| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Arcane provides modern docker management. Prior to 1.13.0, Arcane has a command injection in the updater service. Arcane’s updater service supported lifecycle labels com.getarcaneapp.arcane.lifecycle.pre-update and com.getarcaneapp.arcane.lifecycle.post-update that allowed defining a command to run before or after a container update. The label value is passed directly to /bin/sh -c without sanitization or validation. Because any authenticated user (not limited to administrators) can create projects through the API, an attacker can create a project that specifies one of these lifecycle labels with a malicious command. When an administrator later triggers a container update (either manually or via scheduled update checks), Arcane reads the lifecycle label and executes its value as a shell command inside the container. This vulnerability is fixed in 1.13.0. |
| A Time-of-check Time-of-use (TOCTOU) Race Condition vulnerability in the method to collect FPC Ethernet firmware statistics of Juniper Networks Junos OS on MX10k Series allows a local, low-privileged attacker executing the 'show system firmware' CLI command to cause an LC480 or LC2101 line card to reset.
On MX10k Series systems with LC480 or LC2101 line cards, repeated execution of the 'show system firmware' CLI command can cause the line card to crash and restart. Additionally, some time after the line card crashes, chassisd may also crash and restart, generating a core dump.This issue affects Junos OS on MX10k Series:
* all versions before 21.2R3-S10,
* from 21.4 before 21.4R3-S9,
* from 22.2 before 22.2R3-S7,
* from 22.4 before 22.4R3-S6,
* from 23.2 before 23.2R2-S2,
* from 23.4 before 23.4R2-S3,
* from 24.2 before 24.2R2. |
| A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) and Cisco ISE Passive Identity Connector (ISE-PIC) could allow an authenticated, remote attacker to conduct cross-site scripting (XSS) attacks against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| The Vert.x Web static handler component cache can be manipulated to deny the access to static files served by the handler using specifically crafted request URI.
The issue comes from an improper implementation of the C. rule of section 5.2.4 of RFC3986 and is fixed in Vert.x Core component (used by Vert.x Web): https://github.com/eclipse-vertx/vert.x/pull/5895
Steps to reproduce
Given a file served by the static handler, craft an URI that introduces a string like bar%2F..%2F after the last / char to deny the access to the URI with an HTTP 404 response. For example https://example.com/foo/index.html can be denied with https://example.com/foo/bar%2F..%2Findex.html
Mitgation
Disabling Static Handler cache fixes the issue.
StaticHandler staticHandler = StaticHandler.create().setCachingEnabled(false); |
| DPanel is an open source server management panel written in Go. Prior to 1.9.2, DPanel has an arbitrary file deletion vulnerability in the /api/common/attach/delete interface. Authenticated users can delete arbitrary files on the server via path traversal. When a user logs into the administrative backend, this interface can be used to delete files. The vulnerability lies in the Delete function within the app/common/http/controller/attach.go file. The path parameter submitted by the user is directly passed to storage.Local{}.GetSaveRealPath and subsequently to os.Remove without proper sanitization or checking for path traversal characters (../). And the helper function in common/service/storage/local.go uses filepath.Join, which resolves ../ but does not enforce a chroot/jail. This vulnerability is fixed in 1.9.2. |
| Istio through 1.28.2 allows iptables rule injection for changing firewall behavior via the traffic.sidecar.istio.io/excludeInterfaces annotation. NOTE: the reporter's position is "this doesn't represent a security vulnerability (pod creators can already exclude sidecar injection entirely)." |
| Easy!Appointments is a self hosted appointment scheduler. In 1.5.2 and earlier, application/core/EA_Security.php::csrf_verify() only enforces CSRF for POST requests and returns early for non-POST methods. Several application endpoints perform state-changing operations while accepting parameters from GET (or $_REQUEST), so an attacker can perform CSRF by forcing a victim's browser to issue a crafted GET request. Impact: creation of admin accounts, modification of admin email/password, and full admin account takeover. |
| A vulnerability in the web-based management interface of Cisco Identity Services Engine (ISE) could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against a user of the interface.
This vulnerability is due to insufficient validation of user-supplied input by the web-based management interface of an affected system. An attacker could exploit this vulnerability by injecting malicious code into specific pages of the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, the attacker must have valid administrative credentials. |
| Roxy-WI is a web interface for managing Haproxy, Nginx, Apache and Keepalived servers. Prior to 8.2.8.2, command injection vulnerability exists in the log viewing functionality that allows authenticated users to execute arbitrary system commands. The vulnerability is in app/modules/roxywi/logs.py line 87, where the grep parameter is used twice - once sanitized and once raw. This vulnerability is fixed in 8.2.8.2. |
| An Improper Check for Unusual or Exceptional Conditions vulnerability in the packet forwarding engine (PFE) of Juniper Networks Junos OS on EX4k Series and QFX5k Series platforms allows an unauthenticated network-adjacent attacker flapping an interface to cause traffic between VXLAN Network Identifiers (VNIs) to drop, leading to a Denial of Service (DoS).
