| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Squashfs: check metadata block offset is within range
Syzkaller reports a "general protection fault in squashfs_copy_data"
This is ultimately caused by a corrupted index look-up table, which
produces a negative metadata block offset.
This is subsequently passed to squashfs_copy_data (via
squashfs_read_metadata) where the negative offset causes an out of bounds
access.
The fix is to check that the offset is within range in
squashfs_read_metadata. This will trap this and other cases. |
| In the Linux kernel, the following vulnerability has been resolved:
pinctrl: cirrus: cs42l43: Fix double-put in cs42l43_pin_probe()
devm_add_action_or_reset() already invokes the action on failure,
so the explicit put causes a double-put. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: fix incorrect buffer cleanup in gve_tx_clean_pending_packets for QPL
In DQ-QPL mode, gve_tx_clean_pending_packets() incorrectly uses the RDA
buffer cleanup path. It iterates num_bufs times and attempts to unmap
entries in the dma array.
This leads to two issues:
1. The dma array shares storage with tx_qpl_buf_ids (union).
Interpreting buffer IDs as DMA addresses results in attempting to
unmap incorrect memory locations.
2. num_bufs in QPL mode (counting 2K chunks) can significantly exceed
the size of the dma array, causing out-of-bounds access warnings
(trace below is how we noticed this issue).
UBSAN: array-index-out-of-bounds in
drivers/net/ethernet/drivers/net/ethernet/google/gve/gve_tx_dqo.c:178:5 index 18 is out of
range for type 'dma_addr_t[18]' (aka 'unsigned long long[18]')
Workqueue: gve gve_service_task [gve]
Call Trace:
<TASK>
dump_stack_lvl+0x33/0xa0
__ubsan_handle_out_of_bounds+0xdc/0x110
gve_tx_stop_ring_dqo+0x182/0x200 [gve]
gve_close+0x1be/0x450 [gve]
gve_reset+0x99/0x120 [gve]
gve_service_task+0x61/0x100 [gve]
process_scheduled_works+0x1e9/0x380
Fix this by properly checking for QPL mode and delegating to
gve_free_tx_qpl_bufs() to reclaim the buffers. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: clone set on flush only
Syzbot with fault injection triggered a failing memory allocation with
GFP_KERNEL which results in a WARN splat:
iter.err
WARNING: net/netfilter/nf_tables_api.c:845 at nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845, CPU#0: syz.0.17/5992
Modules linked in:
CPU: 0 UID: 0 PID: 5992 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/12/2026
RIP: 0010:nft_map_deactivate+0x34e/0x3c0 net/netfilter/nf_tables_api.c:845
Code: 8b 05 86 5a 4e 09 48 3b 84 24 a0 00 00 00 75 62 48 8d 65 d8 5b 41 5c 41 5d 41 5e 41 5f 5d c3 cc cc cc cc cc e8 63 6d fa f7 90 <0f> 0b 90 43
+80 7c 35 00 00 0f 85 23 fe ff ff e9 26 fe ff ff 89 d9
RSP: 0018:ffffc900045af780 EFLAGS: 00010293
RAX: ffffffff89ca45bd RBX: 00000000fffffff4 RCX: ffff888028111e40
RDX: 0000000000000000 RSI: 00000000fffffff4 RDI: 0000000000000000
RBP: ffffc900045af870 R08: 0000000000400dc0 R09: 00000000ffffffff
R10: dffffc0000000000 R11: fffffbfff1d141db R12: ffffc900045af7e0
R13: 1ffff920008b5f24 R14: dffffc0000000000 R15: ffffc900045af920
FS: 000055557a6a5500(0000) GS:ffff888125496000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fb5ea271fc0 CR3: 000000003269e000 CR4: 00000000003526f0
Call Trace:
<TASK>
__nft_release_table+0xceb/0x11f0 net/netfilter/nf_tables_api.c:12115
nft_rcv_nl_event+0xc25/0xdb0 net/netfilter/nf_tables_api.c:12187
notifier_call_chain+0x19d/0x3a0 kernel/notifier.c:85
blocking_notifier_call_chain+0x6a/0x90 kernel/notifier.c:380
netlink_release+0x123b/0x1ad0 net/netlink/af_netlink.c:761
__sock_release net/socket.c:662 [inline]
sock_close+0xc3/0x240 net/socket.c:1455
Restrict set clone to the flush set command in the preparation phase.
