| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rsi: Fix memory corruption due to not set vif driver data size
The struct ieee80211_vif contains trailing space for vif driver data,
when struct ieee80211_vif is allocated, the total memory size that is
allocated is sizeof(struct ieee80211_vif) + size of vif driver data.
The size of vif driver data is set by each WiFi driver as needed.
The RSI911x driver does not set vif driver data size, no trailing space
for vif driver data is therefore allocated past struct ieee80211_vif .
The RSI911x driver does however use the vif driver data to store its
vif driver data structure "struct vif_priv". An access to vif->drv_priv
leads to access out of struct ieee80211_vif bounds and corruption of
some memory.
In case of the failure observed locally, rsi_mac80211_add_interface()
would write struct vif_priv *vif_info = (struct vif_priv *)vif->drv_priv;
vif_info->vap_id = vap_idx. This write corrupts struct fq_tin member
struct list_head new_flows . The flow = list_first_entry(head, struct
fq_flow, flowchain); in fq_tin_reset() then reports non-NULL bogus
address, which when accessed causes a crash.
The trigger is very simple, boot the machine with init=/bin/sh , mount
devtmpfs, sysfs, procfs, and then do "ip link set wlan0 up", "sleep 1",
"ip link set wlan0 down" and the crash occurs.
Fix this by setting the correct size of vif driver data, which is the
size of "struct vif_priv", so that memory is allocated and the driver
can store its driver data in it, instead of corrupting memory around
it. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Enforce that teql can only be used as root qdisc
Design intent of teql is that it is only supposed to be used as root qdisc.
We need to check for that constraint.
Although not important, I will describe the scenario that unearthed this
issue for the curious.
GangMin Kim <km.kim1503@gmail.com> managed to concot a scenario as follows:
ROOT qdisc 1:0 (QFQ)
├── class 1:1 (weight=15, lmax=16384) netem with delay 6.4s
└── class 1:2 (weight=1, lmax=1514) teql
GangMin sends a packet which is enqueued to 1:1 (netem).
Any invocation of dequeue by QFQ from this class will not return a packet
until after 6.4s. In the meantime, a second packet is sent and it lands on
1:2. teql's enqueue will return success and this will activate class 1:2.
Main issue is that teql only updates the parent visible qlen (sch->q.qlen)
at dequeue. Since QFQ will only call dequeue if peek succeeds (and teql's
peek always returns NULL), dequeue will never be called and thus the qlen
will remain as 0. With that in mind, when GangMin updates 1:2's lmax value,
the qfq_change_class calls qfq_deact_rm_from_agg. Since the child qdisc's
qlen was not incremented, qfq fails to deactivate the class, but still
frees its pointers from the aggregate. So when the first packet is
rescheduled after 6.4 seconds (netem's delay), a dangling pointer is
accessed causing GangMin's causing a UAF. |
| OpenClaw version 2026.2.22 prior to 2026.2.23 contain an arbitrary code execution vulnerability in shell-env that allows attackers to execute attacker-controlled binaries by exploiting trusted-prefix fallback logic for the $SHELL variable. An attacker can influence the $SHELL environment variable on systems with writable trusted-prefix directories such as /opt/homebrew/bin to execute arbitrary binaries in the OpenClaw process context. |
| In the Linux kernel, the following vulnerability has been resolved:
netrom: fix double-free in nr_route_frame()
In nr_route_frame(), old_skb is immediately freed without checking if
nr_neigh->ax25 pointer is NULL. Therefore, if nr_neigh->ax25 is NULL,
the caller function will free old_skb again, causing a double-free bug.
Therefore, to prevent this, we need to modify it to check whether
nr_neigh->ax25 is NULL before freeing old_skb. |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: limit BOND_MODE_8023AD to Ethernet devices
BOND_MODE_8023AD makes sense for ARPHRD_ETHER only.
