| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ice: fix PTP Call Trace during PTP release
If a PF reset occurs when the PTP state is ICE_PTP_UNINIT, then
ice_ptp_rebuild() will update the state to ICE_PTP_ERROR. This will
result in the following PTP release call trace during driver unload:
kernel BUG at lib/list_debug.c:52!
ice_ptp_release+0x332/0x3c0 [ice]
ice_deinit_features.part.0+0x10e/0x120 [ice]
ice_remove+0x100/0x220 [ice]
This was observed when passing PF1 through to a VM. ice_ptp_init()
fails because ctrl_pf is NULL and sets the state to ICE_PTP_UNINIT.
Fix by detecting the ICE_PTP_UNINIT state in ice_ptp_rebuild() and
returning without error, preventing the invalid state transition to
ICE_PTP_ERROR. The only valid path to ICE_PTP_ERROR is from
ICE_PTP_RESETTING after a failed rebuild. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hip04: fix RX buffer leak on build_skb failure
When build_skb() fails in hip04_rx_poll(), the driver jumps to the
refill path without releasing the current RX buffer and its DMA mapping.
Installing a replacement buffer then overwrites the slot references and
leaks both resources.
Keep the current slot intact and return budget so NAPI retries the same
buffer. Also free a newly allocated RX fragment when dma_map_single()
fails.
This issue was found by an in-house static analysis tool. |
| A missing authentication vulnerability in OpenSignLabs opensignserver through 2.37.0 allows an unauthenticated remote attacker to read arbitrary stored documents via the fileupload Parse cloud function. The function mints MASTER_KEY-signed file access tokens for any caller-supplied URL without performing any session check, defeating the only access control protecting stored contract files. |
| A broken object-level authorization vulnerability in OpenSignLabs opensignserver through 2.37.0 allows an unauthenticated remote attacker to read complete contract records via the getDocument Parse cloud function. The function fetches documents using useMasterKey, bypassing the object ACL, and returns full records including sender and signer PII and a pre-signed document download URL whenever the document's IsEnableOTP flag is unset, which is the default configuration. |
| In the Linux kernel, the following vulnerability has been resolved:
geneve: require CAP_NET_ADMIN in the device netns for changelink
A tunnel changelink() operates on at most two netns, dev_net(dev) and
the sticky underlay netns geneve->net. They differ once the device is
created in or moved to a netns other than the one the request runs in.
The rtnl changelink path checks CAP_NET_ADMIN only against dev_net(dev),
so a caller privileged there but not in geneve->net can rewrite a geneve
device whose underlay lives in geneve->net.
geneve_changelink() applies the new configuration against geneve->net:
geneve_link_config() and the geneve_quiesce()/geneve_unquiesce() pair
reopen the underlay sockets in that netns (geneve_sock_add() uses
geneve->net), so the same reasoning as the tunnel changelink series
applies here.
Gate geneve_changelink() with rtnl_dev_link_net_capable(), at the top of
the op before any attribute is parsed, matching ipgre_changelink() and
the rest of the "require CAP_NET_ADMIN in the device netns for
changelink" series.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| An improper authorization vulnerability in Attendize through commit 9289acb allows an authenticated remote attacker to inject persistent mandatory survey questions into another organizer's events via the POST /event/{event_id}/question/create endpoint. The postCreateEventQuestion method loads the target event without the tenant-isolation scope, enabling cross-tenant writes; the injected question cannot be removed by the victim because the victim's account-scoped delete path cannot resolve a question owned by another tenant. |
| An authentication bypass vulnerability in OpenSignLabs opensignserver through 2.37.0 allows an unauthenticated remote attacker to mint MASTER_KEY-signed file access tokens for arbitrary stored files via the getsignedurl Parse cloud function. The function skips its isAuthenticated check whenever any docId parameter is supplied, even one corresponding to no real document, allowing the authentication gate to be bypassed by supplying an arbitrary string as docId. |
| In the Linux kernel, the following vulnerability has been resolved:
fscrypt: Add missing superblock check in find_or_insert_direct_key()
The legacy 'fscrypt_direct_keys' table caches master keys that are used
by v1 encryption policies that have FSCRYPT_POLICY_FLAG_DIRECT_KEY.
It's just a global table for all filesystems (since the keys can be
provided by the legacy process-subscribed keyrings mechanism, which
makes it difficult to reuse super_block::s_master_keys).