Add NFT_ITER_UPDATE_CLONE and use it for this purpose, update the rbtree
and pipapo backends to only clone the set when this iteration type is
used.
As for the existing NFT_ITER_UPDATE type, update the pipapo backend to
use the existing set clone if available, otherwise use the existing set
representation. After this update, there is no need to clone a set that
is being deleted, this includes bound anonymous set.
An alternative approach to NFT_ITER_UPDATE_CLONE is to add a .clone
interface and call it from the flush set path. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ionic: Fix kernel stack leak in ionic_create_cq()
struct ionic_cq_resp resp {
__u32 cqid[2]; // offset 0 - PARTIALLY SET (see below)
__u8 udma_mask; // offset 8 - SET (resp.udma_mask = vcq->udma_mask)
__u8 rsvd[7]; // offset 9 - NEVER SET <- LEAK
};
rsvd[7]: 7 bytes of stack memory leaked unconditionally.
cqid[2]: The loop at line 1256 iterates over udma_idx but skips indices
where !(vcq->udma_mask & BIT(udma_idx)). The array has 2 entries but
udma_count could be 1, meaning cqid[1] might never be written via
ionic_create_cq_common(). If udma_mask only has bit 0 set, cqid[1] (4
bytes) is also leaked. So potentially 11 bytes leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, arm64: Force 8-byte alignment for JIT buffer to prevent atomic tearing
struct bpf_plt contains a u64 target field. Currently, the BPF JIT
allocator requests an alignment of 4 bytes (sizeof(u32)) for the JIT
buffer.
Because the base address of the JIT buffer can be 4-byte aligned (e.g.,
ending in 0x4 or 0xc), the relative padding logic in build_plt() fails
to ensure that target lands on an 8-byte boundary.
This leads to two issues:
1. UBSAN reports misaligned-access warnings when dereferencing the
structure.
2. More critically, target is updated concurrently via WRITE_ONCE() in
bpf_arch_text_poke() while the JIT'd code executes ldr. On arm64,
64-bit loads/stores are only guaranteed to be single-copy atomic if
they are 64-bit aligned. A misaligned target risks a torn read,
causing the JIT to jump to a corrupted address.
Fix this by increasing the allocation alignment requirement to 8 bytes
(sizeof(u64)) in bpf_jit_binary_pack_alloc(). This anchors the base of
the JIT buffer to an 8-byte boundary, allowing the relative padding math
in build_plt() to correctly align the target field. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: Add HID_CLAIMED_INPUT guards in raw_event callbacks missing them
In commit 2ff5baa9b527 ("HID: appleir: Fix potential NULL dereference at
raw event handle"), we handle the fact that raw event callbacks
can happen even for a HID device that has not been "claimed" causing a
crash if a broken device were attempted to be connected to the system.
Fix up the remaining in-tree HID drivers that forgot to add this same
check to resolve the same issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: fix nd_tbl NULL dereference when IPv6 is disabled
When booting with the 'ipv6.disable=1' parameter, the nd_tbl is never
initialized because inet6_init() exits before ndisc_init() is called
which initializes it. Then, if neigh_suppress is enabled and an ICMPv6
Neighbor Discovery packet reaches the bridge, br_do_suppress_nd() will
dereference ipv6_stub->nd_tbl which is NULL, passing it to
neigh_lookup(). This causes a kernel NULL pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000268
Oops: 0000 [#1] PREEMPT SMP NOPTI
[...]
RIP: 0010:neigh_lookup+0x16/0xe0
[...]
