| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: Compare MACs in constant time
To prevent timing attacks, MAC comparisons need to be constant-time.
Replace the memcmp() with the correct function, crypto_memneq(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: rawsock: cancel tx_work before socket teardown
In rawsock_release(), cancel any pending tx_work and purge the write
queue before orphaning the socket. rawsock_tx_work runs on the system
workqueue and calls nfc_data_exchange which dereferences the NCI
device. Without synchronization, tx_work can race with socket and
device teardown when a process is killed (e.g. by SIGKILL), leading
to use-after-free or leaked references.
Set SEND_SHUTDOWN first so that if tx_work is already running it will
see the flag and skip transmitting, then use cancel_work_sync to wait
for any in-progress execution to finish, and finally purge any
remaining queued skbs. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ife: Fix metalist update behavior
Whenever an ife action replace changes the metalist, instead of
replacing the old data on the metalist, the current ife code is appending
the new metadata. Aside from being innapropriate behavior, this may lead
to an unbounded addition of metadata to the metalist which might cause an
out of bounds error when running the encode op:
[ 138.423369][ C1] ==================================================================
[ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255
[ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full)
[ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 138.425800][ C1] Call Trace:
[ 138.425804][ C1] <IRQ>
[ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122)
[ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1))
[ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597)
[ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1))
[ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2))
[ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171)
[ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57)
[ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114)
[ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3))
[ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45)
[ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879)
To solve this issue, fix the replace behavior by adding the metalist to
the ife rcu data structure. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing
struct bpf_plt contains a u64 target field. Currently, the BPF JIT
allocator requests an alignment of 4 bytes (sizeof(u32)) for the JIT
buffer.
Because the base address of the JIT buffer can be 4-byte aligned (e.g.,
ending in 0x4 or 0xc), the relative padding logic in build_plt() fails
to ensure that target lands on an 8-byte boundary.
This leads to two issues:
1. UBSAN reports misaligned-access warnings when dereferencing the
structure.
2. More critically, target is updated concurrently via WRITE_ONCE() in
bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64,
64-bit loads/stores are only guaranteed to be single-copy atomic if
they are 64-bit aligned. A misaligned target risks a torn read,
causing the JIT to jump to a corrupted address.
Fix this by increasing the allocation alignment requirement to 8 bytes
(sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base of
the JIT buffer to an 8-byte boundary, allowing the relative padding math
in build_plt() to correctly align the target field. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: xt_CT: drop pending enqueued packets on template removal
Templates refer to objects that can go away while packets are sitting in
nfqueue refer to:
- helper, this can be an issue on module removal.
- timeout policy, nfnetlink_cttimeout might remove it.
The use of templates with zone and event cache filter are safe, since
this just copies values.
Flush these enqueued packets in case the template rule gets removed. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: release flowtable after rcu grace period on error
Call synchronize_rcu() after unregistering the hooks from error path,
since a hook that already refers to this flowtable can be already
registered, exposing this flowtable to packet path and nfnetlink_hook
control plane.
This error path is rare, it should only happen by reaching the maximum
number hooks or by failing to set up to hardware offload, just call
synchronize_rcu().
There is a check for already used device hooks by different flowtable
that could result in EEXIST at this late stage. The hook parser can be
updated to perform this check earlier to this error path really becomes
rarely exercised.
Uncovered by KASAN reported as use-after-free from nfnetlink_hook path
when dumping hooks. |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: cfm: Fix race condition in peer_mep deletion
When a peer MEP is being deleted, cancel_delayed_work_sync() is called
on ccm_rx_dwork before freeing. However, br_cfm_frame_rx() runs in
softirq context under rcu_read_lock (without RTNL) and can re-schedule
ccm_rx_dwork via ccm_rx_timer_start() between cancel_delayed_work_sync()
returning and kfree_rcu() being called.
The following is a simple race scenario:
cpu0 cpu1
mep_delete_implementation()
cancel_delayed_work_sync(ccm_rx_dwork);
br_cfm_frame_rx()
// peer_mep still in hlist
if (peer_mep->ccm_defect)
ccm_rx_timer_start()
queue_delayed_work(ccm_rx_dwork)
hlist_del_rcu(&peer_mep->head);
kfree_rcu(peer_mep, rcu);
ccm_rx_work_expired()
// on freed peer_mep
To prevent this, cancel_delayed_work_sync() is replaced with
disable_delayed_work_sync() in both peer MEP deletion paths, so
that subsequent queue_delayed_work() calls from br_cfm_frame_rx()
are silently rejected.
The cc_peer_disable() helper retains cancel_delayed_work_sync()
because it is also used for the CC enable/disable toggle path where
the work must remain re-schedulable. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ
Currently the code attempts to accept requests regardless of the
command identifier which may cause multiple requests to be marked
as pending (FLAG_DEFER_SETUP) which can cause more than
L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer
causing an overflow.