The entries in it ('struct fscrypt_direct_key') do contain a super_block
pointer, though, for passing to fscrypt_destroy_inline_crypt_key() when
the last inode that references the key is evicted.
However, when finding the fscrypt_direct_key for an inode, we weren't
actually comparing the super_block pointer. As a result, inodes with
different super_blocks could point to the same fscrypt_direct_key. That
could extend the lifetime of a fscrypt_direct_key beyond the
super_block it points to, causing a use-after-free later.
Fix this by creating distinct fscrypt_direct_key structs for distinct
super_block structs.
Note that this problem doesn't exist in the v2 policy equivalent
("per-mode keys"), since the data structures there are per super_block. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: preserve ACL_DONT_CACHE state in forget_cached_acl()
The ACL_DONT_CACHE state is meant to be a constant state for the inode
for filesystems that want to opt out of posix acl caching.
Commit facd61053cff1 ("fuse: fixes after adapting to new posix acl api")
used this facility to opt out of posix acl caching for fuse inodes with
fuse server that does not negotiate FUSE_POSIX_ACL (fc->posix_acl).
The commit also takes care to gate the forget_all_cached_acls() call in
fuse_set_acl() on fc->posix_acl because there is no need for it, but
there are other placed in fuse code which call forget_all_cached_acls()
unconditional to fc->posix_acl and those cause the loss of the
ACL_DONT_CACHE state.
This is not only a functional bug. Properly timed, a get_acl() from this
fuse filesystem can return a stale cached value, as was observed in tests,
because set_acl() does not invalidate the unintentional acl cache.
We could fix this in fuse, but it actually makes no sense for the vfs
helper forget_cached_acl() to invalidate the ACL_DONT_CACHE state, so
let it not do that to fix fuse and future users of ACL_DONT_CACHE. |
| A missing authorization vulnerability in OpenSignLabs opensignserver through 2.37.0 allows an unauthenticated remote attacker to irreversibly decline any in-flight document and forge the decline attribution to an arbitrary user via the declinedoc Parse cloud function. The function writes IsDeclined, DeclineReason, and a caller-supplied DeclineBy pointer without verifying the caller's identity, enabling workflow termination and evidentiary record falsification against any accessible document. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: refresh auth->authorizer_buf{,_len} after authorizer update
ceph_x_create_authorizer() caches au->buf->vec.iov_base and
au->buf->vec.iov_len in struct ceph_auth_handshake. These
cached values are then used by the messenger connect code when
sending the authorizer.
ceph_x_update_authorizer() can rebuild the authorizer when a newer
service ticket is available. If the rebuilt authorizer no longer
fits in the existing buffer, ceph_x_build_authorizer() drops its
reference to au->buf and allocates a new one. If this is the final
reference, ceph_buffer_put() frees the old ceph_buffer and its
vec.iov_base, but auth->authorizer_buf still points at that freed
memory.
A subsequent msgr1 reconnect can therefore queue the stale pointer
and trigger a KASAN slab-use-after-free in _copy_from_iter() while
tcp_sendmsg() copies the authorizer.
Refresh auth->authorizer_buf and auth->authorizer_buf_len after a
successful authorizer rebuild so the messenger sends the current
buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix multiplication overflow in decode_new_up_state_weight()
If a message of type CEPH_MSG_OSD_MAP contains a (maliciously) corrupted
osdmap, out-of-bounds memory accesses may occur in
decode_new_up_state_weight(). This happens because the bounds check for
the new_state part is based on calculating its length depending on a len
value read from the incoming message. This calculation may overflow
leading to an incorrect bounds check. Subsequently, out-of-bounds reads
may occur when decoding this part.
This patch switches the multiplication to use check_mul_overflow() to
abort processing the osdmap if an overflow occurred. Therefore,
osdmaps/messages containing large values for len that result in a
multiplication overflow are treated as invalid.
[ idryomov: rename new_state_len -> new_state_item_size, formatting ] |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: bound pg_{temp,upmap,upmap_items} length to CEPH_PG_MAX_SIZE
__decode_pg_temp() decodes an user-controlled length but only rejects
values large enough to overflow the allocation; it does not bound it to
CEPH_PG_MAX_SIZE. The helper backs both pg_temp and pg_upmap decoding, and
apply_upmap()/get_temp_osds() later copy the decoded list into the fixed-size
on-stack array struct ceph_osds.osds[CEPH_PG_MAX_SIZE]. A monitor that sends
an OSDMap with a pg_temp/pg_upmap entry longer than 32 thus causes a stack
out-of-bounds write.
