| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Input: lkkbd - disable pending work before freeing device
lkkbd_interrupt() schedules lk->tq via schedule_work(), and the work
handler lkkbd_reinit() dereferences the lkkbd structure and its
serio/input_dev fields.
lkkbd_disconnect() and error paths in lkkbd_connect() free the lkkbd
structure without preventing the reinit work from being queued again
until serio_close() returns. This can allow the work handler to run
after the structure has been freed, leading to a potential use-after-free.
Use disable_work_sync() instead of cancel_work_sync() to ensure the
reinit work cannot be re-queued, and call it both in lkkbd_disconnect()
and in lkkbd_connect() error paths after serio_open(). |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Fix potential UAF in xe_oa_add_config_ioctl()
In xe_oa_add_config_ioctl(), we accessed oa_config->id after dropping
metrics_lock. Since this lock protects the lifetime of oa_config, an
attacker could guess the id and call xe_oa_remove_config_ioctl() with
perfect timing, freeing oa_config before we dereference it, leading to
a potential use-after-free.
Fix this by caching the id in a local variable while holding the lock.
v2: (Matt A)
- Dropped mutex_unlock(&oa->metrics_lock) ordering change from
xe_oa_remove_config_ioctl()
(cherry picked from commit 28aeaed130e8e587fd1b73b6d66ca41ccc5a1a31) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: 8192cu: fix tid out of range in rtl92cu_tx_fill_desc()
TID getting from ieee80211_get_tid() might be out of range of array size
of sta_entry->tids[], so check TID is less than MAX_TID_COUNT. Othwerwise,
UBSAN warn:
UBSAN: array-index-out-of-bounds in drivers/net/wireless/realtek/rtlwifi/rtl8192cu/trx.c:514:30
index 10 is out of range for type 'rtl_tid_data [9]' |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/mediatek: fix use-after-free on probe deferral
The driver is dropping the references taken to the larb devices during
probe after successful lookup as well as on errors. This can
potentially lead to a use-after-free in case a larb device has not yet
been bound to its driver so that the iommu driver probe defers.
Fix this by keeping the references as expected while the iommu driver is
bound. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/oa: Limit num_syncs to prevent oversized allocations
The OA open parameters did not validate num_syncs, allowing
userspace to pass arbitrarily large values, potentially
leading to excessive allocations.
Add check to ensure that num_syncs does not exceed DRM_XE_MAX_SYNCS,
returning -EINVAL when the limit is violated.
v2: use XE_IOCTL_DBG() and drop duplicated check. (Ashutosh)
(cherry picked from commit e057b2d2b8d815df3858a87dffafa2af37e5945b) |
| An insufficient input validation vulnerability in NETGEAR Orbi devices'
DHCPv6 functionality allows network adjacent attackers authenticated
over WiFi or on LAN to execute OS command injections on the router.
DHCPv6 is not enabled by default. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: skip lock-range check on equal size to avoid size==0 underflow
When size equals the current i_size (including 0), the code used to call
check_lock_range(filp, i_size, size - 1, WRITE), which computes `size - 1`
and can underflow for size==0. Skip the equal case. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: vfs: fix race on m_flags in vfs_cache
ksmbd maintains delete-on-close and pending-delete state in
ksmbd_inode->m_flags. In vfs_cache.c this field is accessed under
inconsistent locking: some paths read and modify m_flags under
ci->m_lock while others do so without taking the lock at all.
Examples:
- ksmbd_query_inode_status() and __ksmbd_inode_close() use
ci->m_lock when checking or updating m_flags.
- ksmbd_inode_pending_delete(), ksmbd_set_inode_pending_delete(),
ksmbd_clear_inode_pending_delete() and ksmbd_fd_set_delete_on_close()
used to read and modify m_flags without ci->m_lock.
This creates a potential data race on m_flags when multiple threads
open, close and delete the same file concurrently. In the worst case
delete-on-close and pending-delete bits can be lost or observed in an
inconsistent state, leading to confusing delete semantics (files that
stay on disk after delete-on-close, or files that disappear while still
in use).