The spec is quite clear that the same identifier shall not be used on
subsequent requests:
'Within each signaling channel a different Identifier shall be used
for each successive request or indication.'
https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d
So this attempts to check if there are any channels pending with the
same identifier and rejects if any are found. |
| A chained attack via SQL Expressions and a Grafana Enterprise plugin can lead to a remote arbitrary code execution impact (RCE). This is enabled by a feature in Grafana (OSS), so all users are always recommended to update to avoid future attack vectors going this path.
Only instances with the sqlExpressions feature toggle enabled are vulnerable.
Only instances in the following version ranges are affected:
- 11.6.0 (inclusive) to 11.6.14 (exclusive): 11.6.14 has the fix. 11.5 and below are not affected.
- 12.0.0 (inclusive) to 12.1.10 (exclusive): 12.1.10 has the fix. 12.0 did not receive an update, as it is end-of-life.
- 12.2.0 (inclusive) to 12.2.8 (exclusive): 12.2.8 has the fix.
- 12.3.0 (inclusive) to 12.3.6 (exclusive): 12.3.6 has the fix.
- 12.4.0 (inclusive) to 12.4.2 (exclusive): 12.4.2 has the fix. 13.0.0 and above also have the fix: no v13 release is affected. |
| MCP Ruby SDK is the official Ruby SDK for Model Context Protocol servers and clients. Prior to version 0.9.2, the Ruby SDK's streamable_http_transport.rb implementation contains a session hijacking vulnerability. An attacker who obtains a valid session ID can completely hijack the victim's Server-Sent Events (SSE) stream and intercept all real-time data. Version 0.9.2 contains a patch. |
| changedetection.io is a free open source web page change detection tool. Prior to 0.54.7, the `jq:` and `jqraw:` include filter expressions allow use of the jq `env` builtin, which reads all process environment variables and stores them as the watch snapshot. An authenticated user (or unauthenticated user when no password is set, the default) can leak sensitive environment variables including `SALTED_PASS`, `PLAYWRIGHT_DRIVER_URL`, `HTTP_PROXY`, and any secrets passed as env vars to the container. Version 0.54.7 patches the issue. |
| Tautulli is a Python based monitoring and tracking tool for Plex Media Server. Prior to version 2.17.0, the /newsletter/image/images API endpoint is vulnerable to path traversal, allowing unauthenticated attackers to read arbitrary files from the application server's filesystem. This issue has been patched in version 2.17.0. |
| Tautulli is a Python based monitoring and tracking tool for Plex Media Server. From version 1.3.10 to before version 2.17.0, an unsanitized JSONP callback parameter allows cross-origin script injection and API key theft. This issue has been patched in version 2.17.0. |
| NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. Prior to version 0.24.8, NanoMQ’s MQTT-over-WebSocket transport can be crashed by sending an MQTT packet with a deliberately large Remaining Length in the fixed header while providing a much shorter actual payload. The code path copies Remaining Length bytes without verifying that the current receive buffer contains that many bytes, resulting in an out-of-bounds read (ASAN reports OOB / crash). This is remotely triggerable over the WebSocket listener. This issue has been patched in version 0.24.8. |
| A vulnerability was detected in Tenda CH22 1.0.0.1. Impacted is the function formCreateFileName of the file /goform/createFileName. Performing a manipulation of the argument fileNameMit results in stack-based buffer overflow. The attack may be initiated remotely. The exploit is now public and may be used. |
| A flaw has been found in Tenda CH22 1.0.0.1. The affected element is the function FormWriteFacMac of the file /goform/WriteFacMac. Executing a manipulation of the argument mac can lead to command injection. The attack may be launched remotely. The exploit has been published and may be used. |
| A vulnerability was found in Tenda CH22 1.0.0.1. This affects the function fromAdvSetWan of the file /goform/AdvSetWan of the component Parameter Handler. The manipulation of the argument wanmode results in stack-based buffer overflow. The attack can be executed remotely. The exploit has been made public and could be used. |
| A vulnerability was determined in Tenda CH22 1.0.0.1. This impacts the function formQuickIndex of the file /goform/QuickIndex of the component Parameter Handler. This manipulation of the argument mit_linktype causes stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit has been publicly disclosed and may be utilized. |
| Stored cross-site scripting (XSS) in Checkmk 2.5.0 (beta) before 2.5.0b2 allows authenticated users with permission to create hosts or services to execute arbitrary JavaScript in the browsers of other users performing searches in the Unified Search feature. |
| Stored cross-site scripting (XSS) in Checkmk version 2.5.0 (beta) before 2.5.0b2 allows authenticated users with permission to create pending changes to inject malicious JavaScript into the Pending Changes sidebar, which will execute in the browsers of other users viewing the sidebar. |
