| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Nginx UI is a web user interface for the Nginx web server. From version 2.0.0 to before version 2.3.8, an unauthenticated network attacker can claim the initial administrator account on a fresh nginx-ui instance during the first-run setup window. The public /api/install endpoint is reachable without authentication, and the request-encryption flow only protects payload confidentiality in transit; it does not authenticate who is allowed to perform installation. A remote attacker who reaches the service before the legitimate operator can set the admin email, username, and password, causing permanent initial-instance takeover. This issue has been patched in version 2.3.8. |
| Crypt::SecretBuffer versions before 0.019 for Perl is suseceptible to timing attacks.
For example, if Crypt::SecretBuffer was used to store and compare plaintext passwords, then discrepencies in timing could be used to guess the secret password. |
| Nginx UI is a web user interface for the Nginx web server. Prior to version 2.3.8, an authenticated user can call GET /api/settings and retrieve sensitive configuration values, including node.secret. The same node.secret is accepted by AuthRequired() through the X-Node-Secret header (or node_secret query parameter), causing the request to be treated as authenticated via the trusted-node path and associated with the init user. This issue has been patched in version 2.3.8. |
| Apache::Session::Generate::ModUniqueId versions from 1.54 through 1.94 for Perl session ids are insecure.
Apache::Session::Generate::ModUniqueId (added in version 1.54) uses the value of the UNIQUE_ID environment variable for the session id. The UNIQUE_ID variable is set by the Apache mod_unique_id plugin, which generates unique ids for the request. The id is based on the IPv4 address, the process id, the epoch time, a 16-bit counter and a thread index, with no obfuscation.
The server IP is often available to the public, and if not available, can be guessed from previous session ids being issued. The process ids may also be guessed from previous session ids. The timestamp is easily guessed (and leaked in the HTTP Date response header).
The purpose of mod_unique_id is to assign a unique id to requests so that events can be correlated in different logs. The id is not designed, nor is it suitable for security purposes. |
| Gazelle versions through 0.49 for Perl allows HTTP Request Smuggling via Improper Header Precedence.
Gazelle incorrectly prioritizes "Content-Length" over "Transfer-Encoding: chunked" when both headers are present in an HTTP request. Per RFC 7230 3.3.3, Transfer-Encoding must take precedence.
An attacker could exploit this to smuggle malicious HTTP requests via a front-end reverse proxy. |
| Improper Verification of Cryptographic Signature vulnerability in liuyueyi quick-media (plugins/svg-plugin/batik-codec-fix/src/main/java/org/apache/batik/ext/awt/image/codec/util modules). This vulnerability is associated with program files SeekableOutputStream.Java.
This issue affects quick-media: before v1.0. |
| Improper Control of Generation of Code ('Code Injection') vulnerability in liuyueyi quick-media (plugins/svg-plugin/batik-codec-fix/src/main/java/org/apache/batik/ext/awt/image/codec/png modules). This vulnerability is associated with program files PNGImageEncoder.Java.
This issue affects quick-media: before v1.0. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, the fix for GHSA-f3f2-mcxc-pwjx did not cover the Snowflake node or the legacy MySQL v1 node. Both nodes construct SQL queries by directly interpolating user-controlled table names, column names, and update keys into query strings without identifier escaping, enabling SQL injection against the connected database. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, the MCP OAuth client registration endpoint accepted unauthenticated requests and stored client data without adequate resource controls. An unauthenticated remote attacker could exhaust server memory resources by sending large registration payloads, rendering the n8n instance unavailable. The MCP enable/disable toggle gates MCP access but did not restrict client registrations, meaning the endpoint is reachable regardless of whether MCP access is enabled on the instance. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, an authenticated user with permission to create or modify workflows could achieve global prototype pollution via the XML Node leading to RCE when combined with other nodes exploiting the prototype pollution. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix not releasing workqueue on .release()
The workqueue associated with an DSA/IAA device is not released when
the object is freed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/vc4: platform_get_irq_byname() returns an int
platform_get_irq_byname() will return a negative value if an error
happens, so it should be checked and not just passed directly into
devm_request_threaded_irq() hoping all will be ok. |
| In the Linux kernel, the following vulnerability has been resolved:
most: core: fix resource leak in most_register_interface error paths
The function most_register_interface() did not correctly release resources
if it failed early (before registering the device). In these cases, it
returned an error code immediately, leaking the memory allocated for the
interface.
Fix this by initializing the device early via device_initialize() and
calling put_device() on all error paths.
The most_register_interface() is expected to call put_device() on
error which frees the resources allocated in the caller. The
put_device() either calls release_mdev() or dim2_release(),
depending on the caller.
Switch to using device_add() instead of device_register() to handle
the split initialization. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Fix "scheduling while atomic" in IPsec MAC address query
Fix a "scheduling while atomic" bug in mlx5e_ipsec_init_macs() by
replacing mlx5_query_mac_address() with ether_addr_copy() to get the
local MAC address directly from netdev->dev_addr.
