mode+0x8a9/0xea0 drivers/video/fbdev/riva/fbdev.c:779
rivafb_set_par+0xc0/0x5f0 drivers/video/fbdev/riva/fbdev.c:1196
fb_set_var+0x604/0xeb0 drivers/video/fbdev/core/fbmem.c:1033
do_fb_ioctl+0x234/0x670 drivers/video/fbdev/core/fbmem.c:1109
fb_ioctl+0xdd/0x130 drivers/video/fbdev/core/fbmem.c:1188
__x64_sys_ioctl+0x122/0x190 fs/ioctl.c:856 |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: validate DFA start states are in bounds in unpack_pdb
Start states are read from untrusted data and used as indexes into the
DFA state tables. The aa_dfa_next() function call in unpack_pdb() will
access dfa->tables[YYTD_ID_BASE][start], and if the start state exceeds
the number of states in the DFA, this results in an out-of-bound read.
==================================================================
BUG: KASAN: slab-out-of-bounds in aa_dfa_next+0x2a1/0x360
Read of size 4 at addr ffff88811956fb90 by task su/1097
...
Reject policies with out-of-bounds start states during unpacking
to prevent the issue. |
| Missing authentication in the /goform/ate endpoint in Nexxt Solutions Nebula 300+ firmware through version 12.01.01.37 allows an adjacent unauthenticated attacker to retrieve sensitive device information, including the administrator password. The endpoint returns a raw response containing parameters such as Login_PW, which is Base64-encoded. An attacker can decode this value to obtain valid administrative credentials and authenticate to the device. |
| Hidden functionality in the /goform/setSysTools endpoint in Nexxt Solutions Nebula 300+ firmware through version 12.01.01.37 allows remote enablement of a Telnet service. By sending a crafted POST request with parameters such as telnetManageEn=true and telnetPwd, an authenticated attacker can activate a Telnet service on port 23. This exposes a privileged diagnostic interface that is not intended for external access and can be used to interact with the underlying system. |
| Nexxt Solutions Nebula 300+ firmware through version 12.01.01.37 uses the ecos_pw cookie for authentication, which contains Base64-encoded credential data combined with a static suffix. Because the encoding is reversible and lacks integrity protection, an attacker can reconstruct or forge a valid cookie value without proper authentication. This allows unauthorized administrative access to protected endpoints. |
| Nexxt Solutions Nebula 300+ firmware through version 12.01.01.37 does not implement CSRF protections on state-changing endpoints such as /goform/setSysTools and other administrative interfaces. As a result, an attacker can craft malicious web requests that are executed in the context of an authenticated administrator’s browser, leading to unauthorized configuration changes, including enabling services or modifying system settings. |
| Nexxt Solutions Nebula 300+ firmware through version 12.01.01.37 stores sensitive information, including administrative credentials and WiFi pre-shared keys, in plaintext within exported configuration backup files. These backup files can be obtained through legitimate functionality or other weaknesses and do not apply encryption or hashing, allowing attackers to directly extract sensitive information. |
| Nexxt Solutions Nebula 300+ firmware through version 12.01.01.37 does not implement rate limiting or account lockout mechanisms on authentication interfaces. An attacker can perform unlimited authentication attempts against endpoints that rely on credential validation, enabling brute-force attacks to guess administrative credentials without restriction. |
| In N2W before 4.3.2 and 4.4.0 before 4.4.1, improper validation of API request parameters enables remote code execution. |
| In N2W before 4.3.2 and 4.4.x before 4.4.1, there is potential remote code execution and account credentials theft because of a spoofing vulnerability. |
| Cryptomator encrypts data being stored on cloud infrastructure. Prior to version 1.19.1, an integrity check vulnerability allows an attacker to tamper with the vault configuration file leading to a man-in-the-middle vulnerability in Hub key loading mechanism. Before this fix, the client trusted endpoints from the vault config without host authenticity checks, which could allow token exfiltration by mixing a legitimate auth endpoint with a malicious API endpoint. Impacted are users unlocking Hub-backed vaults with affected client versions in environments where an attacker can alter the vault.cryptomator file. This issue has been patched in version 1.19.1. |
| A permissions issue was addressed with additional restrictions. This issue is fixed in macOS Tahoe 26.4. An app may bypass Gatekeeper checks. |
| A privacy issue was addressed with improved handling of user preferences. This issue is fixed in iOS 26.4 and iPadOS 26.4, macOS Sequoia 15.7.5, macOS Sonoma 14.8.5, macOS Tahoe 26.4. "Hide IP Address" and "Block All Remote Content" may not apply to all mail content. |
| A privacy issue was addressed with improved handling of temporary files. This issue is fixed in macOS Sequoia 15.7.4, macOS Tahoe 26.3. An app may be able to capture a user's screen. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix oops due to uninitialised var in smb2_unlink()
If SMB2_open_init() or SMB2_close_init() fails (e.g. reconnect), the
iovs set @rqst will be left uninitialised, hence calling
SMB2_open_free(), SMB2_close_free() or smb2_set_related() on them will
oops.
Fix this by initialising @close_iov and @open_iov before setting them
in @rqst. |
| In the Linux kernel, the following vulnerability has been resolved:
net: vxlan: fix nd_tbl NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. If an IPv6 packet is injected into the interface,
route_shortcircuit() is called and a NULL pointer dereference happens on
neigh_lookup().
BUG: kernel NULL pointer dereference, address: 0000000000000380
Oops: Oops: 0000 [#1] SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x20/0x270
[...]
Call Trace:
<TASK>
vxlan_xmit+0x638/0x1ef0 [vxlan]
dev_hard_start_xmit+0x9e/0x2e0
__dev_queue_xmit+0xbee/0x14e0
packet_sendmsg+0x116f/0x1930
__sys_sendto+0x1f5/0x200
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x12f/0x1590
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Fix this by adding an early check on route_shortcircuit() when protocol
is ETH_P_IPV6. Note that ipv6_mod_enabled() cannot be used here because
VXLAN can be built-in even when IPv6 is built as a module. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: ccp - Fix use-after-free on error path
In the error path of sev_tsm_init_locked(), the code dereferences 't'
after it has been freed with kfree(). The pr_err() statement attempts
to access t->tio_en and t->tio_init_done after the memory has been
released.
Move the pr_err() call before kfree(t) to access the fields while the
memory is still valid.
This issue reported by Smatch static analyser |