Fix it by:
- Making ksmbd_query_inode_status() look at m_flags under ci->m_lock
after dropping inode_hash_lock.
- Adding ci->m_lock protection to all helpers that read or modify
m_flags (ksmbd_inode_pending_delete(), ksmbd_set_inode_pending_delete(),
ksmbd_clear_inode_pending_delete(), ksmbd_fd_set_delete_on_close()).
- Keeping the existing ci->m_lock protection in __ksmbd_inode_close(),
and moving the actual unlink/xattr removal outside the lock.
This unifies the locking around m_flags and removes the data race while
preserving the existing delete-on-close behaviour. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: use rc_pageoff for memcpy byte offset
svc_rdma_copy_inline_range added rc_curpage (page index) to the page
base instead of the byte offset rc_pageoff. Use rc_pageoff so copies
land within the current page.
Found by ZeroPath (https://zeropath.com) |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fix use-after-free in ksmbd_tree_connect_put under concurrency
Under high concurrency, A tree-connection object (tcon) is freed on
a disconnect path while another path still holds a reference and later
executes *_put()/write on it. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: adjust read range correctly for non-block-aligned positions
iomap_adjust_read_range() assumes that the position and length passed in
are block-aligned. This is not always the case however, as shown in the
syzbot generated case for erofs. This causes too many bytes to be
skipped for uptodate blocks, which results in returning the incorrect
position and length to read in. If all the blocks are uptodate, this
underflows length and returns a position beyond the folio.
Fix the calculation to also take into account the block offset when
calculating how many bytes can be skipped for uptodate blocks. |
| In the Linux kernel, the following vulnerability has been resolved:
fuse: fix io-uring list corruption for terminated non-committed requests
When a request is terminated before it has been committed, the request
is not removed from the queue's list. This leaves a dangling list entry
that leads to list corruption and use-after-free issues.
Remove the request from the queue's list for terminated non-committed
requests. |
| A lack of data validation vulnerability in the HTML export feature in Quill in allows Cross-Site Scripting (XSS).
This issue affects Quill: 2.0.3. |
| A vulnerability affecting HPE Networking Instant On Access Points has been identified where a device processing a specially crafted packet could enter a non-responsive state, in some cases requiring a hard reset to re-establish services. A malicious actor could leverage this vulnerability to conduct a Denial-of-Service attack on a target network. |
| Authenticated command injection vulnerabilities exist in the web-based management interface of mobility conductors running AOS-8 operating system. Successful exploitation could allow an authenticated malicious actor to execute arbitrary commands as a privileged user on the underlying operating system. |
| Authenticated command injection vulnerabilities exist in the web-based management interface of mobility conductors running AOS-8 operating system. Successful exploitation could allow an authenticated malicious actor to execute arbitrary commands as a privileged user on the underlying operating system. |
| An improper input handling vulnerability exists in the web-based management interface of mobility conductors running either AOS-10 or AOS-8 operating systems. Successful exploitation could allow an authenticated malicious actor with valid credentials to trigger unintended behavior on the affected system. |
| Authenticated arbitrary file write vulnerability exists in the web-based management interface of mobility conductors running either AOS-10 or AOS-8 operating systems. Successful exploitation could allow an authenticated malicious actor to create or modify arbitrary files and execute arbitrary commands as a privileged user on the underlying operating system. |
| Arbitrary file upload vulnerability exists in the web-based management interface of mobility conductors running either AOS-10 or AOS-8 operating systems. Successful exploitation could allow an authenticated malicious actor to upload arbitrary files as a privilege user and execute arbitrary commands on the underlying operating system. |
| A command injection vulnerability in AOS-8 allows an authenticated privileged user to alter a package header to inject shell commands, potentially affecting the execution of internal operations. Successful exploit could allow an authenticated malicious actor to execute commands with the privileges of the impacted mechanism. |
