| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs-schemes: protect memcg_path kfree() with damon_sysfs_lock
Patch series "mm/damon/sysfs-schemes: fix use-after-free for [memcg_]path".
Reads of 'memcg_path' and 'path' files in DAMON sysfs interface could race
with their writes, results in use-after-free. Fix those.
This patch (of 2):
damon_sysfs_scheme_filter->mmecg_path can be read and written by users,
via DAMON sysfs memcg_path file. It can also be indirectly read, for the
parameters {on,off}line committing to DAMON. The reads for parameters
committing are protected by damon_sysfs_lock to avoid the sysfs files
being destroyed while any of the parameters are being read. But the
user-driven direct reads and writes are not protected by any lock, while
the write is deallocating the memcg_path-pointing buffer. As a result,
the readers could read the already freed buffer (user-after-free). Note
that the user-reads don't race when the same open file is used by the
writer, due to kernfs's open file locking. Nonetheless, doing the reads
and writes with separate open files would be common. Fix it by protecting
both the user-direct reads and writes with damon_sysfs_lock. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: virtio_bt: clamp rx length before skb_put
virtbt_rx_work() calls skb_put(skb, len) where len comes directly
from virtqueue_get_buf() with no validation against the buffer we
posted to the device. The RX skb is allocated in virtbt_add_inbuf()
and exposed to virtio as exactly 1000 bytes via sg_init_one().
Checking len against skb_tailroom(skb) is not sufficient because
alloc_skb() can leave more tailroom than the 1000 bytes actually
handed to the device. A malicious or buggy backend can therefore
report used.len between 1001 and skb_tailroom(skb), causing skb_put()
to include uninitialized kernel heap bytes that were never written by
the device.
The same path also accepts len == 0, in which case skb_put(skb, 0)
leaves the skb empty but virtbt_rx_handle() still reads the pkt_type
byte from skb->data, consuming uninitialized memory.
Define VIRTBT_RX_BUF_SIZE once and reuse it in alloc_skb() and
sg_init_one(), and gate virtbt_rx_work() on that same constant so
the bound checked matches the buffer actually exposed to the device.
Reject used.len == 0 in the same gate so an empty completion can
no longer reach virtbt_rx_handle().
Use bt_dev_err_ratelimited() because the length value comes from an
untrusted backend that can otherwise flood the kernel log.
Same class of bug as commit c04db81cd028 ("net/9p: Fix buffer
overflow in USB transport layer"), which hardened the USB 9p
transport against unchecked device-reported length. |
| In the Linux kernel, the following vulnerability has been resolved:
isofs: validate block number from NFS file handle in isofs_export_iget
isofs_fh_to_dentry() and isofs_fh_to_parent() pass an attacker-
controlled block number (ifid->block or ifid->parent_block) from
the NFS file handle to isofs_export_iget(), which only rejects
block == 0 before calling isofs_iget() and ultimately sb_bread().
A crafted file handle with fh_len sufficient to pass the check
added by commit 0405d4b63d08 ("isofs: Prevent the use of too small
fid") can still drive the server to read any in-range block on the
backing device as if it were an iso_directory_record. That earlier
fix was assigned CVE-2025-37780.
sb_bread() on an out-of-range block returns NULL cleanly via the
EIO path, so there is no memory-safety violation. For in-range
reads of adjacent-partition data on the same block device, the
unrelated bytes end up in iso_inode_info fields that reach the NFS
client as dentry metadata. The deployment surface (isofs exported
over NFS from loop-mounted images) is narrow and requires an
authenticated NFS peer, but the malformed-file-handle class is
reportable as hardening next to the existing CVE-2025-37780 fix.
