| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm_early_create: fix freeing used table on dm_resume failure
If dm_resume fails, the kernel attempts to free table with
dm_table_destroy, but the table was already instantiated with
dm_swap_table. This commit skips the call to dm_table_destroy in this
case. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: fix a bug if the bio is out of limits
If dm_integrity_check_limits fails, the code would exit with
DM_MAPIO_KILL. However, the range would be already locked at this point,
and it wouldn't be unlocked, resulting in a deadlock. Let's move the
limit check up, so that when it exits, no resources are leaked. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-integrity: don't increment hash_offset twice
hash_offset is already incremented in the loop "for (i = 0; i < to_copy;
i++, ts--)". Do not increment it again. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-verity: fix buffer overflow in FEC calculation
There's a buffer overflow in dm-verity-fec:
if (neras && *neras <= v->fec->roots)
fio->erasures[(*neras)++] = i;
This allows *neras to reach roots + 1 (the post-increment pushes it past
roots). This value is then passed as no_eras to decode_rs8(). Inside the
RS decoder (lib/reed_solomon/decode_rs.c:113-121), the erasure locator
polynomial loop writes lambda[j] where j can reach nroots + 1 — one
element past the end of lambda[] (which is sized nroots + 1, valid
indices 0..nroots). The out-of-bounds write lands on syn[0], corrupting
the syndrome buffer. |
| In the Linux kernel, the following vulnerability has been resolved:
dma-fence: Make dma_fence_dedup_array() robust against 0-count input
dma_fence_dedup_array() returns 1 when called with num_fences == 0:
the for-loop body never executes, j stays at 0, and the final
`return ++j` yields 1. This contradicts both the kernel-doc ("Return:
Number of unique fences remaining in the array") and the natural
expectation that 0 input gives 0 output.
The caller __dma_fence_unwrap_merge() bails out via the
`if (count == 0 || count == 1)` fast path and so is save.
But amdgpu_userq_wait_*() could reach the dedup call with a zero local
count and dereference an uninitialized fence slot in the array.
Make the contract match the documentation by returning 0 early. This
also skips an unnecessary sort() call on an empty array. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Fix use-after-free in amdxdna_gem_dmabuf_mmap()
When vm_insert_pages() fails, the error path calls vma->vm_ops->close(vma)
which internally calls drm_gem_vm_close() → drm_gem_object_put(),
releasing the GEM object reference acquired at the start of the function.
However, the close_vma label then falls through to put_obj, which calls
drm_gem_object_put() a second time on the same object.
If the first put releases the last reference, the object is freed and the
second put accesses freed memory, causing a use-after-free.
Fix by returning directly from close_vma instead of falling through to
put_obj, since the close handler already performs all necessary cleanup
including the object put. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Use caller client for debug BO sync
amdxdna_drm_sync_bo_ioctl() looks up args->handle in the ioctl caller's
drm_file. For SYNC_DIRECT_FROM_DEVICE, it then calls
amdxdna_hwctx_sync_debug_bo(), but passes abo->client.
amdxdna_hwctx_sync_debug_bo() uses the passed client both as the handle
namespace for debug_bo_hdl and as the owner of the hardware context xarray.
Those must match the file that supplied args->handle. The BO's stored
client pointer is object state, not the ioctl context.
Pass filp->driver_priv instead, matching the original handle lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Reject firmware log with size smaller than header
fw_log_from_bo() validates the tracing buffer header_size and that the
log fits within the BO, but never checks that log->size is at least
log->header_size. fw_log_print_buffer() then computes:
u32 data_size = log->size - log->header_size;
which underflows to a near-U32_MAX value when firmware reports a log whose
size is smaller than its header. That huge data_size defeats the
log_start/log_end bounds clamps added by commit dd1311bcf0e6 ("accel/ivpu:
Add bounds checks for firmware log indices"), so fw_log_print_lines() reads
far past the small real data region of the BO. A size of 0 also makes
fw_log_from_bo() advance the offset by 0, causing the callers to loop
forever on the same header.
Reject logs whose size is smaller than the header (which also rejects
size == 0). |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: xen: scsiback: Free unsubmitted command instead of double-putting it
scsiback_get_pend_req() obtains a command tag and returns a vscsibk_pend
whose embedded se_cmd has only been memset to 0, so its cmd_kref is 0;
the se_cmd is initialised (kref_init() via target_init_cmd()) only
later, in scsiback_cmd_exec(), on the successful VSCSIIF_ACT_SCSI_CDB
path. The two error paths in scsiback_do_cmd_fn() taken before the
command is submitted -- a failed scsiback_gnttab_data_map() and an
unknown ring_req.act -- call
transport_generic_free_cmd(&pending_req->se_cmd, 0), which kref_put()s a
refcount of 0. That underflows it ("refcount_t: underflow;
use-after-free") and, as the release function is not run, leaks the
command tag.