syzbot reported:
BUG: KASAN: global-out-of-bounds in __hw_addr_create net/core/dev_addr_lists.c:63 [inline]
BUG: KASAN: global-out-of-bounds in __hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118
Read of size 16 at addr ffffffff8bf94040 by task syz.1.3580/19497
CPU: 1 UID: 0 PID: 19497 Comm: syz.1.3580 Tainted: G L syzkaller #0 PREEMPT(full)
Tainted: [L]=SOFTLOCKUP
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
Call Trace:
<TASK>
dump_stack_lvl+0xe8/0x150 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xca/0x240 mm/kasan/report.c:482
kasan_report+0x118/0x150 mm/kasan/report.c:595
check_region_inline mm/kasan/generic.c:-1 [inline]
kasan_check_range+0x2b0/0x2c0 mm/kasan/generic.c:200
__asan_memcpy+0x29/0x70 mm/kasan/shadow.c:105
__hw_addr_create net/core/dev_addr_lists.c:63 [inline]
__hw_addr_add_ex+0x25d/0x760 net/core/dev_addr_lists.c:118
__dev_mc_add net/core/dev_addr_lists.c:868 [inline]
dev_mc_add+0xa1/0x120 net/core/dev_addr_lists.c:886
bond_enslave+0x2b8b/0x3ac0 drivers/net/bonding/bond_main.c:2180
do_set_master+0x533/0x6d0 net/core/rtnetlink.c:2963
do_setlink+0xcf0/0x41c0 net/core/rtnetlink.c:3165
rtnl_changelink net/core/rtnetlink.c:3776 [inline]
__rtnl_newlink net/core/rtnetlink.c:3935 [inline]
rtnl_newlink+0x161c/0x1c90 net/core/rtnetlink.c:4072
rtnetlink_rcv_msg+0x7cf/0xb70 net/core/rtnetlink.c:6958
netlink_rcv_skb+0x208/0x470 net/netlink/af_netlink.c:2550
netlink_unicast_kernel net/netlink/af_netlink.c:1318 [inline]
netlink_unicast+0x82f/0x9e0 net/netlink/af_netlink.c:1344
netlink_sendmsg+0x805/0xb30 net/netlink/af_netlink.c:1894
sock_sendmsg_nosec net/socket.c:727 [inline]
__sock_sendmsg+0x21c/0x270 net/socket.c:742
____sys_sendmsg+0x505/0x820 net/socket.c:2592
___sys_sendmsg+0x21f/0x2a0 net/socket.c:2646
__sys_sendmsg+0x164/0x220 net/socket.c:2678
do_syscall_32_irqs_on arch/x86/entry/syscall_32.c:83 [inline]
__do_fast_syscall_32+0x1dc/0x560 arch/x86/entry/syscall_32.c:307
do_fast_syscall_32+0x34/0x80 arch/x86/entry/syscall_32.c:332
entry_SYSENTER_compat_after_hwframe+0x84/0x8e
</TASK>
The buggy address belongs to the variable:
lacpdu_mcast_addr+0x0/0x40 |
| Next.js is a React framework for building full-stack web applications. Starting in version 16.0.1 and prior to version 16.1.7, in `next dev`, cross-site protection for internal websocket endpoints could treat `Origin: null` as a bypass case even if `allowedDevOrigins` is configured, allowing privacy-sensitive/opaque contexts (for example sandboxed documents) to connect unexpectedly. If a dev server is reachable from attacker-controlled content, an attacker may be able to connect to the HMR websocket channel and interact with dev websocket traffic. This affects development mode only. Apps without a configured `allowedDevOrigins` still allow connections from any origin. The issue is fixed in version 16.1.7 by validating `Origin: null` through the same cross-site origin-allowance checks used for other origins. If upgrading is not immediately possible, do not expose `next dev` to untrusted networks and/or block websocket upgrades to `/_next/webpack-hmr` when `Origin` is `null` at the proxy. |
| Umbraco is an ASP.NET CMS. From 14.0.0 to before 16.5.1 and 17.2.2, A broken object-level authorization vulnerability exists in a backoffice API endpoint that allows authenticated users to assign domain-related data to content nodes without proper authorization checks. The issue is caused by insufficient authorization enforcement on the affected API endpoint, whereby via an API call, domains can be set on content nodes that the editor does not have permission to access (either via user group privileges or start nodes). This vulnerability is fixed in 16.5.1 and 17.2.2. |
| By manipulating the Signal Level Attenuation Characterization (SLAC)
protocol with spoofed measurements, an attacker can stage a
man-in-the-middle attack between an electric vehicle and chargers that
comply with the ISO 15118-2 part. This vulnerability may be exploitable
wirelessly, within close proximity, via electromagnetic induction. |
| OpenClaw versions prior to 2026.2.24 contain a local media root bypass vulnerability in sendAttachment and setGroupIcon message actions when sandboxRoot is unset. Attackers can hydrate media from local absolute paths to read arbitrary host files accessible by the runtime user. |
| Next.js is a React framework for building full-stack web applications. Starting in version 16.0.1 and prior to version 16.1.7, `origin: null` was treated as a "missing" origin during Server Action CSRF validation. As a result, requests from opaque contexts (such as sandboxed iframes) could bypass origin verification instead of being validated as cross-origin requests. An attacker could induce a victim browser to submit Server Actions from a sandboxed context, potentially executing state-changing actions with victim credentials (CSRF). This is fixed in version 16.1.7 by treating `'null'` as an explicit origin value and enforcing host/origin checks unless `'null'` is explicitly allowlisted in `experimental.serverActions.allowedOrigins`. If upgrading is not immediately possible, add CSRF tokens for sensitive Server Actions, prefer `SameSite=Strict` on sensitive auth cookies, and/or do not allow `'null'` in `serverActions.allowedOrigins` unless intentionally required and additionally protected. |
| OpenClaw versions prior to 2026.2.24 contain a sandbox bind validation vulnerability allowing attackers to bypass allowed-root and blocked-path checks via symlinked parent directories with non-existent leaf paths. Attackers can craft bind source paths that appear within allowed roots but resolve outside sandbox boundaries once missing leaf components are created, weakening bind-source isolation enforcement. |