The issue occurs because mlx5_query_mac_address() queries the hardware
which involves mlx5_cmd_exec() that can sleep, but it is called from
the mlx5e_ipsec_handle_event workqueue which runs in atomic context.
The MAC address is already available in netdev->dev_addr, so no need
to query hardware. This avoids the sleeping call and resolves the bug.
Call trace:
BUG: scheduling while atomic: kworker/u112:2/69344/0x00000200
__schedule+0x7ab/0xa20
schedule+0x1c/0xb0
schedule_timeout+0x6e/0xf0
__wait_for_common+0x91/0x1b0
cmd_exec+0xa85/0xff0 [mlx5_core]
mlx5_cmd_exec+0x1f/0x50 [mlx5_core]
mlx5_query_nic_vport_mac_address+0x7b/0xd0 [mlx5_core]
mlx5_query_mac_address+0x19/0x30 [mlx5_core]
mlx5e_ipsec_init_macs+0xc1/0x720 [mlx5_core]
mlx5e_ipsec_build_accel_xfrm_attrs+0x422/0x670 [mlx5_core]
mlx5e_ipsec_handle_event+0x2b9/0x460 [mlx5_core]
process_one_work+0x178/0x2e0
worker_thread+0x2ea/0x430 |
| n8n is an open source workflow automation platform. Prior to versions 1.123.32, 2.17.4, and 2.18.1, a flaw in the xml2js library used to parse XML request bodies in n8n's webhook handler allowed prototype pollution via a crafted XML payload. An authenticated user with permission to create or modify workflows could exploit this to pollute the JavaScript object prototype and, by chaining the pollution with the Git node's SSH operations, achieve remote code execution on the n8n host. This issue has been patched in versions 1.123.32, 2.17.4, and 2.18.1. |
| gopls by default communicates via pipe. However, -port and -listen flags are supported as means of debugging.
If -listen is given a value without an explicit host (e.g. :8080), or -port is used, gopls will listen on 0.0.0.0.
As a result, users might inadvertently cause gopls to bind 0.0.0.0.
This can allow a malicious party on the same network to execute code arbitrarily via gopls. |
| The bson_validate function may return early on specific inputs and incorrectly report success. This behavior could result in skipping validation for BSON data, allowing malformed or invalid UTF-8 sequences to bypass validation and be processed incorrectly. The issue may affect applications that rely on these functions to validate untrusted BSON data before further processing. This issue affects MongoDB C Driver versions prior to 1.30.5, MongoDB C Driver version 2.0.0 and MongoDB C Driver version 2.0.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix list corruption and UAF in command complete handlers
Commit 302a1f674c00 ("Bluetooth: MGMT: Fix possible UAFs") introduced
mgmt_pending_valid(), which not only validates the pending command but
also unlinks it from the pending list if it is valid. This change in
semantics requires updates to several completion handlers to avoid list
corruption and memory safety issues.
This patch addresses two left-over issues from the aforementioned rework:
1. In mgmt_add_adv_patterns_monitor_complete(), mgmt_pending_remove()
is replaced with mgmt_pending_free() in the success path. Since
mgmt_pending_valid() already unlinks the command at the beginning of
the function, calling mgmt_pending_remove() leads to a double list_del()
and subsequent list corruption/kernel panic.
2. In set_mesh_complete(), the use of mgmt_pending_foreach() in the error
path is removed. Since the current command is already unlinked by
mgmt_pending_valid(), this foreach loop would incorrectly target other
pending mesh commands, potentially freeing them while they are still being
processed concurrently (leading to UAFs). The redundant mgmt_cmd_status()
is also simplified to use cmd->opcode directly. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_ct: drop pending enqueued packets on removal
Packets sitting in nfqueue might hold a reference to:
- templates that specify the conntrack zone, because a percpu area is
used and module removal is possible.
- conntrack timeout policies and helper, where object removal leave
a stale reference.
Since these objects can just go away, drop enqueued packets to avoid
stale reference to them.
If there is a need for finer grain removal, this logic can be revisited
to make selective packet drop upon dependencies. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250: Fix TX deadlock when using DMA
`dmaengine_terminate_async` does not guarantee that the
`__dma_tx_complete` callback will run. The callback is currently the
only place where `dma->tx_running` gets cleared. If the transaction is
canceled and the callback never runs, then `dma->tx_running` will never
get cleared and we will never schedule new TX DMA transactions again.
This change makes it so we clear `dma->tx_running` after we terminate
the DMA transaction. This is "safe" because `serial8250_tx_dma_flush`
is holding the UART port lock. The first thing the callback does is also
grab the UART port lock, so access to `dma->tx_running` is serialized. |