Impact: a pvSCSI guest can leak every command tag of a LUN's session,
stopping the LUN, by submitting requests with a bad grant reference or
an unknown request type; under panic_on_warn the refcount underflow
panics the host.
Add a helper that just returns the tag with target_free_tag() and sends
the error response. It frees the tag while the v2p reference still pins
the session, and snapshots the response fields beforehand because
freeing the tag can let another ring reuse the pending_req slot. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: Bound PR-OUT TransportID parsing to the received buffer
core_scsi3_decode_spec_i_port() and core_scsi3_emulate_register_and_move()
hand the raw PERSISTENT RESERVE OUT parameter buffer to
target_parse_pr_out_transport_id() without telling it how many bytes are
valid. For an iSCSI TransportID (FORMAT CODE 01b),
iscsi_parse_pr_out_transport_id() locates the ",i,0x" ISID separator with
an unbounded strstr() (and on the error path prints the name with a further
unbounded "%s"). An initiator can submit a TransportID whose iSCSI name
contains neither a ",i,0x" substring nor a NUL terminator, filling the
parameter list to its end, so the scan runs off the end of the buffer.
When the parameter list spans more than one page the buffer is a multi-page
vmap (transport_kmap_data_sg()), so the over-read walks into the trailing
vmalloc guard page and oopses (KASAN: vmalloc-out-of-bounds in strstr). It
is reachable by any fabric that delivers a PR OUT to a device exported
through an iSCSI TPG, including a guest via vhost-scsi.
Pass the number of received bytes down to the parser and validate the iSCSI
TransportID's own self-described length (ADDITIONAL LENGTH + 4) once, up
front: reject it if it is below the spc4r17 minimum or larger than the
received buffer, then bound the separator search, the ISID walk and the
name copy by that length. This is the length check the callers already
perform after the parse (core_scsi3_decode_spec_i_port() compares tid_len
against tpdl, core_scsi3_emulate_register_and_move() validates it against
data_length), moved ahead of the scan. Also drop the unbounded "%s" of the
unterminated name.
Add per-format explicit name-length checks before copying into i_str,
rather than silently truncating with min_t: for FORMAT CODE 00b reject if
the descriptor body (tid_len - 4 bytes) cannot fit in
i_str[TRANSPORT_IQN_LEN]; for FORMAT CODE 01b reject if the name portion
(from &buf[4] up to the separator) cannot fit. Both checks make the bounds
intent explicit at each format branch.
While here, also reject a FORMAT CODE 01b TransportID whose ",i,0x"
separator sits at the very end of the descriptor: that leaves an empty ISID
and points the returned port nexus pointer at buf + tid_len, one past the
descriptor, which the registration code (__core_scsi3_locate_pr_reg(),
__core_scsi3_alloc_registration()) then dereferences as the ISID string --
the same over-read of the parameter buffer for a malformed descriptor. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: target: core: Fix iSCSI ISID use-after-free in REGISTER AND MOVE
core_scsi3_emulate_pro_register_and_move() maps the PERSISTENT RESERVE OUT
parameter list with transport_kmap_data_sg() and parses the destination
TransportID with target_parse_pr_out_transport_id(). For an iSCSI
TransportID (FORMAT CODE 01b), iscsi_parse_pr_out_transport_id() returns
the ISID in iport_ptr as a raw pointer into that mapped buffer.
The function then unmaps the buffer with transport_kunmap_data_sg() before
dereferencing iport_ptr in strcmp(), __core_scsi3_locate_pr_reg() and
core_scsi3_alloc_registration(). When the parameter list spans more than
one page (PARAMETER LIST LENGTH > 4096), transport_kmap_data_sg() uses
vmap() and transport_kunmap_data_sg() does vunmap(), so the kernel virtual
address backing iport_ptr is torn down and every subsequent dereference is
a use-after-free read of the unmapped region.
