| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
USB: serial: omninet: fix memory corruption with small endpoint
Make sure that the bulk-out buffers are at least as large as the
hardcoded transfer size to avoid user-controlled slab corruption should
a malicious device report a smaller endpoint max packet size than
expected. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: rsnd: Fix potential out-of-bounds access of component_dais[]
component_dais[RSND_MAX_COMPONENT] is initially zero-initialized
and later populated in rsnd_dai_of_node(). However, the existing boundary check:
if (i >= RSND_MAX_COMPONENT)
does not guarantee that the last valid element remains zero. As a result,
the loop can rely on component_dais[RSND_MAX_COMPONENT] being zero,
which may lead to an out-of-bounds access.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SVM: Fix page overflow in sev_dbg_crypt() for ENCRYPT path
In sev_dbg_crypt(), the per-iteration transfer length is bounded by
the source page offset (PAGE_SIZE - s_off) but not by the destination
page offset (PAGE_SIZE - d_off). When d_off > s_off, the encrypt
path (__sev_dbg_encrypt_user) performs a read-modify-write using a
single-page intermediate buffer (dst_tpage):
1. __sev_dbg_decrypt() expands the size to round_up(len + (d_off & 15), 16)
before issuing the PSP command. If len + (d_off & 15) > PAGE_SIZE,
the PSP writes beyond the end of the 4096-byte dst_tpage allocation.
2. The subsequent memcpy()/copy_from_user() into
page_address(dst_tpage) + (d_off & 15) of 'len' bytes overflows
by up to 15 bytes under the same condition.
Trigger example: s_off = 0, d_off = 1, debug.len = PAGE_SIZE -
the PSP is instructed to write round_up(4097, 16) = 4112 bytes to
a 4096-byte buffer.
Fix by also bounding len by (PAGE_SIZE - d_off), the same check that
sev_send_update_data() already performs for its single-page guest
region.
==================================================================
BUG: KASAN: slab-use-after-free in sev_dbg_crypt+0x993/0xd10 [kvm_amd]
Write of size 4095 at addr ff110062293bb009 by task sev_dbg_test/228214
CPU: 96 UID: 0 PID: 228214 Comm: sev_dbg_test Tainted: G U W 7.0.0-smp--5ce9b0c48211-dbg #156 PREEMPTLAZY
Tainted: [U]=USER, [W]=WARN
Hardware name: Google Astoria/astoria, BIOS 0.20250817.1-0 08/25/2025
Call Trace:
<TASK>
dump_stack_lvl+0x54/0x70
print_report+0xbc/0x260
kasan_report+0xa2/0xd0
kasan_check_range+0x25f/0x2c0
__asan_memcpy+0x40/0x70
sev_dbg_crypt+0x993/0xd10 [kvm_amd]
sev_mem_enc_ioctl+0x33c/0x450 [kvm_amd]
kvm_vm_ioctl+0x65d/0x6d0 [kvm]
__se_sys_ioctl+0xb2/0x100
do_syscall_64+0xe8/0x870
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
The buggy address belongs to the physical page:
page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x7fe72b6a0 pfn:0x62293bb
memcg:ff11000112827d82
flags: 0x1400000000000000(node=1|zone=1)
raw: 1400000000000000 0000000000000000 dead000000000122 0000000000000000
raw: 00000007fe72b6a0 0000000000000000 00000001ffffffff ff11000112827d82
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ff110062293bbf00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ff110062293bbf80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ff110062293bc000: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
^
ff110062293bc080: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
ff110062293bc100: fa fb fb fb fb fb fb fb fc fc fc fc fc fc fc fc
==================================================================
Disabling lock debugging due to kernel taint
[sean: add sample KASAN splat, Fixes, and stable@] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use
As per the GHCB spec, when using GHCB v2+ require the software scratch area
to reside in the GHCB's shared buffer. Note, things like Page State Change
(PSC) requests _rely_ on this behavior, as the guest can't provide a length
when making the request, i.e. the size of the guest payload is bounded by
the size of the shared buffer.
Failure to force usage of the GHCB, and a slew of other flaws, lets a
malicious SNP guest corrupt host kernel heap memory, and leak host heap
layout information.
setup_vmgexit_scratch() allocates a buffer via kvzalloc(exit_info_2),
where exit_info_2 is guest-controlled. With exit_info_2=24, this yields
a 24-byte allocation in kmalloc-cg-32 (32-byte slab objects). The buffer
holds an 8-byte psc_hdr followed by 8-byte psc_entry structs, so only
entries[0] and entries[1] are in-bounds.
snp_begin_psc() validates end_entry against VMGEXIT_PSC_MAX_COUNT (253)
but NOT against the actual buffer size:
idx_end = hdr->end_entry;
if (idx_end >= VMGEXIT_PSC_MAX_COUNT) { // checks 253, not buffer
snp_complete_psc(svm, ...);
return 1;
}
for (idx = idx_start; idx <= idx_end; idx++) {
entry_start = entries[idx]; // OOB when idx >= 2
The guest sets end_entry=10+, causing the host to iterate entries[2+]
which are OOB into adjacent slab objects. For each OOB entry:
- The host reads 8 bytes (OOB READ / info leak oracle)
- If the data passes PSC validation, __snp_complete_one_psc() writes
cur_page = 1 or 512 into the entry (OOB WRITE, sev.c:3806)
- If validation fails, the error response reveals whether adjacent
memory is zero vs non-zero (information disclosure to guest)
The guest controls allocation size (exit_info_2), entry range
(cur_entry/end_entry), and can fire unlimited VMGEXITs to repeatedly
hit different slab positions.