Call Trace:
<IRQ>
? neigh_lookup+0x16/0xe0
br_do_suppress_nd+0x160/0x290 [bridge]
br_handle_frame_finish+0x500/0x620 [bridge]
br_handle_frame+0x353/0x440 [bridge]
__netif_receive_skb_core.constprop.0+0x298/0x1110
__netif_receive_skb_one_core+0x3d/0xa0
process_backlog+0xa0/0x140
__napi_poll+0x2c/0x170
net_rx_action+0x2c4/0x3a0
handle_softirqs+0xd0/0x270
do_softirq+0x3f/0x60
Fix this by replacing IS_ENABLED(IPV6) call with ipv6_mod_enabled() in
the callers. This is in essence disabling NS/NA suppression when IPv6 is
disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix WARN_ON in tracing_buffers_mmap_close
When a process forks, the child process copies the parent's VMAs but the
user_mapped reference count is not incremented. As a result, when both the
parent and child processes exit, tracing_buffers_mmap_close() is called
twice. On the second call, user_mapped is already 0, causing the function to
return -ENODEV and triggering a WARN_ON.
Normally, this isn't an issue as the memory is mapped with VM_DONTCOPY set.
But this is only a hint, and the application can call
madvise(MADVISE_DOFORK) which resets the VM_DONTCOPY flag. When the
application does that, it can trigger this issue on fork.
Fix it by incrementing the user_mapped reference count without re-mapping
the pages in the VMA's open callback. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: ets: fix divide by zero in the offload path
Offloading ETS requires computing each class' WRR weight: this is done by
averaging over the sums of quanta as 'q_sum' and 'q_psum'. Using unsigned
int, the same integer size as the individual DRR quanta, can overflow and
even cause division by zero, like it happened in the following splat:
Oops: divide error: 0000 [#1] SMP PTI
CPU: 13 UID: 0 PID: 487 Comm: tc Tainted: G E 6.19.0-virtme #45 PREEMPT(full)
Tainted: [E]=UNSIGNED_MODULE
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets]
Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44
RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246
RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660
RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe
R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000
FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0
Call Trace:
<TASK>
ets_qdisc_change+0x870/0xf40 [sch_ets]
qdisc_create+0x12b/0x540
tc_modify_qdisc+0x6d7/0xbd0
rtnetlink_rcv_msg+0x168/0x6b0
netlink_rcv_skb+0x5c/0x110
netlink_unicast+0x1d6/0x2b0
netlink_sendmsg+0x22e/0x470
____sys_sendmsg+0x38a/0x3c0
___sys_sendmsg+0x99/0xe0
__sys_sendmsg+0x8a/0xf0
do_syscall_64+0x111/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f440b81c77e
Code: 4d 89 d8 e8 d4 bc 00 00 4c 8b 5d f8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 11 c9 c3 0f 1f 80 00 00 00 00 48 8b 45 10 0f 05 <c9> c3 83 e2 39 83 fa 08 75 e7 e8 13 ff ff ff 0f 1f 00 f3 0f 1e fa
RSP: 002b:00007fff951e4c10 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000481820 RCX: 00007f440b81c77e
RDX: 0000000000000000 RSI: 00007fff951e4cd0 RDI: 0000000000000003
RBP: 00007fff951e4c20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000202 R12: 00007fff951f4fa8
R13: 00000000699ddede R14: 00007f440bb01000 R15: 0000000000486980
</TASK>
Modules linked in: sch_ets(E) netdevsim(E)
---[ end trace 0000000000000000 ]---
RIP: 0010:ets_offload_change+0x11f/0x290 [sch_ets]
Code: e4 45 31 ff eb 03 41 89 c7 41 89 cb 89 ce 83 f9 0f 0f 87 b7 00 00 00 45 8b 08 31 c0 45 01 cc 45 85 c9 74 09 41 6b c4 64 31 d2 <41> f7 f2 89 c2 44 29 fa 45 89 df 41 83 fb 0f 0f 87 c7 00 00 00 44
RSP: 0018:ffffd0a180d77588 EFLAGS: 00010246