Keep the parameter list mapped until iport_ptr is no longer needed: drop
the early transport_kunmap_data_sg() and unmap once on the success path,
right before returning. The error paths already unmap through the existing
"if (buf) transport_kunmap_data_sg(cmd)" at the out: label, which now runs
on every post-map error exit because buf is no longer cleared early. Only
reads of the mapping happen while spinlocks are held; the map and unmap
calls remain outside any lock. The sibling caller
core_scsi3_decode_spec_i_port() already uses the buffer before unmapping it
and is left unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/resctrl: Fix use-after-free during unmount
During unmount or failure teardown all mon_data structures that contain
monitoring event file private data are freed after which kernfs nodes are
removed. However, the RDT_DELETED flag is never set for the statically
allocated default resource group.
A concurrent reader of an event file associated with the default resource
group may, after dropping kernfs active protection, block on rdtgroup_mutex
while unmount proceeds to free the file private data and destroy the kernfs
node without waiting for the reader.
When the mutex is released, the reader wakes up, observes that RDT_DELETED
is not set for the default group, and dereferences the already-freed
file private data.
The scenario can be depicted as follows:
CPU0 CPU1
/*
* Default resource group's
* monitoring data accessible via
* kernfs file with kernfs_node::priv
* pointing to a struct mon_data.
* User opens the file for reading.
*/
rdtgroup_mondata_show() /* arch encounters fatal error */
rdtgroup_kn_lock_live() resctrl_exit()
atomic_inc(&rdtgroup_default.waitcount) cpus_read_lock()
kernfs_break_active_protection(kn) mutex_lock(&rdtgroup_mutex)
cpus_read_lock() resctrl_fs_teardown()
mutex_lock(&rdtgroup_mutex) rmdir_all_sub()
mon_put_kn_priv()
/* Delete all mon_data structures */
rdtgroup_destroy_root()
kernfs_destroy_root()
rdtgroup_default.kn = NULL
mutex_unlock(&rdtgroup_mutex)
/*
* rdtgroup_default.flags is empty so
* rdtgroup_kn_lock_live() returns
* &rdtgroup_default
*/
md = of->kn->priv;
/* md points to freed mon_data */
Set RDT_DELETED for the default group unconditionally since the flag does
not lead to the freeing of this statically allocated group.
Do not allow a new resctrl mount if there are any waiters on default group
of previous mount. A new mount will re-initialize the default group that
would appear to waiters from previous mount as though the default group is
accessible causing them to access the mon_data structures from the previous
mount that have been removed. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: macsec: fix use-after-free of metadata_dst on RX SC delete
When an offloaded MACsec RX SC is deleted, macsec_del_rxsc_ctx() freed
the per-SC metadata_dst with metadata_dst_free(), which kfree()s the
object unconditionally and ignores the dst reference count. The RX
datapath in mlx5e_macsec_offload_handle_rx_skb() looks up the SC under
rcu_read_lock() via xa_load(), takes a reference with dst_hold() and
attaches the dst to the skb with skb_dst_set(). A reader that already
obtained the rx_sc pointer can race with the delete path and operate on
freed memory.
Fix the owner side by dropping the reference with dst_release() instead
of freeing unconditionally, and convert the RX datapath to
dst_hold_safe() so a reader racing the SC delete cannot attach a dst
whose last reference was just dropped; only attach it when a reference
was actually taken.
mlx5e_macsec_add_rxsc() also published sc_xarray_element via xa_alloc()
before rx_sc->md_dst was allocated and initialised, so a datapath reader
that looked the SC up by fs_id could observe rx_sc with md_dst still
NULL or, on weakly-ordered architectures, a non-NULL md_dst pointer
whose contents were not yet visible. NULL-check the xa_load() result and
md_dst on the datapath, and reorder add_rxsc() so the xa_alloc() publish
happens only after md_dst is fully initialised; the xarray RCU publish
then pairs with the rcu_read_lock()/xa_load() in the datapath.
Note: macsec_del_rxsc_ctx() also kfree()s rx_sc->sc_xarray_element
without an RCU grace period while the same datapath reads it under
rcu_read_lock(); that is a separate pre-existing issue left to a
follow-up patch.
Found by 0sec automated security-research tooling (https://0sec.ai). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/user_events: Fix use-after-free in user_event_mm_dup()
user_event_mm_dup() walks the parent mm's enabler list locklessly under
rcu_read_lock() during fork() (from copy_process()); it does not take
event_mutex:
rcu_read_lock();
list_for_each_entry_rcu(enabler, &old_mm->enablers, mm_enablers_link)
enabler->event = user_event_get(orig->event);
user_event_enabler_destroy() removes an enabler from that list with
list_del_rcu() and then, without waiting for a grace period, drops the
enabler's user_event reference with user_event_put() and frees the enabler
with kfree(). A reader that loaded the enabler before the list_del_rcu()
can still be walking it, which leads to two use-after-frees:
- kfree(enabler) frees the enabler while that reader dereferences
enabler->event.