An OSD set for a single PG can never exceed CEPH_PG_MAX_SIZE, so reject longer
entries at decode time. The bound is well below the old overflow threshold, so
it also covers the allocation-size overflow the previous check guarded against.
BUG: KASAN: stack-out-of-bounds in ceph_pg_to_up_acting_osds
Write of size 4 ... by task exploit
kasan_report (mm/kasan/report.c:595)
ceph_pg_to_up_acting_osds (net/ceph/osdmap.c:2617 net/ceph/osdmap.c:2833)
calc_target (net/ceph/osd_client.c:1638)
__submit_request (net/ceph/osd_client.c:2394)
ceph_osdc_start_request (net/ceph/osd_client.c:2490)
ceph_osdc_call (net/ceph/osd_client.c:5164)
rbd_dev_image_probe (drivers/block/rbd.c:6899)
do_rbd_add (drivers/block/rbd.c:7138)
...
kernel BUG at net/ceph/osdmap.c:2670!
[ idryomov: do the same in __decode_pg_upmap_items() ] |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/core: validate ranges in damon_set_regions()
DAMON core logic assumes zero length regions don't exist. However, a few
DAMON API callers including DAMON_SYSFS, DAMON_RECLAIM and DAMON_LRU_SORT
allow users to set empty monitoring target regions. This could result in
WARN_ONCE() on CONFIG_DAMON_DEBUG_SANITY enabled kernel, and
divide-by-zero from damon_merge_two_regions().
For example, the WANR_ONCE() can be triggered like below.
# grep DAMON_DEBUG_SANITY /boot/config-$(uname -r)
# CONFIG_DAMON_DEBUG_SANITY=y
# damo start
# cd /sys/kernel/mm/damon/admin/kdamonds/0
# echo 0 > contexts/0/targets/0/regions/0/start
# echo 0 > contexts/0/targets/0/regions/0/end
# echo commit > state
# dmesg
[....]
[ 73.705780] ------------[ cut here ]------------
[ 73.707552] start 0 >= end 0
[ 73.708452] WARNING: mm/damon/core.c:359 at damon_new_region+0x6e/0x80, CPU#1: kdamond.0/758
[...]
All DAMON API callers eventually use damon_set_regions() to setup the
regions. Add the validation logic in the function. |
| A flaw was found in GIMP's file format plugins, including those for PSD and PAA files. A remote attacker could exploit these vulnerabilities by tricking a user into opening a specially crafted image file. This could lead to unexpected application behavior or other potential security impacts without requiring further user interaction. |
| In the Linux kernel, the following vulnerability has been resolved:
userfaultfd: prevent registration of special VMAs
Vova Tokarev says:
userfaultfd allows registration on shadow stack VMAs. With userfaultfd
access, you can register on the shadow stack, discard a page ... and
inject a page with chosen return addresses via UFFDIO_COPY.
Update vma_can_userfault() to reject VM_SHADOW_STACK.
While on it, also reject VM_SPECIAL so that if a driver would implement
vm_uffd_ops, it wouldn't be possible to register special VMAs with
userfaultfd.
Since VM_SPECIAL includes VM_DONTEXPAND which is set but hugetlb, exclude
hugetlb VMAs from the check for VM_SPECIAL. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: do not try compression for data reloc inodes
[BUG]
There is a syzbot report that the check inside get_new_location()
triggered:
BTRFS info (device loop0): found 31 extents, stage: move data extents
BTRFS info (device loop0): leaf 8908800 gen 16 total ptrs 28 free space 1676 owner 18446744073709551607
item 0 key (256 INODE_ITEM 0) itemoff 3835 itemsize 160
inode generation 5 transid 0 size 0 nbytes 0
block group 0 mode 40755 links 1 uid 0 gid 0
rdev 0 sequence 0 flags 0x0
atime 1669132761.0
ctime 1669132761.0
mtime 1669132761.0
otime 0.0
item 1 key (256 INODE_REF 256) itemoff 3823 itemsize 12
index 0 name_len 2
item 2 key (258 INODE_ITEM 0) itemoff 3663 itemsize 160
inode generation 1 transid 16 size 733184 nbytes 106496
block group 0 mode 100600 links 0 uid 0 gid 0
rdev 0 sequence 24 flags 0x18
item 3 key (258 EXTENT_DATA 0) itemoff 3595 itemsize 68
generation 16 type 0
inline extent data size 47 ram_bytes 4096 compression 1
[...]
