| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
md raid: fix hang when stopping arrays with metadata through dm-raid
When using device-mapper's dm-raid target, stopping a RAID array can cause
the system to hang under specific conditions.
This occurs when:
- A dm-raid managed device tree is suspended from top to bottom
(the top-level RAID device is suspended first, followed by its
underlying metadata and data devices)
- The top-level RAID device is then removed
Removing the top-level device triggers a hang in the following sequence:
the dm-raid destructor calls md_stop(), which tries to flush the
write-intent bitmap by writing to the metadata sub-devices. However, these
devices are already suspended, making them unable to complete the write-intent
operations and causing an indefinite block.
Fix:
- Prevent bitmap flushing when md_stop() is called from dm-raid
destructor context
and avoid a quiescing/unquescing cycle which could also cause I/O
- Still allow write-intent bitmap flushing when called from dm-raid
suspend context
This ensures that RAID array teardown can complete successfully even when the
underlying devices are in a suspended state.
This second patch uses md_is_rdwr() to distinguish between suspend and
destructor paths as elaborated on above. |
| MISP is an open source threat intelligence and sharing platform. Prior to 2.5.37, MISP Collections did not enforce RFC 4122 UUID validation on the uuid field. As a result, a user able to create or modify Collection records could submit malformed UUID values, potentially causing integrity issues or unexpected behaviour in code paths that assume Collection UUIDs are valid identifiers. This vulnerability is fixed in 2.5.37. |
| In the Linux kernel, the following vulnerability has been resolved:
media: verisilicon: Avoid G2 bus error while decoding H.264 and HEVC
For the i.MX8MQ platform, there is a hardware limitation: the g1 VPU and
g2 VPU cannot decode simultaneously; otherwise, it will cause below bus
error and produce corrupted pictures, even potentially lead to system hang.
[ 110.527986] hantro-vpu 38310000.video-codec: frame decode timed out.
[ 110.583517] hantro-vpu 38310000.video-codec: bus error detected.
Therefore, it is necessary to ensure that g1 and g2 operate alternately.
This allows for successful multi-instance decoding of H.264 and HEVC.
To achieve this, g1 and g2 share the same v4l2_m2m_dev, and then the
v4l2_m2m_dev can handle the scheduling. |
| libsixel is a SIXEL encoder/decoder implementation derived from kmiya's sixel. From to 1.8.7-r1, a signed integer overflow in the SIXEL parser's image-buffer doubling loop can lead to an out-of-bounds heap write in sixel_decode_raw_impl. context->pos_x grows by repeat_count on every sixel character with no upper bound check. Once pos_x approaches INT_MAX, the expression "pos_x + repeat_count" used to size the image buffer overflows signed int. Depending on how the overflow wraps, the resize check that should reject oversized buffers can be bypassed, after which a subsequent write computes a large attacker-influenced offset into image->data and writes past the allocation. Reachable from any caller that decodes attacker-supplied SIXEL data, including img2sixel. This vulnerability is fixed in 1.8.7-r2. |
| The snorkel library thru v0.10.0 contains an insecure deserialization vulnerability (CWE-502) in the Trainer.load() method of the Trainer class. The method loads model checkpoint files using torch.load() without enabling the security-restrictive weights_only=True parameter. This default behavior allows the deserialization of arbitrary Python objects via the Pickle module. A remote attacker can exploit this by providing a maliciously crafted model file, leading to arbitrary code execution on the victim's system when the file is loaded via the vulnerable method. |
| libsixel is a SIXEL encoder/decoder implementation derived from kmiya's sixel. From to 1.8.7-r1, a wrong NULL check after an allocation call in sixel_decode_raw and sixel_decode causes a NULL pointer dereference whenever the allocation fails. The check tests the address of the output parameter (always non-NULL) instead of the value the malloc returned. On allocation failure, the function continues and writes through a NULL pointer, crashing the process. This is a denial of service against any caller of these public APIs that hits a low-memory condition. This vulnerability is fixed in 1.8.7-r2. |