| Next.js is a React framework for building full-stack web applications. Starting in version 16.0.1 and prior to version 16.1.7, a request containing the `next-resume: 1` header (corresponding with a PPR resume request) would buffer request bodies without consistently enforcing `maxPostponedStateSize` in certain setups. The previous mitigation protected minimal-mode deployments, but equivalent non-minimal deployments remained vulnerable to the same unbounded postponed resume-body buffering behavior. In applications using the App Router with Partial Prerendering capability enabled (via `experimental.ppr` or `cacheComponents`), an attacker could send oversized `next-resume` POST payloads that were buffered without consistent size enforcement in non-minimal deployments, causing excessive memory usage and potential denial of service. This is fixed in version 16.1.7 by enforcing size limits across all postponed-body buffering paths and erroring when limits are exceeded. If upgrading is not immediately possible, block requests containing the `next-resume` header, as this is never valid to be sent from an untrusted client. |
| DiceBear is an avatar library for designers and developers. Prior to version 9.4.0, the `ensureSize()` function in `@dicebear/converter` read the `width` and `height` attributes from the input SVG to determine the output canvas size for rasterization (PNG, JPEG, WebP, AVIF). An attacker who can supply a crafted SVG with extremely large dimensions (e.g. `width="999999999"`) could force the server to allocate excessive memory, leading to denial of service. This primarily affects server-side applications that pass untrusted or user-supplied SVGs to the converter's `toPng()`, `toJpeg()`, `toWebp()`, or `toAvif()` functions. Applications that only convert self-generated DiceBear avatars are not practically exploitable, but are still recommended to upgrade. This is fixed in version 9.4.0. The `ensureSize()` function no longer reads SVG attributes to determine output size. Instead, a new `size` option (default: 512, max: 2048) controls the output dimensions. Invalid values (NaN, negative, zero, Infinity) fall back to the default. If upgrading is not immediately possible, validate and sanitize the `width` and `height` attributes of any untrusted SVG input before passing it to the converter. |
| Umbraco is an ASP.NET CMS. From 16.2.0 to before 16.5.1 and 17.2.2, An authenticated backoffice user with access to Settings can inject malicious HTML into property type descriptions. Due to an overly permissive attributeNameCheck configuration (/.+/) in the UFM DOMPurify instance, event handler attributes such as onclick and onload, when used within Umbraco web components (umb-*, uui-*, ufm-*) were not filtered. This vulnerability is fixed in 16.5.1 and 17.2.2. |
| A compromised third party cloud server or man-in-the-middle attacker could send a malformed HTTP response and cause a crash in applications using the MongoDB C driver. |
| Netskope was notified about a potential gap in its Endpoint DLP Module for Netskope Client on Windows systems. The successful exploitation of the gap can potentially allow a privileged user to trigger an integer overflow within the DLL Injector, leading to a Blue-Screen-of-Death (BSOD). Successful exploitation would require the Endpoint DLP module to be enabled in the client configuration. A successful exploit can potentially result in a denial-of-service for the local machine. |
| A vulnerability was determined in Duende IdentityServer 4. The affected element is an unknown function of the file /connect/authorize of the component Token Renewal Endpoint. This manipulation of the argument id_token_hint causes improper authentication. It is possible to initiate the attack remotely. The attack is considered to have high complexity. The exploitability is described as difficult. The vendor was contacted early about this disclosure but did not respond in any way. |
| LDAP Account Manager (LAM) is a webfrontend for managing entries (e.g. users, groups, DHCP settings) stored in an LDAP directory. Prior to version 9.5, the PDF export component does not correctly validate uploaded file extensions. This way any file type (including .php files) can be uploaded. With GHSA-w7xq-vjr3-p9cf, an attacker can achieve remote code execution as the web server user. Version 9.5 fixes the issue. Although upgrading is recommended, a workaround would be to make /var/lib/ldap-account-manager/config read-only for the web-server user. |
| LDAP Account Manager (LAM) is a webfrontend for managing entries (e.g. users, groups, DHCP settings) stored in an LDAP directory. Prior to version 9.5, a local file inclusion was detected in the PDF export that allows users to include local PHP files and this way execute code. In combination with GHSA-88hf-2cjm-m9g8 this allows to execute arbitrary code. Users need to login to LAM to exploit this vulnerability. Version 9.5 fixes the issue. Although upgrading is recommended, a workaround would be to make /var/lib/ldap-account-manager/config read-only for the web-server user and delete the PDF profile files (making PDF exports impossible). |
| Next.js is a React framework for building full-stack web applications. Starting in version 10.0.0 and prior to version 16.1.7, the default Next.js image optimization disk cache (`/_next/image`) did not have a configurable upper bound, allowing unbounded cache growth. An attacker could generate many unique image-optimization variants and exhaust disk space, causing denial of service. This is fixed in version 16.1.7 by adding an LRU-backed disk cache with `images.maximumDiskCacheSize`, including eviction of least-recently-used entries when the limit is exceeded. Setting `maximumDiskCacheSize: 0` disables disk caching. If upgrading is not immediately possible, periodically clean `.next/cache/images` and/or reduce variant cardinality (e.g., tighten values for `images.localPatterns`, `images.remotePatterns`, and `images.qualities`). |