RAX: 00000000ffffff38 RBX: ffff8d3d482ca000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffd0a180d77660
RBP: ffffd0a180d77690 R08: ffff8d3d482ca2d8 R09: 00000000fffffffe
R10: 0000000000000000 R11: 0000000000000000 R12: 00000000fffffffe
R13: ffff8d3d472f2000 R14: 0000000000000003 R15: 0000000000000000
FS: 00007f440b6c2740(0000) GS:ffff8d3dc9803000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000003cdd2000 CR3: 0000000007b58002 CR4: 0000000000172ef0
Kernel panic - not syncing: Fatal exception
Kernel Offset: 0x30000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
---[ end Kernel panic - not syncing: Fatal exception ]---
Fix this using 64-bit integers for 'q_sum' and 'q_psum'. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_ife: Fix metalist update behavior
Whenever an ife action replace changes the metalist, instead of
replacing the old data on the metalist, the current ife code is appending
the new metadata. Aside from being innapropriate behavior, this may lead
to an unbounded addition of metadata to the metalist which might cause an
out of bounds error when running the encode op:
[ 138.423369][ C1] ==================================================================
[ 138.424317][ C1] BUG: KASAN: slab-out-of-bounds in ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.424906][ C1] Write of size 4 at addr ffff8880077f4ffe by task ife_out_out_bou/255
[ 138.425778][ C1] CPU: 1 UID: 0 PID: 255 Comm: ife_out_out_bou Not tainted 7.0.0-rc1-00169-gfbdfa8da05b6 #624 PREEMPT(full)
[ 138.425795][ C1] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
[ 138.425800][ C1] Call Trace:
[ 138.425804][ C1] <IRQ>
[ 138.425808][ C1] dump_stack_lvl (lib/dump_stack.c:122)
[ 138.425828][ C1] print_report (mm/kasan/report.c:379 mm/kasan/report.c:482)
[ 138.425839][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425844][ C1] ? __virt_addr_valid (./arch/x86/include/asm/preempt.h:95 (discriminator 1) ./include/linux/rcupdate.h:975 (discriminator 1) ./include/linux/mmzone.h:2207 (discriminator 1) arch/x86/mm/physaddr.c:54 (discriminator 1))
[ 138.425853][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425859][ C1] kasan_report (mm/kasan/report.c:221 mm/kasan/report.c:597)
[ 138.425868][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425878][ C1] kasan_check_range (mm/kasan/generic.c:186 (discriminator 1) mm/kasan/generic.c:200 (discriminator 1))
[ 138.425884][ C1] __asan_memset (mm/kasan/shadow.c:84 (discriminator 2))
[ 138.425889][ C1] ife_tlv_meta_encode (net/ife/ife.c:168)
[ 138.425893][ C1] ? ife_tlv_meta_encode (net/ife/ife.c:171)
[ 138.425898][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425903][ C1] ife_encode_meta_u16 (net/sched/act_ife.c:57)
[ 138.425910][ C1] ? __pfx_do_raw_spin_lock (kernel/locking/spinlock_debug.c:114)
[ 138.425916][ C1] ? __asan_memcpy (mm/kasan/shadow.c:105 (discriminator 3))
[ 138.425921][ C1] ? __pfx_ife_encode_meta_u16 (net/sched/act_ife.c:45)
[ 138.425927][ C1] ? srso_alias_return_thunk (arch/x86/lib/retpoline.S:221)
[ 138.425931][ C1] tcf_ife_act (net/sched/act_ife.c:847 net/sched/act_ife.c:879)
To solve this issue, fix the replace behavior by adding the metalist to
the ife rcu data structure. |
| In the Linux kernel, the following vulnerability has been resolved:
ice: change XDP RxQ frag_size from DMA write length to xdp.frame_sz
The only user of frag_size field in XDP RxQ info is
bpf_xdp_frags_increase_tail(). It clearly expects whole buff size instead
of DMA write size. Different assumptions in ice driver configuration lead
to negative tailroom.