- user_event_put() may drop the last reference to the user_event, which
is then freed (via delayed_destroy_user_event() on a work queue), while
the same reader does user_event_get(orig->event) on it.
Both are reachable by an unprivileged task that can open user_events_data:
one multithreaded process that registers an enabler and then concurrently
unregisters it and calls fork() triggers the race. KASAN reports a
slab-use-after-free in user_event_mm_dup() during clone(), with a
"refcount_t: addition on 0" warning when the user_event is freed.
The enabler use-after-free was found first; the user_event one was reported
by XIAO WU, and the earlier enabler-only fix did not address it.
Defer both the user_event_put() and the kfree(enabler) to a work item
queued with queue_rcu_work(), so they run only after an RCU grace period,
once all readers walking the enabler list have finished. The put must run
in process context because user_event_put() takes event_mutex on the last
reference, so a work queue is used rather than call_rcu(). The now-unlocked
put lets the locked argument of user_event_enabler_destroy() be removed;
all callers are updated. |
| In the Linux kernel, the following vulnerability has been resolved:
locking/rt: Fix the incorrect RCU protection in rt_spin_unlock()
rt_spin_unlock() releases the RCU protection before unlocking the
lock. That opens the door for the following UAF scenario:
T1 T2
spin_lock(&p->lock); rcu_read_lock();
invalidate(p); p = rcu_dereference(ptr);
rcu_assign_pointer(ptr, NULL); if (!p) return;
spin_unlock(&p->lock); spin_lock(&p->lock)
lock(&lock->lock);
rcu_read_lock();
kfree_rcu(p); rcu_read_unlock();
....
spin_unlock(&p->lock)
rcu_read_unlock(); // Ends grace period
rcu_do_batch()
kfree(p);
UAF -> rt_mutex_cmpxchg_release(&lock->lock...)
Regular spinlocks keep preemption disabled accross the unlock operation,
which provides full RCU protection, but the RT substitution fails to
resemble that. Same applies for the rwlock substitution.
Move the rcu_read_unlock() invocation past the unlock operations to match
the non-RT semantics. This makes it asymmetric vs. rt_xxx_lock(), but
that's harmless as the caller needs to hold RCU read lock across the lock
operation. The migrate_enable() call stays before the unlock operation
because there is no per CPU operation in the unlock path which would
require migration to be kept disabled. |
| In the Linux kernel, the following vulnerability has been resolved:
cpu: hotplug: Preserve per instance callback errors
cpuhp_invoke_callback() unwinds earlier callbacks for the same
hotplug state when one instance fails. The rollback path currently
reuses ret, so a successful rollback can hide the original error and
make the failed transition look successful.
Keep the rollback result separate from the original error. |
| In the Linux kernel, the following vulnerability has been resolved:
cpu: hotplug: Bound hotplug states sysfs output
states_show() adds CPU hotplug state names into a single sysfs buffer
using sprintf(). With enough registered states, this can write past the
end of the PAGE_SIZE buffer.
Use sysfs_emit_at() so output is bounded. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Validate the packet length reported by the NIC
Validate the packet length reported in the RX CQE before passing it
to skb processing. The CQE is supplied by the NIC device and should
not be blindly trusted. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Sync page pool RX frags for CPU
MANA allocates RX buffers from page pool fragments when frag_count is
greater than 1. In that case the buffers remain DMA mapped by page pool
and the RX completion path does not call dma_unmap_single(). As a result,
the implicit sync-for-CPU normally performed by dma_unmap_single() is
missing before the packet data is passed to the networking stack.
This breaks RX on configurations which require explicit DMA syncing, for
example when booted with swiotlb=force.
Fix this by recording the page pool page and DMA sync offset when the RX
buffer is allocated, and syncing the received packet range for CPU access
before handing the RX buffer to the stack. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sit: require CAP_NET_ADMIN in the device netns for changelink
ipip6_changelink() operates on at most two netns, dev_net(dev) and the
tunnel link netns t->net. They differ once the device is created in or
moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in t->net can rewrite a tunnel that
lives in t->net.
Gate ipip6_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. sit was the one tunnel type not covered
by the recent series that added this check to the other changelink()
handlers. |