Reject block >= ISOFS_SB(sb)->s_nzones in isofs_export_iget() so
the check covers both isofs_fh_to_dentry() and isofs_fh_to_parent()
call sites with a single line. |
| A flaw was found in the X.Org X server. This vulnerability, an out-of-bounds read, affects the XKB (X Keyboard Extension) modifier map handling. An attacker with access to the X11 server can exploit this by sending a malformed request, which causes the server to read beyond its intended memory boundaries. This can lead to the exposure of sensitive information or cause the server to crash, resulting in a denial of service. |
| A flaw was found in the X.Org X server. This out-of-bounds read vulnerability in the XKB geometry processing, specifically within the `CheckSetGeom()` and `XkbAddGeomKeyAlias` functions, allows an attacker to read uninitialized or out-of-bounds memory. An attacker with a connection to the X11 server, either locally or remotely, can exploit this without user interaction. This could lead to the disclosure of memory contents or cause a denial of service by crashing the server. |
| A flaw was found in libsoup. When establishing HTTPS tunnels through a configured HTTP proxy, sensitive session cookies are transmitted in cleartext within the initial HTTP CONNECT request. A network-positioned attacker or a malicious HTTP proxy can intercept these cookies, leading to potential session hijacking or user impersonation. |
| The Independent Analytics plugin for WordPress is vulnerable to Server-Side Request Forgery in all versions up to, and including, 2.14.9. This is due to a public tracking route at /wp-json/iawp/search that accepts attacker-controlled referrer_url values when the signature matches, combined with a scheduled favicon fetcher that performs unrestricted cURL requests to stored domains. The signature validation is insufficient because the signature is embedded in publicly-accessible JavaScript and the salt is static per site, allowing attackers to extract valid signatures. The favicon downloader uses raw cURL functions without any SSRF protection mechanisms (no localhost blocking, no private network filtering, and does not use WordPress's wp_safe_remote_* functions). This makes it possible for unauthenticated attackers to inject malicious referrer domains into the database and trigger server-side requests to arbitrary hosts including internal services. |
| The FOX – Currency Switcher Professional for WooCommerce plugin for WordPress is vulnerable to Authorization Bypass Through User-Controlled Key in all versions up to and including 1.4.6. This is due to the `get_value()` function in `classes/fixed/fixed_user_role.php` trusting the attacker-controlled `$_REQUEST['wooc_order_user_roles']` parameter to determine the user's role context for role-based price resolution without any validation, allowing it to override the legitimate role data derived from the authenticated user's session object via `$user->roles`. This makes it possible for authenticated attackers, with Subscriber-level access and above, to impersonate higher-privileged roles — such as wholesale customer or administrator — and obtain discounted or otherwise restricted pricing that should not be available to their actual role. This vulnerability only has practical impact when the fixed user-role pricing feature is enabled and at least one product has a privileged-role price configured. |
| The Login No Captcha reCAPTCHA plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the `$_SERVER['PHP_SELF']` superglobal in all versions up to, and including, 1.8.0. This is due to the `authenticate()` function storing the unsanitized output of `basename($_SERVER['PHP_SELF'])` in the `login_nocaptcha_error` WordPress option when a login attempt is made from a non-standard login page (e.g., xmlrpc.php). The `admin_notices()` function then echoes this stored value directly into the admin dashboard HTML without escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts that execute when an administrator with a whitelisted IP address visits the WordPress dashboard within 30 seconds of the attack. |
| The Timetable and Event Schedule by MotoPress plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 2.4.16 via the action_get_event_data due to missing validation on a user controlled key. This makes it possible for authenticated attackers, with contributor-level access and above, to enumerate timeslot IDs and read the full WP_Post object — including post_content, post_excerpt, post_status, and post_author — of draft, pending, and private mp-event posts belonging to other users, along with their associated raw timeslot descriptions. |
| The Frontend Admin by DynamiApps plugin for WordPress is vulnerable to authorization bypass in all versions up to, and including, 3.29.2. This is due to the plugin not properly verifying that a user is authorized to perform an action. This makes it possible for authenticated attackers, with subscriber-level access and above, to overwrite an administrator's user_pass, user_email, first_name, last_name, and other profile fields by supplying an arbitrary ?user_id= value, enabling full administrator account takeover via direct password replacement or email-redirect password reset. Exploitation requires the targeted Edit-User form to have its 'Roles' configuration setting left empty; when a non-empty roles list is configured, load_data() sets the user ID to 'none' for users whose roles fall outside the allowed list, preventing administrators from being targeted through that form. |