This allows to trigger kernel panic, when using
XDP_ADJUST_TAIL_GROW_MULTI_BUFF xskxceiver test and changing packet size to
6912 and the requested offset to a huge value, e.g.
XSK_UMEM__MAX_FRAME_SIZE * 100.
Due to other quirks of the ZC configuration in ice, panic is not observed
in ZC mode, but tailroom growing still fails when it should not.
Use fill queue buffer truesize instead of DMA write size in XDP RxQ info.
Fix ZC mode too by using the new helper. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-fcloop: Check remoteport port_state before calling done callback
In nvme_fc_handle_ls_rqst_work, the lsrsp->done callback is only set when
remoteport->port_state is FC_OBJSTATE_ONLINE. Otherwise, the
nvme_fc_xmt_ls_rsp's LLDD call to lport->ops->xmt_ls_rsp is expected to
fail and the nvme-fc transport layer itself will directly call
nvme_fc_xmt_ls_rsp_free instead of relying on LLDD's done callback to free
the lsrsp resources.
Update the fcloop_t2h_xmt_ls_rsp routine to check remoteport->port_state.
If online, then lsrsp->done callback will free the lsrsp. Else, return
-ENODEV to signal the nvme-fc transport to handle freeing lsrsp. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: thp: deny THP for files on anonymous inodes
file_thp_enabled() incorrectly allows THP for files on anonymous inodes
(e.g. guest_memfd and secretmem). These files are created via
alloc_file_pseudo(), which does not call get_write_access() and leaves
inode->i_writecount at 0. Combined with S_ISREG(inode->i_mode) being
true, they appear as read-only regular files when
CONFIG_READ_ONLY_THP_FOR_FS is enabled, making them eligible for THP
collapse.
Anonymous inodes can never pass the inode_is_open_for_write() check
since their i_writecount is never incremented through the normal VFS
open path. The right thing to do is to exclude them from THP eligibility
altogether, since CONFIG_READ_ONLY_THP_FOR_FS was designed for real
filesystem files (e.g. shared libraries), not for pseudo-filesystem
inodes.
For guest_memfd, this allows khugepaged and MADV_COLLAPSE to create
large folios in the page cache via the collapse path, but the
guest_memfd fault handler does not support large folios. This triggers
WARN_ON_ONCE(folio_test_large(folio)) in kvm_gmem_fault_user_mapping().
For secretmem, collapse_file() tries to copy page contents through the
direct map, but secretmem pages are removed from the direct map. This
can result in a kernel crash:
BUG: unable to handle page fault for address: ffff88810284d000
RIP: 0010:memcpy_orig+0x16/0x130
Call Trace:
collapse_file
hpage_collapse_scan_file
madvise_collapse
Secretmem is not affected by the crash on upstream as the memory failure
recovery handles the failed copy gracefully, but it still triggers
confusing false memory failure reports:
Memory failure: 0x106d96f: recovery action for clean unevictable
LRU page: Recovered
Check IS_ANON_FILE(inode) in file_thp_enabled() to deny THP for all
anonymous inode files. |
| In the Linux kernel, the following vulnerability has been resolved:
blktrace: fix __this_cpu_read/write in preemptible context
tracing_record_cmdline() internally uses __this_cpu_read() and
__this_cpu_write() on the per-CPU variable trace_cmdline_save, and
trace_save_cmdline() explicitly asserts preemption is disabled via
lockdep_assert_preemption_disabled(). These operations are only safe
when preemption is off, as they were designed to be called from the
scheduler context (probe_wakeup_sched_switch() / probe_wakeup()).
__blk_add_trace() was calling tracing_record_cmdline(current) early in
the blk_tracer path, before ring buffer reservation, from process
context where preemption is fully enabled. This triggers the following
using blktests/blktrace/002:
blktrace/002 (blktrace ftrace corruption with sysfs trace) [failed]
runtime 0.367s ... 0.437s
something found in dmesg:
[ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33
[ 81.239580] null_blk: disk nullb1 created
[ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516
[ 81.362842] caller is tracing_record_cmdline+0x10/0x40
[ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full)
[ 81.362877] Tainted: [N]=TEST
[ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[ 81.362881] Call Trace:
[ 81.362884] <TASK>
[ 81.362886] dump_stack_lvl+0x8d/0xb0
...
