| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in libssh where it can attempt to open arbitrary files during configuration parsing. A local attacker can exploit this by providing a malicious configuration file or when the system is misconfigured. This vulnerability could lead to a Denial of Service (DoS) by causing the system to try and access dangerous files, such as block devices or large system files, which can disrupt normal operations. |
| `yaml` is a YAML parser and serialiser for JavaScript. Parsing a YAML document with a version of `yaml` on the 1.x branch prior to 1.10.3 or on the 2.x branch prior to 2.8.3 may throw a RangeError due to a stack overflow. The node resolution/composition phase uses recursive function calls without a depth bound. An attacker who can supply YAML for parsing can trigger a `RangeError: Maximum call stack size exceeded` with a small payload (~2–10 KB). The `RangeError` is not a `YAMLParseError`, so applications that only catch YAML-specific errors will encounter an unexpected exception type. Depending on the host application's exception handling, this can fail requests or terminate the Node.js process. Flow sequences allow deep nesting with minimal bytes (2 bytes per level: one `[` and one `]`). On the default Node.js stack, approximately 1,000–5,000 levels of nesting (2–10 KB input) exhaust the call stack. The exact threshold is environment-dependent (Node.js version, stack size, call stack depth at invocation). Note: the library's `Parser` (CST phase) uses a stack-based iterative approach and is not affected. Only the compose/resolve phase uses actual call-stack recursion. All three public parsing APIs are affected: `YAML.parse()`, `YAML.parseDocument()`, and `YAML.parseAllDocuments()`. Versions 1.10.3 and 2.8.3 contain a patch. |
| Ruckus Unleashed contains a remote code execution vulnerability in the web-based management interface that allows authenticated remote attackers to execute arbitrary code on the system when gateway mode is enabled. Attackers can exploit this vulnerability by sending specially crafted requests through the management interface to achieve arbitrary code execution on affected systems. |
| In the Drupal 7 Internationalization (i18n) module, the i18n_node submodule allows a user with both "Translate content" and "Administer content translations" permissions to view and attach unpublished nodes via the translation UI and its autocomplete widget. This bypasses intended access controls and discloses unpublished node titles and IDs.
Exploit affects versions 7.x-1.0 up to and including 7.x-1.35. |
| A malicious SCP server can send unexpected paths that could make the
client application override local files outside of working directory.
This could be misused to create malicious executable or configuration
files and make the user execute them under specific consequences.
This is the same issue as in OpenSSH, tracked as CVE-2019-6111. |
| The API function `ssh_get_hexa()` is vulnerable, when 0-lenght
input is provided to this function. This function is used internally
in `ssh_get_fingerprint_hash()` and `ssh_print_hexa()` (deprecated),
which is vulnerable to the same input (length is provided by the
calling application).
The function is also used internally in the gssapi code for logging
the OIDs received by the server during GSSAPI authentication. This
could be triggered remotely, when the server allows GSSAPI authentication
and logging verbosity is set at least to SSH_LOG_PACKET (3). This
could cause self-DoS of the per-connection daemon process. |
| A flaw was found in libssh. A remote attacker, by controlling client configuration files or known_hosts files, could craft specific hostnames that when processed by the `match_pattern()` function can lead to inefficient regular expression backtracking. This can cause timeouts and resource exhaustion, resulting in a Denial of Service (DoS) for the client. |
| The Conditional Menus plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.2.6. This is due to missing nonce validation on the 'save_options' function. This makes it possible for unauthenticated attackers to modify conditional menu assignments via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| The Elementor Website Builder plugin for WordPress is vulnerable to Incorrect Authorization to Sensitive Information Exposure in all versions up to, and including, 3.35.7. This is due to a logic error in the is_allowed_to_read_template() function permission check that treats non-published templates as readable without verifying edit capabilities. This makes it possible for authenticated attackers, with contributor-level access and above, to read private or draft Elementor template content via the 'template_id' supplied to the 'get_template_data' action of the 'elementor_ajax' endpoint. |
| The FloristPress for Woo – Customize your eCommerce store for your Florist plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'noresults' parameter in all versions up to, and including, 7.8.2 due to insufficient input sanitization and output escaping on the user supplied 'noresults' parameter. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| A flaw was found in p11-kit. A remote attacker could exploit this vulnerability by calling the C_DeriveKey function on a remote token with specific IBM kyber or IBM btc derive mechanism parameters set to NULL. This could lead to the RPC-client attempting to return an uninitialized value, potentially resulting in a NULL dereference or undefined behavior. This issue may cause an application level denial of service or other unpredictable system states. |
| The Fluent Booking plugin for WordPress is vulnerable to Stored Cross-Site Scripting via multiple parameters in all versions up to, and including, 2.0.01 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A flaw was found in GIMP. Heap-buffer-overflow vulnerability exists in the fread_pascal_string function when processing a specially crafted PSD (Photoshop Document) file. This occurs because the buffer allocated for a Pascal string is not properly null-terminated, leading to an out-of-bounds read when strlen() is subsequently called. Successfully exploiting this vulnerability can cause the application to crash, resulting in an application level Denial of Service. |
| EVerest is an EV charging software stack. Prior to version 2026.02.0, an off-by-one check in IsoMux certificate filename handling causes a stack-based buffer overflow when a filename length equals `MAX_FILE_NAME_LENGTH` (100). A crafted filename in the certificate directory can overflow `file_names[idx]`, corrupting stack state and enabling potential code execution. Version 2026.02.0 contains a patch. |
| A flaw was found in GIMP. An integer overflow vulnerability exists when processing ICO image files, specifically in the `ico_read_info` and `ico_read_icon` functions. This issue arises because a size calculation for image buffers can wrap around due to a 32-bit integer evaluation, allowing oversized image headers to bypass security checks. A remote attacker could exploit this by providing a specially crafted ICO file, leading to a buffer overflow and memory corruption, which may result in an application level denial of service. |
| EVerest is an EV charging software stack. Prior to version 2026.02.0, `HomeplugMessage::setup_payload` trusts `len` after an `assert`; in release builds the check is removed, so oversized SLAC payloads are `memcpy`'d into a ~1497-byte stack buffer, corrupting the stack and enabling remote code execution from network-provided frames. Version 2026.02.0 contains a patch. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: fix NULL deref in mesh_matches_local()
mesh_matches_local() unconditionally dereferences ie->mesh_config to
compare mesh configuration parameters. When called from
mesh_rx_csa_frame(), the parsed action-frame elements may not contain a
Mesh Configuration IE, leaving ie->mesh_config NULL and triggering a
kernel NULL pointer dereference.
