| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: don't inherit MNT_UMOUNT in clone_mnt()
MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has
taken out of its namespace. It's never cleared. __detach_mounts()
unhooks a mount that carries it instead of unmounting it.
disconnect_mount() lets an unmounted child stay attached only if its
parent carries it. propagate_umount() takes it as the sign that a mount
is going to be unmounted when it decides what else can be unmounted,
where a chain of locked mounts ends and where a for reparenting an
overmount.
clone_mnt() copies the flags of the source and only masks
MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was
lazily unmounted but is kept alive by a file descriptor can still be
copied when its root is an nsfs or pidfs file because may_copy_tree()
accepts those before checking whether the source is mounted at all:
mount --bind /proc/self/ns/net /tmp/x
exec 3< /tmp/x
umount -l /tmp/x
mount --bind /proc/self/fd/3 /tmp/y
The mount on /tmp/y is attached to the caller's namespace with
MNT_UMOUNT already set and every copy of it inherits the flag again.
That causes a number of bugs:
- Unlink its mountpoint from a mount namespace where it isn't one.
__detach_mounts() takes it for a mount that was unmounted earlier,
unhooks it from its parent and drops the reference the namespace
holds on it. It stays in the namespace with one reference too few
and as its own parent, so it can't be unmounted through the file
descriptor anymore and the namespace never finds it again. When the
namespace goes away it's leaked and points to a freed struct
mnt_namespace that may_change_propagation() and anon_ns_root() read
on the next propagation change or mount_setattr() through the file
descriptor.
- Make it shared and unmount a peer. trace_transfers() follows the
flag from the peer into it and strips it from its peer group.
- Let a propagated umount reach it. gather_candidates() marks it with
T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the
mark is never cleared and every later propagated umount skips it. If
it's the parent of a locked mount handle_locked() takes it as the
cutoff and commits the locked child that should have stayed and
disconnect_mount() leaves that child attached to it, unmounted under
a mounted parent, which is what disconnect_mount() exists to
prevent. When the namespace goes away umount_tree() visits the child
a second time. And once __detach_mounts() has made it its own parent
reparent() never finds the end of the chain of unmounted parents.
A clone is a new mount that has never been unmounted. Add MNT_UMOUNT
to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when
umount_tree() reaches a mount that already has it set. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/gem: Prevent overstepping exec array boundary
It is possible for eb_relocate_parse_slow() to call kvfree() on
entries outside the original exec array during following
scenario inside eb_relocate_parse_slow():
1) eb_copy_relocations() allocates as many as eb->buffer_count
copies for exec entries;
2) eb_parse() appends up to two VMAs, right after incrementing
eb->buffer_count;
3) cleanup under "out" label uses this incremented buffer_count
to release relocation pointers from exec array via kvfree(),
not from VMA array.
To amend this problem, ensure that relocation cleanup uses the
original exec object count, excluding the VMAs appended by the
command parser.
(cherry picked from commit 2a0158925fb943c7ba8f3216e2734952128defc9) |
| The Advanced Twenty Seventeen WordPress plugin through 1.3.1 does not perform any capability or nonce check on the action that creates and activates its bundled child , allowing any authenticated user such as a subscriber to switch the site's active site-wide, and allowing the same action to be triggered against any logged-in user including an administrator via CSRF. |
| Web::Simple versions before 0.035 for Perl allocate a buffer sized by the Content-Length header for urlencoded body parameters.
Web::Dispatch::ParamParser::get_unpacked_body_from reads an application/x-www-form-urlencoded body using a single read call, with no cap and the return value ignored. Perl's read grows the buffer to the requested length before reading, so the declared Content-Length determines the allocation.
An attacker can trigger this through any route whose dispatch specification has a % body-parameter match, such as sub (POST + %name=), sending a Content-Length far larger than the body actually sent. No authentication is involved. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: Prevent stale XSK buffer release on MPWQE refill retry
With AF_XDP on a striding RQ, mlx5e defers releasing XSK buffers until
an MPWQE is refilled. If XSK allocation then returns -ENOMEM,
actual_wq_head is not advanced and a later NAPI poll retries the same
WQE.
mlx5e_free_rx_mpwqe() leaves each released slot marked as releasable. On
retry it can therefore call xsk_buff_free() again through stale pointers
after the frames have returned to the XSK pool and been reallocated.
Set all skip_release_bitmap bits in the common error path of
mlx5e_xsk_alloc_rx_mpwqe(). This matches mlx5e_alloc_rx_mpwqe(). A
successful allocation already clears the bitmap after replacing every
buffer, so retries become idempotent without changing the success path.
Fault injection forced three consecutive failures for one selected MPWQE.