(See '/mnt/sda/blktests/results/nodev/blktrace/002.dmesg' for the entire message)
[ 81.211018] run blktests blktrace/002 at 2026-02-25 22:24:33
[ 81.239580] null_blk: disk nullb1 created
[ 81.357294] BUG: using __this_cpu_read() in preemptible [00000000] code: dd/2516
[ 81.362842] caller is tracing_record_cmdline+0x10/0x40
[ 81.362872] CPU: 16 UID: 0 PID: 2516 Comm: dd Tainted: G N 7.0.0-rc1lblk+ #84 PREEMPT(full)
[ 81.362877] Tainted: [N]=TEST
[ 81.362878] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.17.0-0-gb52ca86e094d-prebuilt.qemu.org 04/01/2014
[ 81.362881] Call Trace:
[ 81.362884] <TASK>
[ 81.362886] dump_stack_lvl+0x8d/0xb0
[ 81.362895] check_preemption_disabled+0xce/0xe0
[ 81.362902] tracing_record_cmdline+0x10/0x40
[ 81.362923] __blk_add_trace+0x307/0x5d0
[ 81.362934] ? lock_acquire+0xe0/0x300
[ 81.362940] ? iov_iter_extract_pages+0x101/0xa30
[ 81.362959] blk_add_trace_bio+0x106/0x1e0
[ 81.362968] submit_bio_noacct_nocheck+0x24b/0x3a0
[ 81.362979] ? lockdep_init_map_type+0x58/0x260
[ 81.362988] submit_bio_wait+0x56/0x90
[ 81.363009] __blkdev_direct_IO_simple+0x16c/0x250
[ 81.363026] ? __pfx_submit_bio_wait_endio+0x10/0x10
[ 81.363038] ? rcu_read_lock_any_held+0x73/0xa0
[ 81.363051] blkdev_read_iter+0xc1/0x140
[ 81.363059] vfs_read+0x20b/0x330
[ 81.363083] ksys_read+0x67/0xe0
[ 81.363090] do_syscall_64+0xbf/0xf00
[ 81.363102] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 81.363106] RIP: 0033:0x7f281906029d
[ 81.363111] Code: 31 c0 e9 c6 fe ff ff 50 48 8d 3d 66 63 0a 00 e8 59 ff 01 00 66 0f 1f 84 00 00 00 00 00 80 3d 41 33 0e 00 00 74 17 31 c0 0f 05 <48> 3d 00 f0 ff ff 77 5b c3 66 2e 0f 1f 84 00 00 00 00 00 48 83 ec
[ 81.363113] RSP: 002b:00007ffca127dd48 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
[ 81.363120] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f281906029d
[ 81.363122] RDX: 0000000000001000 RSI: 0000559f8bfae000 RDI: 0000000000000000
[ 81.363123] RBP: 0000000000001000 R08: 0000002863a10a81 R09: 00007f281915f000
[ 81.363124] R10: 00007f2818f77b60 R11: 0000000000000246 R12: 0000559f8bfae000
[ 81.363126] R13: 0000000000000000 R14: 0000000000000000 R15: 000000000000000a
[ 81.363142] </TASK>
The same BUG fires from blk_add_trace_plug(), blk_add_trace_unplug(),
and blk_add_trace_rq() paths as well.
The purpose of tracin
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: Don't default to -EOPNOTSUPP in rsi_mac80211_config
This triggers a WARN_ON in ieee80211_hw_conf_init and isn't the expected
behavior from the driver - other drivers default to 0 too. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: rawsock: cancel tx_work before socket teardown
In rawsock_release(), cancel any pending tx_work and purge the write
queue before orphaning the socket. rawsock_tx_work runs on the system
workqueue and calls nfc_data_exchange which dereferences the NCI
device. Without synchronization, tx_work can race with socket and
device teardown when a process is killed (e.g. by SIGKILL), leading
to use-after-free or leaked references.