By exploiting the variety of bugs, a malicious SEV-SNP guest can:
- OOB read adjacent kmalloc-cg-32 objects (heap layout disclosure)
- OOB write cur_page bits into adjacent objects (heap corruption)
- Trigger use-after-free conditions across VMGEXITs
E.g. with KASAN enabled, a single insmod of the PoC guest module
produces 73 KASAN reports:
BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x126/0x890
Read of size 8 at addr ffff888219ffb5e0 by task qemu-system-x86/2199
BUG: KASAN: slab-out-of-bounds in snp_begin_psc+0x468/0x890
Write of size 8 at addr ffff888351566648 by task qemu-system-x86/2199
The buggy address belongs to the object at ffff888XXXXXXXXX
which belongs to the cache kmalloc-cg-32 of size 32
The buggy address is located N bytes to the right of
allocated 32-byte region [ffff888XXXXXXXXX, ffff888XXXXXXXXX)
Breakdown:
62 slab-out-of-bounds (reads + writes past allocation)
7 slab-use-after-free
4 use-after-free
All credit to Stan for the wonderful description and reproducer!
[sean: write changelog] |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Use krealloc_array() in dal_vector_reserve()
[Why & How]
dal_vector_reserve() computes the allocation size as
"capacity * vector->struct_size" using uint32_t arithmetic, which can
silently wrap to a small value on overflow. This would cause krealloc to
return a smaller buffer than expected, leading to heap overflows on
subsequent vector appends.
Replace krealloc() with krealloc_array() which performs an internal
overflow check and returns NULL on wrap, preventing the issue.
(cherry picked from commit 37668568641ccc4cc1dbca4923d0a16609dd5707) |
| An out-of-bounds write vulnerability in the Productivity Suite allows a
local attacker to trigger kernel memory corruption via a crafted IOCTL
request, potentially resulting in privilege escalation or system
instability. |
| An out-of-bounds write vulnerability in the Productivity Suite allows a
local attacker to trigger kernel memory corruption via a crafted IOCTL
request, potentially resulting in privilege escalation or system
instability. |
| Quicly is an IETF QUIC protocol implementation intended primarily for use within the H2O HTTP server. Prior to commit 8b178e6, Quicly is vulnerable to a Denial of Service attack through connection state corruption. In QUIC Invariants, the maximum length of a Connection ID is 255 bytes, while QUIC version 1 further restricts the maximum to 20 bytes. Quicly implements QUIC version 1 and therefore its CID buffers are limited to 20 bytes. However, to be able to respond to unknown versions of QUIC, its packet decoder accepts Connection IDs of up to 255 bytes. As its CID buffers are merely 20 bytes long, Quicly must reject QUIC version 1 packets with Connection IDs longer than that. The command line tool bundled with Quicly has had that check, however the library itself lacked such enforcement. As a consequence, when used by applications that lack their own enforcement, the connection state becoming inconsistent to buffer overrun. Fortunately, the overflow stops within the allocated chunk of memory, but nevertheless, the bug leads to assertion failures. This issue has been fixed by commit 8b178e6. |
| The Zephyr ADIN2111/ADIN1110 10BASE-T1S/T1L Ethernet driver (drivers/ethernet/eth_adin2111.c) reassembles received Ethernet frames in OPEN Alliance (OA) SPI mode by copying device-supplied 64-byte data chunks into a fixed static buffer ctx->buf of size CONFIG_ETH_ADIN2111_BUFFER_SIZE (default 1524 bytes). In eth_adin2111_oa_data_read(), each valid chunk was memcpy'd into ctx->buf[ctx->scur] and the write cursor scur advanced, with no check that scur + len stayed within the buffer. The number of chunks (up to 255, from the BUFSTS RCA field) and the per-chunk length are taken entirely from the frame data received off the wire; the cursor is only reset on a start-of-frame chunk. An attacker on the single-pair Ethernet segment can therefore send a frame whose reassembled size exceeds the configured buffer, causing the driver's RX offload thread to write attacker-controlled frame bytes past the end of the static buffer into adjacent driver/kernel memory (up to roughly 14.8 KB in the worst case). This is a remotely/adjacently reachable out-of-bounds write (CWE-787) that can corrupt memory and cause denial of service or potentially code execution. The defect was introduced when OA SPI support was added (commit 0ca8b0756b1) and shipped in releases v3.7.0 through v4.4.0. The fix adds a bounds check that drops the oversized frame and resets the cursor before the copy. |
| TDengine is an open source, time-series database optimized for Internet of Things devices. In 3.4.1.6 and earlier, source/libs/parser/src/parUtil.c trimString() checks space for only one byte before processing SQL string escape sequences \%, \_, or \x, allowing a one-byte out-of-bounds write to the stack buffer tmpTokenBuf that can cause denial of service and potentially remote code execution. This issue is fixed in version 3.4.1.14. |
| Premiere Pro is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Audition is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Audition is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Pillow is a Python imaging library. Prior to 12.3.0, Pillow public image coordinate APIs can trigger a native heap out-of-bounds write when given coordinates near the signed 32-bit integer limits in Image.paste(), Image.crop(), or Image.alpha_composite(). This issue is fixed in version 12.3.0. |
| Premiere Pro is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Audition is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Audition is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Audition is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Media Encoder is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| After Effects is affected by an out-of-bounds write vulnerability that could result in arbitrary code execution in the context of the current user. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