On all EX4k and QFX5k platforms, a link flap in an
EVPN-VXLAN configuration Link Aggregation Group (LAG)
results in Inter-VNI traffic dropping when there are multiple load-balanced next-hop routes for the same destination.
This issue is only applicable to systems that support EVPN-VXLAN Virtual Port-Link Aggregation Groups (VPLAG), such as the QFX5110, QFX5120, QFX5200, EX4100, EX4300, EX4400, and EX4650.
Service can only be restored by restarting the affected FPC via the 'request chassis fpc restart slot <slot-number>' command.
This issue affects Junos OS
on EX4k and QFX5k Series:
* all versions before 21.4R3-S12,
* all versions of 22.2
* from 22.4 before 22.4R3-S8,
* from 23.2 before 23.2R2-S5,
* from 23.4 before 23.4R2-S5,
* from 24.2 before 24.2R2-S3,
* from 24.4 before 24.4R2. |
| NBMonitor 1.6.8 contains a denial of service vulnerability that allows attackers to crash the application by overflowing the registration code input field. Attackers can paste a 256-character buffer into the registration key field to trigger an application crash and potential system instability. |
| Pimcore's Admin Classic Bundle provides a Backend UI for Pimcore. Prior to 2.2.3 and 1.7.16, the API endpoint for listing Predefined Properties in the Pimcore platform lacks adequate server-side authorization checks. Predefined Properties are configurable metadata definitions (e.g., name, key, type, default value) used across documents, assets, and objects to standardize custom attributes and improve editorial workflows, as documented in Pimcore's official properties guide. Testing confirmed that an authenticated backend user without explicit permissions for property management could successfully call the endpoint and retrieve the complete list of these configurations. The vulnerability is fixed in 2.2.3 and 1.7.16. |
| LaSuite Doc is a collaborative note taking, wiki and documentation platform. From 3.8.0 to 4.3.0, a Stored Cross-Site Scripting (XSS) vulnerability exists in the Interlinking feature. When a user creates a link to another document within the editor, the URL of that link is not validated. An attacker with document editing privileges can inject a malicious javascript: URL that executes arbitrary code when other users click on the link. This vulnerability is fixed in 4.4.0. |
| OS Command Injection vulnerability exists in multiple Network Cameras TRIFORA 3 series provided by TOA Corporation, which may allow a logged-in user with the low("monitoring user") or higher privilege to execute an arbitrary OS command. |
| A vulnerability in the web-based management interface of Cisco Evolved Programmable Network Manager (EPNM) and Cisco Prime Infrastructure could allow an authenticated, remote attacker to conduct a stored cross-site scripting (XSS) attack against users of the interface of an affected system.
This vulnerability exists because the web-based management interface does not properly validate user-supplied input. An attacker could exploit this vulnerability by inserting malicious code into specific data fields in the interface. A successful exploit could allow the attacker to execute arbitrary script code in the context of the affected interface or access sensitive, browser-based information. To exploit this vulnerability, an attacker must have valid administrative credentials. |
| Pimcore Web2Print Tools Bundle adds tools for web-to-print use cases to Pimcore. Prior to 5.2.2 and 6.1.1, the application fails to enforce proper server-side authorization checks on the API endpoint responsible for managing "Favourite Output Channel Configurations." Testing revealed that an authenticated backend user without explicitely lacking permissions for this feature was still able to successfully invoke the endpoint and modify or retrieve these configurations. This vulnerability is fixed in 5.2.2 and 6.1.1. |
| A heap overflow in the avi_parse_input_file() function of GPAC v2.4.0 allows attackers to cause a Denial of Service (DoS) via a crafted AVI file. |
| CWE-415: Double Free vulnerability exists that could cause heap memory corruption when the end user imports a malicious project file (SSD file) shared by the attacker into Rapsody. |
| The User Submitted Posts – Enable Users to Submit Posts from the Front End plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'usp_access' shortcode in all versions up to, and including, 20260110 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Related Posts by Taxonomy plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'related_posts_by_tax' shortcode in all versions up to, and including, 2.7.6 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
