| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A container privilege escalation flaw was found in certain Fuse images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container. |
| A container privilege escalation flaw was found in certain Multi-Cloud Object Gateway Core images. This issue stems from the /etc/passwd file being created with group-writable permissions during build time. In certain conditions, an attacker who can execute commands within an affected container, even as a non-root user, can leverage their membership in the root group to modify the /etc/passwd file. This could allow the attacker to add a new user with any arbitrary UID, including UID 0, leading to full root privileges within the container |
| A visibility control issue in the event template creation workflow allowed non-site-admin users to access private galaxies belonging to other organisations. The event template builder loaded all enabled galaxies without applying organisation or distribution-based access restrictions, potentially exposing private galaxy metadata such as galaxy type and description to users who should not have visibility.
The issue has been fixed by restricting galaxy queries for non-site-admin users to galaxies owned by the user’s organisation or galaxies with a non-private distribution setting. Site administrators retain visibility of all enabled galaxies. |
| Issue summary: An OpenSSL TLS 1.3 server may fail to negotiate the expected
preferred key exchange group when its key exchange group configuration includes
the default by using the 'DEFAULT' keyword.
Impact summary: A less preferred key exchange may be used even when a more
preferred group is supported by both client and server, if the group
was not included among the client's initial predicated keyshares.
This will sometimes be the case with the new hybrid post-quantum groups,
if the client chooses to defer their use until specifically requested by
the server.
If an OpenSSL TLS 1.3 server's configuration uses the 'DEFAULT' keyword to
interpolate the built-in default group list into its own configuration, perhaps
adding or removing specific elements, then an implementation defect causes the
'DEFAULT' list to lose its 'tuple' structure, and all server-supported groups
were treated as a single sufficiently secure 'tuple', with the server not
sending a Hello Retry Request (HRR) even when a group in a more preferred tuple
was mutually supported.
As a result, the client and server might fail to negotiate a mutually supported
post-quantum key agreement group, such as 'X25519MLKEM768', if the client's
configuration results in only 'classical' groups (such as 'X25519' being the
only ones in the client's initial keyshare prediction).
OpenSSL 3.5 and later support a new syntax for selecting the most preferred TLS
1.3 key agreement group on TLS servers. The old syntax had a single 'flat'
list of groups, and treated all the supported groups as sufficiently secure.
If any of the keyshares predicted by the client were supported by the server
the most preferred among these was selected, even if other groups supported by
the client, but not included in the list of predicted keyshares would have been
more preferred, if included.
The new syntax partitions the groups into distinct 'tuples' of roughly
equivalent security. Within each tuple the most preferred group included among
the client's predicted keyshares is chosen, but if the client supports a group
from a more preferred tuple, but did not predict any corresponding keyshares,
the server will ask the client to retry the ClientHello (by issuing a Hello
Retry Request or HRR) with the most preferred mutually supported group.
The above works as expected when the server's configuration uses the built-in
default group list, or explicitly defines its own list by directly defining the
various desired groups and group 'tuples'.
No OpenSSL FIPS modules are affected by this issue, the code in question lies
outside the FIPS boundary.
OpenSSL 3.6 and 3.5 are vulnerable to this issue.
OpenSSL 3.6 users should upgrade to OpenSSL 3.6.2 once it is released.
OpenSSL 3.5 users should upgrade to OpenSSL 3.5.6 once it is released.
OpenSSL 3.4, 3.3, 3.0, 1.0.2 and 1.1.1 are not affected by this issue. |
| Use after free in Ozone in Google Chrome prior to 149.0.7827.53 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: Critical) |
| In ExtremeCloud IQ – Site Engine (XIQ‑SE) before 26.2.10, a vulnerability in the NAC administration interface allows an authenticated NAC administrator to retrieve masked sensitive parameters from HTTP responses. Although credentials appear redacted in the user interface, the application returns the underlying credential values in the HTTP response, enabling an authorized administrator to recover stored secrets that may exceed their intended access.
