| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging infrastructure, and corruption of charging network data reported to the backend. |
| The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers and enables session hijacking or shadowing, where the most recent connection displaces the legitimate charging station and receives backend commands intended for that station. This vulnerability may allow unauthorized users to authenticate as other users or enable
a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests. |
| The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access. |
| A flaw was found in libcap. A local unprivileged user can exploit a Time-of-check-to-time-of-use (TOCTOU) race condition in the `cap_set_file()` function. This allows an attacker with write access to a parent directory to redirect file capability updates to an attacker-controlled file. By doing so, capabilities can be injected into or stripped from unintended executables, leading to privilege escalation. |
| The WebSocket backend uses charging station identifiers to uniquely associate sessions but allows multiple endpoints to connect using the same session identifier. This implementation results in predictable session identifiers and enables session hijacking or shadowing, where the most recent connection displaces the legitimate charging station and receives backend commands intended for that station. This vulnerability may allow unauthorized users to authenticate as other users or enable a malicious actor to cause a denial-of-service condition by overwhelming the backend with valid session requests. |
| Unisys WebPerfect Image Suite versions 3.0.3960.22810 and 3.0.3960.22604 expose a deprecated .NET Remoting TCP channel that allows remote unauthenticated attackers to leak NTLMv2 machine-account hashes by supplying a Windows UNC path as a target file argument through object-unmarshalling techniques. Attackers can capture the leaked NTLMv2 hash and relay it to other hosts to achieve privilege escalation or lateral movement depending on network configuration and patch level. |
| A flaw was found in FFmpeg’s ALS audio decoder, where it does not properly check for memory allocation failures. This can cause the application to crash when processing certain malformed audio files. While it does not lead to data theft or system control, it can be used to disrupt services and cause a denial of service. |
| The WebSocket Application Programming Interface lacks restrictions on the number of authentication requests. This absence of rate limiting may allow an attacker to conduct denial-of-service attacks by suppressing or mis-routing legitimate charger telemetry, or conduct brute-force attacks to gain unauthorized access. |
| The Gravity Bookings Premium plugin for WordPress is vulnerable to SQL Injection in all versions up to, and including, 2.5.9 due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for unauthenticated attackers to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| A flaw was found in Hibernate. A remote attacker with low privileges could exploit a second-order SQL injection vulnerability by providing specially crafted, unsanitized non-alphanumeric characters in the ID column when the InlineIdsOrClauseBuilder is used. This could lead to sensitive information disclosure, such as reading system files, and allow for data manipulation or deletion within the application's database, resulting in an application level denial of service. |
| WebSocket endpoints lack proper authentication mechanisms, enabling attackers to perform unauthorized station impersonation and manipulate data sent to the backend. An unauthenticated attacker can connect to the OCPP WebSocket endpoint using a known or discovered charging station identifier, then issue or receive OCPP commands as a legitimate charger. Given that no authentication is required, this can lead to privilege escalation, unauthorized control of charging infrastructure, and corruption of charging network data reported to the backend. |
| The Ninja Tables – Easy Data Table Builder plugin for WordPress is vulnerable to unauthorized database table creation due to missing authorization checks on the `createFluentCartTable` function in all versions up to, and including, 5.2.6. This makes it possible for authenticated attackers, with Subscriber-level access and above, to create arbitrary Ninja Tables in the database which can lead to database pollution and resource exhaustion. |
| A flaw was found in the Undertow HTTP server core, which is used in WildFly, JBoss EAP, and other Java applications. The Undertow library fails to properly validate the Host header in incoming HTTP requests.As a result, requests containing malformed or malicious Host headers are processed without rejection, enabling attackers to poison caches, perform internal network scans, or hijack user sessions. |
| A flaw was found in Undertow where malformed client requests can trigger server-side stream resets without triggering abuse counters. This issue, referred to as the "MadeYouReset" attack, allows malicious clients to induce excessive server workload by repeatedly causing server-side stream aborts. While not a protocol bug, this highlights a common implementation weakness that can be exploited to cause a denial of service (DoS). |
| OpenMRS Core is an open source electronic medical record system platform. In versions 2.7.8 and earlier and versions 2.8.0 through 2.8.5, the `/openmrs/moduleResources/{moduleid}` endpoint is vulnerable to a path traversal attack. The ModuleResourcesServlet constructs a filesystem path from user-controlled input without performing path boundary validation — the getFile() method concatenates the user-supplied path into an absolute filesystem path without calling normalize() or checking that the result stays within the allowed module resources directory. Because this endpoint serves static resources required for rendering the login page, it is not protected by authentication filters, allowing unauthenticated exploitation.