| The Meta Field Block plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 1.5.1. This is due to the plugin allowing users to specify arbitrary object IDs and object types via block attributes without validating whether the authenticated user has permission to access the requested object's metadata. This makes it possible for authenticated attackers, with Contributor-level access and above, to read arbitrary user meta, post meta, and term meta data from any object in the database. On sites using plugins that store sensitive data in meta fields (e.g., WooCommerce billing/shipping information), this could lead to the exposure of Personally Identifiable Information (PII) including names, email addresses, phone numbers, and physical addresses. |
| The Crawlomatic Multipage Scraper Post Generator plugin for WordPress is vulnerable to Remote Code Execution in all versions up to, and including, 2.7.2 via the filter_content function. This is due to passing the attacker-supplied 'callback_raw' shortcode attribute directly into call_user_func() with no sanitization or allowlist validation, relying solely on an is_callable() check that permits dangerous PHP built-ins such as system, shell_exec, exec, passthru, and assert. This makes it possible for authenticated attackers, with author-level access and above, to execute code on the server. An identical sink exists for the 'callback' attribute, providing a second independent vector through the same shortcode. |
| The LiveSmart Video Chat Live Video Chat plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'livesmart_widget' shortcode in all versions up to, and including, 1.2 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Easy Digital Downloads plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 3.6.7. This is due to missing nonce verification in the `handle_oauth_redirect()` function, which is registered on the `admin_init` hook and processes Square OAuth tokens from a user-supplied GET parameter without any CSRF token validation. This makes it possible for unauthenticated attackers to overwrite the store's Square payment gateway credentials by tricking a logged-in administrator into clicking a crafted link, potentially resulting in payment account hijacking. |
| The SlimStat Analytics plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'User-Agent' header in all versions up to, and including, 5.4.11 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The show_complete_user_agent_tooltip setting must be explicitly enabled by an administrator (disabled by default) for the stored payload to be rendered and executed. |
| The User Registration & Membership – Free & Paid Memberships, Subscriptions, Content Restriction, User Profile, Custom User Registration & Login Builder plugin for WordPress is vulnerable to Insecure Direct Object Reference in all versions up to, and including, 5.1.5. This is due to missing ownership validation on a user-controlled attachment ID, allowing the plugin to store and subsequently delete arbitrary media attachments without verifying that the referenced attachment belongs to the requesting user. This makes it possible for authenticated attackers, with subscriber-level access and above, to permanently delete arbitrary media attachments uploaded by any other user, including administrators. |
| The PeachPay — Payments & Express Checkout for WooCommerce (supports Stripe, PayPal, Square, Authorize.net, NMI) plugin for WordPress is vulnerable to Cross-Site Request Forgery in all versions up to, and including, 1.120.46. This is due to missing or incorrect nonce validation on the peachpay_stripe_handle_admin_actions function. This makes it possible for unauthenticated attackers to permanently delete all stored Stripe credentials — including publishable keys, secret keys, webhook secrets, and Apple Pay configuration — from the WordPress database, disabling Stripe payment processing for the store via a forged request granted they can trick a site administrator into performing an action such as clicking on a link. |
| The GutenBee – Gutenberg Blocks plugin for WordPress is vulnerable to Arbitrary File Upload in all versions up to, and including, 2.20.1 via the gutenbee_file_and_ext_json function. This is due to a flawed strpos() substring check that only verifies whether the filename contains the string '.json' rather than confirming the filename ends with a .json extension, allowing double-extension filenames like shell.json.php to bypass validation. This makes it possible for authenticated attackers, with author-level access and above, to upload files that may be executable, which makes remote code execution possible. |
| The a3 Lazy Load plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 2.7.6 This is due to a regex bug in the _filter_videos() method that breaks HTML attribute quoting when processing crafted <video> elements, combined with unescaped output in the admin/views/form-data.php template. An authenticated attacker with Contributor-level access can insert a crafted <video> tag whose src attribute contains an embedded class=" substring that tricks the plugin's class-replacement regex into consuming an attribute-value closing quote. This shifts the HTML5 parser's quote boundary, promoting attacker-controlled text from inside a quoted attribute value into standalone event-handler attributes (autofocus, onfocus). The injected script executes in the browser of any user (including administrators) who views the post. |
