| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in JingDong JD Cloud Box AX6600 up to 4.5.1.r4533. This affects the function web_get_ddns_uptime of the file /jdcapi of the component jdcweb_rpc. Performing a manipulation results in Remote Privilege Escalation. The attack is possible to be carried out remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in JingDong JD Cloud Box AX6600 up to 4.5.1.r4533. This impacts the function cast_streen of the file /jdcapi of the component jdcweb_rpc. Executing a manipulation of the argument File can lead to Remote Privilege Escalation. The attack may be performed from remote. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in JingDong JD Cloud Box AX6600 up to 4.5.1.r4533. Affected is the function set_stcreenen_deabled_status/get_status of the file /f/service/controlDevice of the component jdcapp_rpc. The manipulation leads to Remote Privilege Escalation. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in Intelbras VIP 3260 Z IA 2.840.00IB005.0.T. Affected by this vulnerability is an unknown functionality of the file /OutsideCmd. The manipulation results in weak password recovery. It is possible to launch the attack remotely. Attacks of this nature are highly complex. The exploitation appears to be difficult. It is recommended to upgrade the affected component. |
| A security vulnerability has been detected in Wavlink WL-NU516U1 up to 130/260. This affects the function sub_406194 of the file /cgi-bin/adm.cgi. Such manipulation of the argument firmware_url leads to stack-based buffer overflow. The attack can be launched remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Zarinpal Gateway for WooCommerce plugin for WordPress is vulnerable to Improper Access Control to Payment Status Update in all versions up to and including 5.0.16. This is due to the payment callback handler 'Return_from_ZarinPal_Gateway' failing to validate that the authority token provided in the callback URL belongs to the specific order being marked as paid. This makes it possible for unauthenticated attackers to potentially mark orders as paid without proper payment by reusing a valid authority token from a different transaction of the same amount. |
| The Kadence Blocks — Page Builder Toolkit for Gutenberg Editor plugin for WordPress is vulnerable to unauthorized access due to a missing capability check on a function in all versions up to, and including, 3.5.32. This makes it possible for authenticated attackers, with Contributor-level access and above, to perform an unauthorized action. |
| A vulnerability has been found in Beetel 777VR1 up to 01.00.09. The impacted element is an unknown function of the component Web Management Interface. The manipulation leads to hard-coded credentials. The attack needs to be initiated within the local network. The exploit has been disclosed to the public and may be used. It is advisable to modify the configuration settings. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Beetel 777VR1 up to 01.00.09. This affects an unknown function of the component Telnet Service/SSH Service. The manipulation results in insecure default initialization of resource. The attack can only be performed from the local network. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in Beetel 777VR1 up to 01.00.09. This impacts an unknown function of the component SSH Service. This manipulation causes risky cryptographic algorithm. The attack is possible to be carried out remotely. The attack is considered to have high complexity. The exploitability is said to be difficult. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| LightLLM version 1.1.0 and prior contain an unauthenticated remote code execution vulnerability in PD (prefill-decode) disaggregation mode. The PD master node exposes WebSocket endpoints that receive binary frames and pass the data directly to pickle.loads() without authentication or validation. A remote attacker who can reach the PD master can send a crafted payload to achieve arbitrary code execution. |
| eNet SMART HOME server 2.2.1 and 2.3.1 contains a privilege escalation vulnerability due to insufficient authorization checks in the setUserGroup JSON-RPC method. A low-privileged user (UG_USER) can send a crafted POST request to /jsonrpc/management specifying their own username to elevate their account to the UG_ADMIN group, bypassing intended access controls and gaining administrative capabilities such as modifying device configurations, network settings, and other smart home system functions. |
| SmarterTools SmarterMail before 9526 allows XSS via MAPI requests. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wlcore: ensure skb headroom before skb_push
This avoids occasional skb_under_panic Oops from wl1271_tx_work. In this case, headroom is
less than needed (typically 110 - 94 = 16 bytes). |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix ECMP sibling count mismatch when clearing RTF_ADDRCONF
syzbot reported a kernel BUG in fib6_add_rt2node() when adding an IPv6
route. [0]
Commit f72514b3c569 ("ipv6: clear RA flags when adding a static
route") introduced logic to clear RTF_ADDRCONF from existing routes
when a static route with the same nexthop is added. However, this
causes a problem when the existing route has a gateway.