An attacker can traverse directories and read arbitrary files from the server filesystem, including /etc/passwd and application configuration files containing database credentials. Successful exploitation requires the target deployment to run on Apache Tomcat versions prior to 8.5.31, where the ..; path parameter bypass is not mitigated by the container. Deployments on Tomcat 8.5.31 or later and Tomcat 9.0.10 or later are protected at the container level, though the underlying code defect remains. This issue has been fixed in versions after 2.7.8 (within the 2.7.x branch) and in version 2.8.6 and later. |
| CoreDNS is a DNS server written in Go. In versions prior to 1.14.3, the gRPC, QUIC, DoH, and DoH3 transport implementations incorrectly handle TSIG authentication. For gRPC and QUIC, the server checks whether the TSIG key name exists in the configuration but never calls dns.TsigVerify() to validate the HMAC. If the key name matches a configured key, the tsigStatus field remains nil and the tsig plugin treats the request as successfully authenticated regardless of the MAC value. For DoH and DoH3, the issue is more severe: the DoHWriter.TsigStatus() method unconditionally returns nil, and the server never inspects the TSIG record at all. Any request containing a TSIG record is treated as authenticated over DoH and DoH3, even if the key name is invalid and the MAC is arbitrary.
An unauthenticated network attacker can exploit this to bypass TSIG-protected functionality such as AXFR/IXFR zone transfers, dynamic DNS updates, or other TSIG-gated plugin behavior. The DoH and DoH3 variants have a lower exploitation bar because the attacker does not need to know a valid TSIG key name.
This issue has been fixed in version 1.14.3. As a workaround, disable gRPC, QUIC, DoH, and DoH3 listeners where TSIG authentication is required, or restrict network-level access to affected transport ports to trusted sources only. |
| Unisys WebPerfect Image Suite versions 3.0.3960.22810 and 3.0.3960.22604 expose an unauthenticated WCF SOAP endpoint on TCP port 1208 that accepts unsanitized file paths in the ReadLicense action's LFName parameter, allowing remote attackers to trigger SMB connections and leak NTLMv2 machine-account hashes. Attackers can submit crafted SOAP requests with UNC paths to force the server to initiate outbound SMB connections, exposing authentication credentials that may be relayed for privilege escalation or lateral movement within the network. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/zcrx: fix user_ref race between scrub and refill paths
The io_zcrx_put_niov_uref() function uses a non-atomic
check-then-decrement pattern (atomic_read followed by separate
atomic_dec) to manipulate user_refs. This is serialized against other
callers by rq_lock, but io_zcrx_scrub() modifies the same counter with
atomic_xchg() WITHOUT holding rq_lock.
On SMP systems, the following race exists:
CPU0 (refill, holds rq_lock) CPU1 (scrub, no rq_lock)
put_niov_uref:
atomic_read(uref) - 1
// window opens
atomic_xchg(uref, 0) - 1
return_niov_freelist(niov) [PUSH #1]
// window closes
atomic_dec(uref) - wraps to -1
returns true
return_niov(niov)
return_niov_freelist(niov) [PUSH #2: DOUBLE-FREE]
The same niov is pushed to the freelist twice, causing free_count to
exceed nr_iovs. Subsequent freelist pushes then perform an out-of-bounds
write (a u32 value) past the kvmalloc'd freelist array into the adjacent
slab object.
Fix this by replacing the non-atomic read-then-dec in
io_zcrx_put_niov_uref() with an atomic_try_cmpxchg loop that atomically
tests and decrements user_refs. This makes the operation safe against
concurrent atomic_xchg from scrub without requiring scrub to acquire
rq_lock.
[pavel: removed a warning and a comment] |
| In the Linux kernel, the following vulnerability has been resolved:
ACPI: processor: Update cpuidle driver check in __acpi_processor_start()
Commit 7a8c994cbb2d ("ACPI: processor: idle: Optimize ACPI idle
driver registration") moved the ACPI idle driver registration to
acpi_processor_driver_init() and acpi_processor_power_init() does
not register an idle driver any more.
Accordingly, the cpuidle driver check in __acpi_processor_start() needs
to be updated to avoid calling acpi_processor_power_init() without a
cpuidle driver, in which case the registration of the cpuidle device
in that function would lead to a NULL pointer dereference in
__cpuidle_register_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: mixer: oss: Add card disconnect checkpoints
ALSA OSS mixer layer calls the kcontrol ops rather individually, and
pending calls might be not always caught at disconnecting the device.
For avoiding the potential UAF scenarios, add sanity checks of the
card disconnection at each entry point of OSS mixer accesses. The
rwsem is taken just before that check, hence the rest context should
be covered by that properly. |