The other two callers are already safe:
- ieee80211_mesh_rx_bcn_presp() checks !elems->mesh_config before
calling mesh_matches_local()
- mesh_plink_get_event() is only reached through
mesh_process_plink_frame(), which checks !elems->mesh_config, too
mesh_rx_csa_frame() is the only caller that passes raw parsed elements
to mesh_matches_local() without guarding mesh_config. An adjacent
attacker can exploit this by sending a crafted CSA action frame that
includes a valid Mesh ID IE but omits the Mesh Configuration IE,
crashing the kernel.
The captured crash log:
Oops: general protection fault, probably for non-canonical address ...
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
Workqueue: events_unbound cfg80211_wiphy_work
[...]
Call Trace:
<TASK>
? __pfx_mesh_matches_local (net/mac80211/mesh.c:65)
ieee80211_mesh_rx_queued_mgmt (net/mac80211/mesh.c:1686)
[...]
ieee80211_iface_work (net/mac80211/iface.c:1754 net/mac80211/iface.c:1802)
[...]
cfg80211_wiphy_work (net/wireless/core.c:426)
process_one_work (net/kernel/workqueue.c:3280)
? assign_work (net/kernel/workqueue.c:1219)
worker_thread (net/kernel/workqueue.c:3352)
? __pfx_worker_thread (net/kernel/workqueue.c:3385)
kthread (net/kernel/kthread.c:436)
[...]
ret_from_fork_asm (net/arch/x86/entry/entry_64.S:255)
</TASK>
This patch adds a NULL check for ie->mesh_config at the top of
mesh_matches_local() to return false early when the Mesh Configuration
IE is absent. |
| In the Linux kernel, the following vulnerability has been resolved:
nfnetlink_osf: validate individual option lengths in fingerprints
nfnl_osf_add_callback() validates opt_num bounds and string
NUL-termination but does not check individual option length fields.
A zero-length option causes nf_osf_match_one() to enter the option
matching loop even when foptsize sums to zero, which matches packets
with no TCP options where ctx->optp is NULL:
Oops: general protection fault
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:nf_osf_match_one (net/netfilter/nfnetlink_osf.c:98)
Call Trace:
nf_osf_match (net/netfilter/nfnetlink_osf.c:227)
xt_osf_match_packet (net/netfilter/xt_osf.c:32)
ipt_do_table (net/ipv4/netfilter/ip_tables.c:293)
nf_hook_slow (net/netfilter/core.c:623)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
Additionally, an MSS option (kind=2) with length < 4 causes
out-of-bounds reads when nf_osf_match_one() unconditionally accesses
optp[2] and optp[3] for MSS value extraction. While RFC 9293
section 3.2 specifies that the MSS option is always exactly 4
bytes (Kind=2, Length=4), the check uses "< 4" rather than
"!= 4" because lengths greater than 4 do not cause memory
safety issues -- the buffer is guaranteed to be at least
foptsize bytes by the ctx->optsize == foptsize check.
Reject fingerprints where any option has zero length, or where an MSS
option has length less than 4, at add time rather than trusting these
values in the packet matching hot path. |
| In the Linux kernel, the following vulnerability has been resolved:
icmp: fix NULL pointer dereference in icmp_tag_validation()
icmp_tag_validation() unconditionally dereferences the result of
rcu_dereference(inet_protos[proto]) without checking for NULL.
The inet_protos[] array is sparse -- only about 15 of 256 protocol
numbers have registered handlers. When ip_no_pmtu_disc is set to 3
(hardened PMTU mode) and the kernel receives an ICMP Fragmentation
Needed error with a quoted inner IP header containing an unregistered
protocol number, the NULL dereference causes a kernel panic in
softirq context.
Oops: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017]
RIP: 0010:icmp_unreach (net/ipv4/icmp.c:1085 net/ipv4/icmp.c:1143)
Call Trace:
<IRQ>
icmp_rcv (net/ipv4/icmp.c:1527)
ip_protocol_deliver_rcu (net/ipv4/ip_input.c:207)
ip_local_deliver_finish (net/ipv4/ip_input.c:242)
ip_local_deliver (net/ipv4/ip_input.c:262)
ip_rcv (net/ipv4/ip_input.c:573)
__netif_receive_skb_one_core (net/core/dev.c:6164)
process_backlog (net/core/dev.c:6628)
handle_softirqs (kernel/softirq.c:561)
</IRQ>
Add a NULL check before accessing icmp_strict_tag_validation. If the
protocol has no registered handler, return false since it cannot
perform strict tag validation. |
| The Complianz – GDPR/CCPA Cookie Consent plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 7.4.4.2. This is due to the `revert_divs_to_summary` function replacing `”` HTML entities with literal double-quote characters (`"`) in post content without subsequent sanitization. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses the injected page. The Classic Editor plugin is required to be installed and activated in order to exploit this vulnerability. |