| The MCP Registry provides MCP clients with a list of MCP servers, like an app store for MCP servers. Prior to 1.7.7, the public catalogue UI served at GET / (file internal/api/handlers/v0/ui_index.html) is vulnerable to stored cross-site scripting via the server.websiteUrl field of any published server.json. Server-side validation in internal/validators/validators.go (validateWebsiteURL) only checks that the URL parses, is absolute, and uses the https scheme; it does not reject quote characters. Client-side, the value is interpolated into a double-quoted href attribute via innerHTML, using a homegrown escapeHtml helper that performs the standard textContent → innerHTML round-trip. Per the HTML serialisation algorithm, that round-trip encodes only &, <, > and U+00A0 inside text nodes — it does not encode " or '. A literal " in websiteUrl therefore breaks out of the href attribute, allowing arbitrary on* event handlers to be appended to the same <a> element. The Content-Security-Policy on / is script-src 'self' 'unsafe-inline' https://cdn.tailwindcss.com, so the injected event handlers execute. Any user able to obtain a publish token (e.g. via POST /v0/auth/github-at with their own GitHub account, or POST /v0/auth/none on a deployment that has anonymous auth enabled) can plant a poisoned record visible to every visitor of the registry homepage. This vulnerability is fixed in 1.7.7. |
| A use-after-free flaw was found in the netfilter subsystem of the Linux kernel. If the catchall element is garbage-collected when the pipapo set is removed, the element can be deactivated twice. This can cause a use-after-free issue on an NFT_CHAIN object or NFT_OBJECT object, allowing a local unprivileged user with CAP_NET_ADMIN capability to escalate their privileges on the system. |
| Inappropriate implementation in Media in Google Chrome on iOS prior to 148.0.7778.168 allowed a remote attacker who had compromised the renderer process to perform an out of bounds memory read via a crafted HTML page. (Chromium security severity: Medium) |
| The MCP Registry provides MCP clients with a list of MCP servers, like an app store for MCP servers. Prior to 1.7.7, the Registry's HTTP-based namespace verification (POST /v0/auth/http, POST /v0.1/auth/http) uses safeDialContext (internal/api/handlers/v0/auth/http.go:67-110) to refuse dialling private/internal addresses when fetching the well-known public-key file from a publisher-supplied domain. The blocklist (isBlockedIP, lines 125-133) relies entirely on Go stdlib's IsLoopback / IsPrivate / IsLinkLocalUnicast / IsMulticast / IsUnspecified plus a manual CGNAT range. None of these cover IPv6 6to4 (2002::/16), NAT64 (64:ff9b::/96 and 64:ff9b:1::/48 per RFC 8215), or deprecated site-local (fec0::/10) — all of which encode arbitrary IPv4 in the address bits and tunnel to RFC1918 / cloud-metadata services on dual-stack / NAT64-enabled hosts. This vulnerability is fixed in 1.7.7. |
| Gitsign is a keyless Sigstore to signing tool for Git commits with your a GitHub / OIDC identity. Prior to 0.16.0, gitsign verify and gitsign verify-tag re-encode commit/tag objects through go-git's EncodeWithoutSignature before checking the signature, instead of verifying against the raw git object bytes. For malformed objects with duplicate tree headers, git-core and go-git parse different trees: git-core uses the first, go-git uses the second. A signature crafted over the go-git-normalized form (second tree) passes gitsign verify while git-core resolves the commit to a completely different tree. This breaks the invariant that a verified signature, the commit semantics git-core presents to users, and the object hash logged in Rekor all refer to the same content. This vulnerability is fixed in 0.16.0. |
| MISP is an open source threat intelligence and sharing platform. Prior to 2.5.37, an improper access control vulnerability in the authentication key reset functionality allowed an authenticated organization administrator to reset authentication keys belonging to site administrator accounts within the same organization. Because non-site administrators were not explicitly prevented from accessing or resetting site administrator auth keys, an attacker with organization administrator privileges could potentially obtain a newly generated auth key for a higher-privileged account and use it to escalate privileges. This vulnerability is fixed in 2.5.37. |
