| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| SQL injection in Solicitante::resetaSenha() in esiclivre/esiclivre v0.2.2 and earlier allows unauthenticated remote attackers to gain unauthorized access to sensitive information via the cpfcnpj parameter in /reset/index.php |
| When the ngx_mail_auth_http_module module is enabled on NGINX Plus or NGINX Open Source, undisclosed requests can cause worker processes to terminate. This issue may occur when (1) CRAM-MD5 or APOP authentication is enabled, and (2) the authentication server permits retry by returning the Auth-Wait response header. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Incorrect Authorization (CWE-863) vulnerability in Apache Artemis, Apache ActiveMQ Artemis exists when an application using the OpenWire protocol attempts to create a non-durable JMS topic subscription on an address that doesn't exist with an authenticated user which has the "createDurableQueue" permission but does not have the "createAddress" permission and address auto-creation is disabled. In this circumstance, a temporary address will be created whereas the attempt to create the non-durable subscription should instead fail since the user is not authorized to create the corresponding address. When the OpenWire connection is closed the address is removed.
This issue affects Apache Artemis: from 2.50.0 through 2.52.0; Apache ActiveMQ Artemis: from 2.0.0 through 2.44.0.
Users are recommended to upgrade to version 2.53.0, which fixes the issue. |
| NGINX Open Source and NGINX Plus have a vulnerability in the ngx_http_dav_module module that might allow an attacker to trigger a buffer overflow to the NGINX worker process; this vulnerability may result in termination of the NGINX worker process or modification of source or destination file names outside the document root. This issue affects NGINX Open Source and NGINX Plus when the configuration file uses DAV module MOVE or COPY methods, prefix location (nonregular expression location configuration), and alias directives. The integrity impact is constrained because the NGINX worker process user has low privileges and does not have access to the entire system. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| The 32-bit implementation of NGINX Open Source has a vulnerability in the ngx_http_mp4_module module, which might allow an attacker to over-read or over-write NGINX worker memory resulting in its termination, using a specially crafted MP4 file. The issue only affects 32-bit NGINX Open Source if it is built with the ngx_http_mp4_module module and the mp4 directive is used in the configuration file. Additionally, the attack is possible only if an attacker can trigger the processing of a specially crafted MP4 file with the ngx_http_mp4_module module.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_mail_smtp_module module due to the improper handling of CRLF sequences in DNS responses. This allows an attacker-controlled DNS server to inject arbitrary headers into SMTP upstream requests, leading to potential request manipulation. Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Connect-CMS is a content management system. In versions on the 1.x series up to and including 1.41.0 and versions on the 2.x series up to and including 2.41.0, an improper authorization issue in the page content retrieval feature may allow retrieval of non-public information. Versions 1.41.1 and 2.41.1 contain a patch. |
| Active Support is a toolkit of support libraries and Ruby core extensions extracted from the Rails framework. `NumberToDelimitedConverter` uses a lookahead-based regular expression with `gsub!` to insert thousands delimiters. Prior to versions 8.1.2.1, 8.0.4.1, and 7.2.3.1, the interaction between the repeated lookahead group and `gsub!` can produce quadratic time complexity on long digit strings. Versions 8.1.2.1, 8.0.4.1, and 7.2.3.1 contain a patch. |
| Active Storage allows users to attach cloud and local files in Rails applications. Prior to versions 8.1.2.1, 8.0.4.1, and 7.2.3.1, `DirectUploadsController` accepts arbitrary metadata from the client and persists it on the blob. Because internal flags like `identified` and `analyzed` are stored in the same metadata hash, a direct-upload client can set these flags to skip MIME detection and analysis. This allows an attacker to upload arbitrary content while claiming a safe `content_type`, bypassing any validations that rely on Active Storage's automatic content type identification. Versions 8.1.2.1, 8.0.4.1, and 7.2.3.1 contain a patch. |
| Active Storage allows users to attach cloud and local files in Rails applications. Prior to versions 8.1.2.1, 8.0.4.1, and 7.2.3.1, Active Storage's `DiskService#delete_prefixed` passes blob keys directly to `Dir.glob` without escaping glob metacharacters. If a blob key contains attacker-controlled input or custom-generated keys with glob metacharacters, it may be possible to delete unintended files from the storage directory. Versions 8.1.2.1, 8.0.4.1, and 7.2.3.1 contain a patch. |
| Tekton Pipelines project provides k8s-style resources for declaring CI/CD-style pipelines. Starting in version 1.0.0 and prior to versions 1.0.1, 1.3.3, 1.6.1, 1.9.2, and 1.10.2, the Tekton Pipelines git resolver is vulnerable to path traversal via the `pathInRepo` parameter. A tenant with permission to create `ResolutionRequests` (e.g. by creating `TaskRuns` or `PipelineRuns` that use the git resolver) can read arbitrary files from the resolver pod's filesystem, including ServiceAccount tokens. The file contents are returned base64-encoded in `resolutionrequest.status.data`. Versions 1.0.1, 1.3.3, 1.6.1, 1.9.2, and 1.10.2 contain a patch. |