We would like to thank the Lockheed Martin Red Team for responsibly reporting this issue and working with us through coordinated disclosure. |
| A vulnerability allowing a Backup Viewer to perform remote code execution (RCE) as the postgres user. |
| Use after free in Chrome for iOS in Google Chrome on iOS prior to 149.0.7827.53 allowed a remote attacker to execute arbitrary code via a crafted HTML page. (Chromium security severity: Critical) |
| The "tarfile" module would still apply normalization of AREGTYPE (\x00) blocks to DIRTYPE, even while processing a multi-block member such as GNUTYPE_LONGNAME or GNUTYPE_LONGLINK. This could result in a crafted tar archive being misinterpreted by the tarfile module compared to other implementations. |
| UDS Identity Config builds the Keycloak configuration image (realm, plugins, theme, truststore, JARs) consumed by UDS Core's Identity deployment. In versions 0.11.0 through 0.26.0, a logic error in the `client-kubernetes-secret` Keycloak client authenticator (shipped by `uds-identity-config` and consumed by UDS Core) causes the submitted `client_secret` to be overwritten with the mounted Kubernetes secret before comparison. An attacker who can reach the Keycloak token endpoint and knows a `client_id` using this authenticator can authenticate as that client with any `client_secret` value and obtain OAuth2 tokens scoped to the client's service account. In the case of the `uds-operator` client this token can be used to registry/modify other clients. Version 0.26.1 patches the issue. |
| A privileged Ignition user, intentionally or otherwise, imports an external file with a specially crafted payload, which executes embedded malicious code. |
| Mbed TLS before 3.6.6 and TF-PSA-Crypto before 1.1.0 misuse seeds in a Pseudo-Random Number Generator (PRNG). |
| An issue was discovered in Mbed TLS before 3.6.6 and 4.x before 4.1.0 and TF-PSA-Crypto before 1.1.0. There is a Predictable Seed in a Pseudo-Random Number Generator (PRNG). |
| An issue was discovered in Mbed TLS through 3.6.5 and TF-PSA-Crypto 1.0.0. A buffer overflow can occur in public key export for FFDH keys. |
| The Honeywell IQ4x building management controller, exposes its full web-based HMI without authentication in its factory-default configuration. With no user module configured, security is disabled by design and the system operates under a System Guest (level 100) context, granting read/write privileges to any party able to reach the HTTP interface. Authentication controls are only enforced after a web user is created via U.htm, which dynamically enables the user module. Because this function is accessible prior to authentication, a remote user can create a new account with administrative read/write permissions enabling the user module and imposing authentication under attacker-controlled credentials. This action can effectively lock legitimate operators out of local and web-based configuration and administration. |
| 7-Zip is a file archiver with a high compression ratio. Versions 9.18 through 26.00 contain a heap out-of-bounds read in 7-Zip Ar handler BSD SYMDEF parser. A 4-byte heap out-of-bounds read exists in the Unix ar archive parser in 7-Zip. When parsing a BSD-style __.SYMDEF symbol table, the ParseLibSymbols function reads a 32-bit namesSize field via Get32 at a position that can equal the buffer size, reading 4 bytes past the end of the heap allocation. This reads uninitialized heap data under the default allocator. Version 26.01 patches the issue. |
| Mbed TLS before 2.28.10 and 3.x before 3.6.3, on the client side, accepts servers that have trusted certificates for arbitrary hostnames unless the TLS client application calls mbedtls_ssl_set_hostname. |
| An issue was discovered in Mbed TLS 3.x before 3.6.6. An out-of-bounds read vulnerability in mbedtls_ccm_finish() in library/ccm.c allows attackers to obtain adjacent CCM context data via invocation of the multipart CCM API with an oversized tag_len parameter. This is caused by missing validation of the tag_len parameter against the size of the internal 16-byte authentication buffer. The issue affects the public multipart CCM API in Mbed TLS 3.x, where mbedtls_ccm_finish() can be invoked directly by applications. In Mbed TLS 4.x versions prior to the fix, the same missing validation exists in the internal implementation; however, the function is not exposed as part of the public API. Exploitation requires application-level invocation of the multipart CCM API. |
| Mbed TLS before 2.28.10 and 3.x before 3.6.3, in some cases of failed memory allocation or hardware errors, uses uninitialized stack memory to compose the TLS Finished message, potentially leading to authentication bypasses such as replays. |
| Arm Mbed TLS before 2.14.1, before 2.7.8, and before 2.1.17 allows a local unprivileged attacker to recover the plaintext of RSA decryption, which is used in RSA-without-(EC)DH(E) cipher suites. |