| MISP is an open source threat intelligence and sharing platform. Prior to 2.5.37, a SQL injection vulnerability existed in the handling of user-controlled ordering parameters in the event and shadow attribute listing endpoints. The affected code accepted order or sort values from request parameters and incorporated them into database query ordering clauses without sufficient validation of the requested field name. An attacker with access to the affected endpoints could craft a malicious ordering parameter to manipulate the generated SQL query. Depending on database permissions and query context, this could potentially allow unauthorized access to data, modification of query behavior, or other database-level impact. This vulnerability is fixed in 2.5.37. |
| SQLBot is an intelligent Text-to-SQL system based on large language models and RAG. Prior to 1.8.0, SQLBot contains a Cross-Workspace IDOR (Insecure Direct Object Reference) and Authorization Bypass vulnerability in the /api/v1/datasource/exportDsSchema and /api/v1/datasource/uploadDsSchema endpoints. An attacker can access and modify database schemas and data sources belonging to other tenants/workspaces. This vulnerability is fixed in 1.8.0. |
| Oinone Pamirs 7.0.0 contains a code execution vulnerability via ScriptRunner. The method ScriptRunner.run(String expression, String type, Map<String, Object> context) evaluates attacker-controlled script expressions through the underlying script engine without sandboxing or allowlist restrictions. |
| Gitsign is a keyless Sigstore to signing tool for Git commits with your a GitHub / OIDC identity. From 0.4.0 to before 0.15.0, CertVerifier.Verify() in pkg/git/verifier.go unconditionally dereferences certs[0] after sd.GetCertificates() without checking the slice length. A CMS/PKCS7 signed message with an empty certificate set is a structurally valid DER payload; GetCertificates() returns an empty slice with no error, causing an immediate index-out-of-range panic. On the gitsign --verify code path (the GPG-compatible mode invoked by git verify-commit), the panic is silently recovered by internal/io/streams.go's Wrap() function, which returns nil instead of an error. main.go then exits with code 0, causing exit-code-only verification callers to interpret the failed verification as success. This vulnerability is fixed in 0.15.0. |
| OPNsense is a FreeBSD based firewall and routing platform. Prior to 26.1.7, the XMLRPC method opnsense.restore_config_section fails to sanitize user supplied input leading to Remote Code Execution. This vulnerability is fixed in 26.1.7. |
| The MCP Registry provides MCP clients with a list of MCP servers, like an app store for MCP servers. Prior to 1.7.6, the client-side and server-side GitHub OIDC flow is bound only to a global audience string, not to the specific registry instance being targeted. On the client side, the publisher always appends audience=mcp-registry when requesting the GitHub Actions ID token, regardless of the selected --registry URL. On the server side, the exchange endpoint validates only that same fixed audience and then derives publish permissions directly from repository_owner. As a result, a token legitimately obtained while interacting with one registry deployment remains acceptable to any other deployment that shares the same code and audience string. This vulnerability is fixed in 1.7.6. |
| The snorkel library thru v0.10.0 contains a critical insecure deserialization vulnerability (CWE-502) in the BaseLabeler.load() method of the BaseLabeler class. The method loads serialized labeler models using the unsafe pickle.load() function on user-supplied file paths without any validation or security controls. Python's pickle module is inherently dangerous for deserializing untrusted data, as it can execute arbitrary code during the deserialization process. A remote attacker can exploit this by providing a maliciously crafted pickle file, leading to arbitrary code execution on the victim's system when the file is loaded via the vulnerable method. |
| In the Linux kernel, the following vulnerability has been resolved:
media: i2c: ov5647: Initialize subdev before controls
In ov5647_init_controls() we call v4l2_get_subdevdata, but it is
initialized by v4l2_i2c_subdev_init() in the probe, which currently
happens after init_controls(). This can result in a segfault if the
error condition is hit, and we try to access i2c_client, so fix the
order. |