Set SEND_SHUTDOWN first so that if tx_work is already running it will
see the flag and skip transmitting, then use cancel_work_sync to wait
for any in-progress execution to finish, and finally purge any
remaining queued skbs. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/deadline: Fix missing ENQUEUE_REPLENISH during PI de-boosting
Running stress-ng --schedpolicy 0 on an RT kernel on a big machine
might lead to the following WARNINGs (edited).
sched: DL de-boosted task PID 22725: REPLENISH flag missing
WARNING: CPU: 93 PID: 0 at kernel/sched/deadline.c:239 dequeue_task_dl+0x15c/0x1f8
... (running_bw underflow)
Call trace:
dequeue_task_dl+0x15c/0x1f8 (P)
dequeue_task+0x80/0x168
deactivate_task+0x24/0x50
push_dl_task+0x264/0x2e0
dl_task_timer+0x1b0/0x228
__hrtimer_run_queues+0x188/0x378
hrtimer_interrupt+0xfc/0x260
...
The problem is that when a SCHED_DEADLINE task (lock holder) is
changed to a lower priority class via sched_setscheduler(), it may
fail to properly inherit the parameters of potential DEADLINE donors
if it didn't already inherit them in the past (shorter deadline than
donor's at that time). This might lead to bandwidth accounting
corruption, as enqueue_task_dl() won't recognize the lock holder as
boosted.
The scenario occurs when:
1. A DEADLINE task (donor) blocks on a PI mutex held by another
DEADLINE task (holder), but the holder doesn't inherit parameters
(e.g., it already has a shorter deadline)
2. sched_setscheduler() changes the holder from DEADLINE to a lower
class while still holding the mutex
3. The holder should now inherit DEADLINE parameters from the donor
and be enqueued with ENQUEUE_REPLENISH, but this doesn't happen
Fix the issue by introducing __setscheduler_dl_pi(), which detects when
a DEADLINE (proper or boosted) task gets setscheduled to a lower
priority class. In case, the function makes the task inherit DEADLINE
parameters of the donoer (pi_se) and sets ENQUEUE_REPLENISH flag to
ensure proper bandwidth accounting during the next enqueue operation. |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: dell-wmi-sysman: Don't hex dump plaintext password data
set_new_password() hex dumps the entire buffer, which contains plaintext
password data, including current and new passwords. Remove the hex dump
to avoid leaking credentials. |
| In the Linux kernel, the following vulnerability has been resolved:
i2c: i801: Revert "i2c: i801: replace acpi_lock with I2C bus lock"
This reverts commit f707d6b9e7c18f669adfdb443906d46cfbaaa0c1.
Under rare circumstances, multiple udev threads can collect i801 device
info on boot and walk i801_acpi_io_handler somewhat concurrently. The
first will note the area is reserved by acpi to prevent further touches.