When RTF_ADDRCONF is cleared from a route that has a gateway, that
route becomes eligible for ECMP, i.e. rt6_qualify_for_ecmp() returns
true. The issue is that this route was never added to the
fib6_siblings list.
This leads to a mismatch between the following counts:
- The sibling count computed by iterating fib6_next chain, which
includes the newly ECMP-eligible route
- The actual siblings in fib6_siblings list, which does not include
that route
When a subsequent ECMP route is added, fib6_add_rt2node() hits
BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings) because the
counts don't match.
Fix this by only clearing RTF_ADDRCONF when the existing route does
not have a gateway. Routes without a gateway cannot qualify for ECMP
anyway (rt6_qualify_for_ecmp() requires fib_nh_gw_family), so clearing
RTF_ADDRCONF on them is safe and matches the original intent of the
commit.
[0]:
kernel BUG at net/ipv6/ip6_fib.c:1217!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 6010 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
RIP: 0010:fib6_add_rt2node+0x3433/0x3470 net/ipv6/ip6_fib.c:1217
[...]
Call Trace:
<TASK>
fib6_add+0x8da/0x18a0 net/ipv6/ip6_fib.c:1532
__ip6_ins_rt net/ipv6/route.c:1351 [inline]
ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3946
ipv6_route_ioctl+0x35c/0x480 net/ipv6/route.c:4571
inet6_ioctl+0x219/0x280 net/ipv6/af_inet6.c:577
sock_do_ioctl+0xdc/0x300 net/socket.c:1245
sock_ioctl+0x576/0x790 net/socket.c:1366
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| Apache NiFi 1.1.0 through 2.7.2 are missing authorization when updating configuration properties on extension components that have specific Required Permissions based on the Restricted annotation. The Restricted annotation indicates additional privileges required to add the annotated component to the flow configuration, but framework authorization did not check restricted status when updating a component previously added. The missing authorization requires a more privileged user to add a restricted component to the flow configuration, but permits a less privileged user to make property configuration changes. Apache NiFi installations that do not implement different levels of authorization for Restricted components are not subject to this vulnerability because the framework enforces write permissions as the security boundary. Upgrading to Apache NiFi 2.8.0 is the recommended mitigation. |
| Glory RBG-100 recycler systems using the ISPK-08 software component contain multiple system binaries with overly permissive file permissions. Several binaries executed by the root user are writable and executable by unprivileged local users. An attacker with local access can replace or modify these binaries to execute arbitrary commands with root privileges, enabling local privilege escalation. |
| Smoothwall Express 3.1-SP4-polar-x86_64-update9 contains stored and reflected cross-site scripting vulnerabilities in the urlfilter.cgi endpoint that allow attackers to inject malicious scripts. Attackers can submit POST requests with script payloads in the REDIRECT_PAGE or CHILDREN parameters to execute arbitrary JavaScript in user browsers. |
| Smoothwall Express 3.1-SP4-polar-x86_64-update9 contains multiple reflected cross-site scripting vulnerabilities in the dhcp.cgi script that allow attackers to inject malicious scripts through multiple parameters. Attackers can submit POST requests to dhcp.cgi with script payloads in parameters such as BOOT_SERVER, BOOT_FILE, BOOT_ROOT, START_ADDR, END_ADDR, DNS1, DNS2, NTP1, NTP2, WINS1, WINS2, DEFAULT_LEASE_TIME, MAX_LEASE_TIME, DOMAIN_NAME, NIS_DOMAIN, NIS1, NIS2, STATIC_HOST, STATIC_DESC, STATIC_MAC, and STATIC_IP to execute arbitrary JavaScript in user browsers. |
| Smoothwall Express 3.1-SP4-polar-x86_64-update9 contains multiple reflected cross-site scripting vulnerabilities in the hosts.cgi script that allow attackers to inject malicious scripts through unvalidated parameters. Attackers can submit POST requests to the hosts.cgi endpoint with script payloads in the IP, HOSTNAME, or COMMENT parameters to execute arbitrary JavaScript in users' browsers. |