| bcrypt-ruby is a Ruby binding for the OpenBSD bcrypt() password hashing algorithm. Prior to version 3.1.22, an integer overflow in the Java BCrypt implementation for JRuby can cause zero iterations in the strengthening loop. Impacted applications must be setting the cost to 31 to see this happen. The JRuby implementation of bcrypt-ruby (`BCrypt.java`) computes the key-strengthening round count as a signed 32-bit integer. When `cost=31` (the maximum allowed by the gem), signed integer overflow causes the round count to become negative, and the strengthening loop executes **zero iterations**. This collapses bcrypt from 2^31 rounds of exponential key-strengthening to effectively constant-time computation — only the initial EksBlowfish key setup and final 64x encryption phase remain. The resulting hash looks valid (`$2a$31$...`) and verifies correctly via `checkpw`, making the weakness invisible to the application. This issue is triggered only when cost=31 is used or when verifying a `$2a$31$` hash. This problem has been fixed in version 3.1.22. As a workaround, set the cost to something less than 31. |
| Intake is a package for finding, investigating, loading and disseminating data. Prior to version 2.0.9, the shell() syntax within parameter default values appears to be automatically expanded during the catalog parsing process. If a catalog contains a parameter default such as shell(<command>), the command may be executed when the catalog source is accessed. This means that if a user loads a malicious catalog YAML, embedded commands could execute on the host system. Version 2.0.9 mitigates the issue by making getshell False by default everywhere. |
| DiceBear is an avatar library for designers and developers. Prior to version 9.4.2, the `ensureSize()` function in `@dicebear/converter` used a regex-based approach to rewrite SVG `width`/`height` attributes, capping them at 2048px to prevent denial of service. This size capping could be bypassed by crafting SVG input that causes the regex to match a non-functional occurrence of `<svg` before the actual SVG root element. When the SVG is subsequently rendered via `@resvg/resvg-js` on the Node.js code path, it renders at the attacker-specified dimensions, potentially causing out-of-memory crashes. In version 9.4.2, the regex-based approach has been replaced with XML-aware processing using `fast-xml-parser` to correctly identify and modify the SVG root element's attributes. Additionally, a `fitTo` constraint has been added to the `renderAsync` call as defense-in-depth, ensuring the rendered output is always bounded regardless of SVG content. |
| Claude Code is an agentic coding tool. Versions prior to 2.1.53 resolved the permission mode from settings files, including the repo-controlled .claude/settings.json, before determining whether to display the workspace trust confirmation dialog. A malicious repository could set permissions.defaultMode to bypassPermissions in its committed .claude/settings.json, causing the trust dialog to be silently skipped on first open. This allowed a user to be placed into a permissive mode without seeing the trust confirmation prompt, making it easier for an attacker-controlled repository to gain tool execution without explicit user consent. This issue has been patched in version 2.1.53. |
| HAPI FHIR is a complete implementation of the HL7 FHIR standard for healthcare interoperability in Java. Prior to version 6.9.0, when setting headers in HTTP requests, the internal HTTP client sends headers first to the host in the initial URL but also, if asked to follow redirects and a 30X HTTP response code is returned, to the host mentioned in URL in the Location: response header value. Sending the same set of headers to subsequent hosts is a problem as this header often contains privacy sensitive information or data that could allow others to impersonate the client's request. This issue has been patched in release 6.9.0. No known workarounds are available. |
| Cross-site Scripting (XSS) stored vulnerability in Tawk Live Chat. This vulnerability allows an attacker to execute JavaScript code in the victim's browser by uploading a malicious PDF with JavaScript payload through the chatbot. The PDF is stored by the application and subsequently displayed without proper sanitisation when other users access it. This vulnerability can be exploited to steal sensitive user data, such as session cookies, or to perform actions on behalf of the user. |
| An out-of-band SQL injection vulnerability (OOB SQLi) has been detected in the Performance Evaluation (EDD) application developed by Gabinete Técnico de Programación. Exploiting this vulnerability in the parameter 'Id_usuario' and 'Id_evaluacion’ in ‘/evaluacion_hca_evalua.aspx’, could allow an attacker to extract sensitive information from the database through external channels, without the affected application returning the data directly, compromising the confidentiality of the stored information. |
| A vulnerability was identified in PbootCMS up to 3.2.12. The impacted element is the function checkUsername of the file apps/home/controller/MemberController.php of the component Member Login. The manipulation of the argument Username leads to sql injection. The attack may be initiated remotely. The exploit is publicly available and might be used. |
| SimpleJWT is a simple JSON web token library written in PHP. Prior to version 1.1.1, an unauthenticated attacker can perform a Denial of Service via JWE header tampering when PBES2 algorithms are used. Applications that call JWE::decrypt() on attacker-controlled JWEs using PBES2 algorithms are affected. This issue has been patched in version 1.1.1. |