Both an early allocation failure and a partial 8-of-16-buffer unwind
released the original 16 XSK buffers only once. Each error left a full
bitmap, the following NAPI retry skipped the release, and a later
successful allocation cleared it. A 20-second AF_XDP zero-copy pressure
run exercised 1,575,262 buffer allocation failures without invalid
descriptors, WQE errors, or kernel warnings. |
| The Otter Blocks WordPress plugin before 3.2.8 does not enforce its block visibility conditions when a published post is rendered through the WordPress REST API, allowing unauthenticated users to read block content that the site owner restricted to specific roles, logged-in users, the post author, categories or tags, or (on the Pro tier) Stripe purchasers. |
| The MAS Videos WordPress plugin through 1.3.4 does not perform any capability or ownership check when handling its front-end video and playlist deletion requests, and the nonce it verifies is tied only to a static action rather than to the targeted object, allowing any authenticated user with a minimal role to permanently delete arbitrary posts, pages, attachments and other content belonging to other users. |
| The News Kit Addons For Elementor WordPress plugin through 1.4.7 does not perform capability or ownership checks before updating post metadata in one of its authenticated AJAX actions, allowing users with subscriber-level access and above to write arbitrary post meta, under attacker-chosen keys, to any post including those owned by other users. This can be used to overwrite protected core metadata and tamper with content created by higher-privileged users. |
| The Pixel Tag Manager for WooCommerce WordPress plugin before 2.2.3 does not perform a capability check in one of its AJAX actions, and exposes the nonce protecting it to any user able to access the admin dashboard, allowing users with a role as low as Contributor to overwrite the Pixel Tag Manager for WooCommerce WordPress plugin before 2.2.3's tracking configuration and have arbitrary JavaScript executed in the browsers of all visitors, including administrators. |
| The GeoDirectory WordPress plugin before 2.8.194 does not verify that a referenced attachment belongs to the listing being saved, allowing users with Subscriber-level access and above to modify the title, caption, moderation status and featured flag of images belonging to other users' listings, and to claim another user's image as their own featured image. |
| The GeoDirectory WordPress plugin before 2.8.194 does not validate a user-supplied image URL before using it as a local file path when saving a front-end listing, allowing users with Subscriber-level access and above to read files from outside the web root and to delete files on the server, limited to file names that carry an allowed media extension. A disclosed file is re-published at a public URL and its original is deleted as a side effect. |
| The GeoDirectory WordPress plugin before 2.8.194 does not perform status, ownership or password checks when loading listings for one of its unauthenticated AJAX handlers, allowing unauthenticated users to disclose the content of non-public (draft, pending and private) listings by supplying their IDs. |
| Heap-based buffer overflow in Windows Remote Desktop Protocol allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
drop_monitor: fix out-of-bounds write in reset_per_cpu_data()
In reset_per_cpu_data(), al is computed as:
al = sizeof(struct net_dm_alert_msg);
al += dm_hit_limit * sizeof(struct net_dm_drop_point);
al += sizeof(struct nlattr);
skb = genlmsg_new(al, GFP_KERNEL);
...
nla = nla_reserve(skb, NLA_UNSPEC, sizeof(struct net_dm_alert_msg));
...
msg = nla_data(nla);
memset(msg, 0, al);
Because al includes sizeof(struct nlattr) (the 4-byte attribute header),
genlmsg_new() allocates al bytes of tailroom starting at nla.
However, msg points to nla_data(nla), which is located
sizeof(struct nlattr) bytes past nla. Calling memset(msg, 0, al)
therefore writes al bytes starting from msg, exceeding the allocated
buffer by sizeof(struct nlattr) (4 bytes) and corrupting
skb_shared_info.
Fix this by letting al represent only the payload length, allocating
the skb with genlmsg_new(nla_total_size(al), GFP_KERNEL), and zeroing
al bytes from msg. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: alps: fix use-after-free on input2 registration failure
alps_input_configured() stores data->input2 before calling
input_register_device(). If registration fails, input_free_device()
frees the input device but data->input2 still points to the freed memory.
alps_input_configured() calls hid_hw_open() before allocating input2, so
URBs are already active and raw_event can fire during the failure window.
A U1_SP_ABSOLUTE_REPORT_ID report arriving then causes u1_raw_event()
to dereference the freed data->input2 -> use-after-free.
Fix by only storing input2 into drvdata after successful registration
and adding a NULL guard in the raw_event path. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fs/xattr: don't assume the inode is locked in path_unlink/path_rmdir
bpf_lsm_has_d_inode_locked() makes the verifier rewrite
bpf_[set|remove]_dentry_xattr() to the _locked variants, which assume
that the caller already holds the inode's i_rwsem. The path_unlink and
path_rmdir hooks are listed, but security_path_unlink() and
security_path_rmdir() run before vfs_unlink()/vfs_rmdir() take the
victim inode's i_rwsem, so a sleepable BPF LSM program attached to
either hook mutates the victim's xattrs without the lock held.
Drop the two path hooks from d_inode_locked_hooks so that the verifier
keeps the locking bpf_[set|remove]_dentry_xattr() variants, which take
the lock themselves. |
| In the Linux kernel, the following vulnerability has been resolved:
namespace: never expire a locked mount
Locked mounts are special. They protect the underlying files and
directories from being revealed. do_umount() refuses to unmount locked
mounts but shrink_submounts() doesn't.
A shrinkable mount can become locked once the owner of a user namespace
puts it beneath a locked mount with MOVE_MOUNT_BENEATH. The locked
property now moves to the mount at the bottom making it possible to
unmount the top mount.
So umount() of an unlocked ancestor now expires the bottom mount first
and the covered directory is revealed:
move_mount(c -> x/hidden, MOVE_MOUNT_BENEATH) = 0
the cover after the lock moved: umount2(x/hidden) = 0
the holder of the lock: umount2(x/hidden) = EINVAL
the root of the copy, busy: umount2(x) = EBUSY
reads x/hidden/secret: "covered-by-root"
So leave a locked mount alone as it dies together with its parent. A
plain umount() of an unlocked mount with a locked one below it is EBUSY
from now on. It's the same for any other locked child. A lazy umount
still takes the whole tree.
mark_mounts_for_expiry() never sees a locked mount. lock_mnt_tree()
leaves a mount on an expiry list alone and nothing else puts a locked
one on such a list. Add an assert for this. |
| The GeoDirectory WordPress plugin before 2.8.194 does not correctly verify ownership of listings submitted by logged-out users before allowing them to be edited, allowing unauthenticated attackers to modify, unpublish, attach images to, or reassign any guest-submitted listing when guest posting is enabled. |
| Use after free in Windows Kernel allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds read in Microsoft Office Excel allows an unauthorized attacker to disclose information over a network. |