This ultimately causes the area to be deregistered. The second will
enter i801_acpi_io_handler after the area is unregistered but before a
check can be made that the area is unregistered. i2c_lock_bus relies on
the now unregistered area containing lock_ops to lock the bus. The end
result is a kernel panic on boot with the following backtrace;
[ 14.971872] ioatdma 0000:09:00.2: enabling device (0100 -> 0102)
[ 14.971873] BUG: kernel NULL pointer dereference, address: 0000000000000000
[ 14.971880] #PF: supervisor read access in kernel mode
[ 14.971884] #PF: error_code(0x0000) - not-present page
[ 14.971887] PGD 0 P4D 0
[ 14.971894] Oops: 0000 [#1] PREEMPT SMP PTI
[ 14.971900] CPU: 5 PID: 956 Comm: systemd-udevd Not tainted 5.14.0-611.5.1.el9_7.x86_64 #1
[ 14.971905] Hardware name: XXXXXXXXXXXXXXXXXXXXXXX BIOS 1.20.10.SV91 01/30/2023
[ 14.971908] RIP: 0010:i801_acpi_io_handler+0x2d/0xb0 [i2c_i801]
[ 14.971929] Code: 00 00 49 8b 40 20 41 57 41 56 4d 8b b8 30 04 00 00 49 89 ce 41 55 41 89 d5 41 54 49 89 f4 be 02 00 00 00 55 4c 89 c5 53 89 fb <48> 8b 00 4c 89 c7 e8 18 61 54 e9 80 bd 80 04 00 00 00 75 09 4c 3b
[ 14.971933] RSP: 0018:ffffbaa841483838 EFLAGS: 00010282
[ 14.971938] RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff9685e01ba568
[ 14.971941] RDX: 0000000000000008 RSI: 0000000000000002 RDI: 0000000000000000
[ 14.971944] RBP: ffff9685ca22f028 R08: ffff9685ca22f028 R09: ffff9685ca22f028
[ 14.971948] R10: 000000000000000b R11: 0000000000000580 R12: 0000000000000580
[ 14.971951] R13: 0000000000000008 R14: ffff9685e01ba568 R15: ffff9685c222f000
[ 14.971954] FS: 00007f8287c0ab40(0000) GS:ffff96a47f940000(0000) knlGS:0000000000000000
[ 14.971959] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 14.971963] CR2: 0000000000000000 CR3: 0000000168090001 CR4: 00000000003706f0
[ 14.971966] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 14.971968] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 14.971972] Call Trace:
[ 14.971977] <TASK>
[ 14.971981] ? show_trace_log_lvl+0x1c4/0x2df
[ 14.971994] ? show_trace_log_lvl+0x1c4/0x2df
[ 14.972003] ? acpi_ev_address_space_dispatch+0x16e/0x3c0
[ 14.972014] ? __die_body.cold+0x8/0xd
[ 14.972021] ? page_fault_oops+0x132/0x170
[ 14.972028] ? exc_page_fault+0x61/0x150
[ 14.972036] ? asm_exc_page_fault+0x22/0x30
[ 14.972045] ? i801_acpi_io_handler+0x2d/0xb0 [i2c_i801]
[ 14.972061] acpi_ev_address_space_dispatch+0x16e/0x3c0
[ 14.972069] ? __pfx_i801_acpi_io_handler+0x10/0x10 [i2c_i801]
[ 14.972085] acpi_ex_access_region+0x5b/0xd0
[ 14.972093] acpi_ex_field_datum_io+0x73/0x2e0
[ 14.972100] acpi_ex_read_data_from_field+0x8e/0x230
[ 14.972106] acpi_ex_resolve_node_to_value+0x23d/0x310
[ 14.972114] acpi_ds_evaluate_name_path+0xad/0x110
[ 14.972121] acpi_ds_exec_end_op+0x321/0x510
[ 14.972127] acpi_ps_parse_loop+0xf7/0x680
[ 14.972136] acpi_ps_parse_aml+0x17a/0x3d0
[ 14.972143] acpi_ps_execute_method+0x137/0x270
[ 14.972150] acpi_ns_evaluate+0x1f4/0x2e0
[ 14.972158] acpi_evaluate_object+0x134/0x2f0
[ 14.972164] acpi_evaluate_integer+0x50/0xe0
[ 14.972173] ? vsnprintf+0x24b/0x570
[ 14.972181] acpi_ac_get_state.part.0+0x23/0x70
[ 14.972189] get_ac_property+0x4e/0x60
[ 14.972195] power_supply_show_property+0x90/0x1f0
[ 14.972205] add_prop_uevent+0x29/0x90
[ 14.972213] power_supply_uevent+0x109/0x1d0
[ 14.972222] dev_uevent+0x10e/0x2f0
[ 14.972228] uevent_show+0x8e/0x100
[ 14.972236] dev_attr_show+0x19
---truncated--- |