item 27 key (18446744073709551611 ORPHAN_ITEM 258) itemoff 2376 itemsize 0
BTRFS error (device loop0): unexpected non-zero offset in file extent item for data reloc inode 258 key offset 0 offset 9277520992061368337
------------[ cut here ]------------
btrfs_abort_should_print_stack(__error)
[CAUSE]
The above dump tree shows the first file extent item is inlined, which
should make no sense for data reloc inodes, as such inodes just
represent where the data extents are in the relocation destination chunk.
However the relocation path preallocates space for each block,
then dirties them, cluster by cluster.
It's possible to have a single block at the beginning of the block
group, and no other block in the same cluster.
So relocation will preallocate a file extent for that block and dirty
the first block. Then memory pressure forces the data reloc inode to be
written back, before any other blocks are dirtied/allocated.
Finally commit 3eaf5f082c4c ("btrfs: extract inlined creation into a dedicated
delalloc helper") changed the sequence of delalloc. Before that commit we
always tried NOCOW first, so that dirtied block would be written back into
the preallocated space, and appear as a regular extent.
But with that commit, we always try inline first, and since compression
is forced, we try compressing the first block, and then inline the
compressed data, resulting in the above inlined file extent in the data
reloc tree.
Then the check in get_new_location() will check the file offset, without
checking if the file extent is inlined or not, resulting in the above
failure.
[FIX]
Do not allow compression for data reloc inodes.
Since data reloc inode sizes are always block aligned, as long as we do
not compress, @data_len will always be at least one block, and
that will cause can_cow_file_range_inline() to return false, thus no
inlined extent will be created. |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix stale skb->sk reference on subflow close
The backlog list is updated by mptcp_data_ready() under
mptcp_data_lock(). The cleanup of backlog references to a closing
subflow, however, was performed in mptcp_close_ssk(), before
__mptcp_close_ssk() acquires the ssk lock, and while holding neither
the ssk lock nor mptcp_data_lock().
Because that traversal ran without mptcp_data_lock(), concurrent softirq
RX processing on another CPU (subflow_data_ready() -> mptcp_data_ready()
-> __mptcp_add_backlog(), under mptcp_data_lock()) could add a backlog
entry referencing the ssk while the cleanup loop was in progress. Such
an entry could be missed by the cleanup, or the concurrent list update
could corrupt the traversal, leaving skb->sk pointing at the ssk after
it is freed.
A later mptcp_backlog_purge() then dereferences the stale pointer,
triggering a warning in inet_sock_destruct() (ssk->sk_rmem_alloc != 0)
followed by a use-after-free in mptcp_backlog_purge().
Fix this by moving the backlog cleanup into __mptcp_close_ssk(), after
subflow->closing is set to 1 and while the ssk lock is still held,
serialized under mptcp_data_lock(). The cleanup runs only on the push
path (MPTCP_CF_PUSH), where backlog references accumulate; on other
teardown paths the caller already handles cleanup.
With subflow->closing set and mptcp_data_lock() held across the purge,
any concurrent mptcp_data_ready() either completes its enqueue before
the purge runs and is caught, or observes closing=1 and bails out. Once
mptcp_data_unlock() is reached, no new skb referencing the ssk can be
enqueued, so the cleanup is exhaustive.
Remove the unprotected traversal from mptcp_close_ssk() entirely. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix mmiotrace possible NULL dereferencing of hiter->dev
If the mmio_pipe_open() fails to find a PCI device, the hiter->dev
will be assigned to NULL. The mmiotrace read() function dereferences the
hiter->dev if hiter exists.
Change the test of the read to not only check hiter being NULL, but also
the hiter->dev before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Delay module ref count for "enable_event" trigger
Triggers are now delayed from freeing, but can still be triggered until
after the RCU grace period has ended. The freeing of the enable_event data
is put into the private_data_free() callback, but the put of the module
refcount is done immediately.
It is possible that if a module is removed that has an event that would
enable (or disable) it is still active, it can read the data of the module
after it is removed causing a use-after-free bug.
Move the trace_event_put_ref() that releases the module into the delayed
callback so that the module can not be removed until any reference to its
events are finished. |
