| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An authorization issue was addressed with improved validation. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, visionOS 26.6, watchOS 26.6. An app may be able to add contacts without user authorization. |
| An authorization issue was addressed with improved state management. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An attacker with physical access to a locked device may be able to view sensitive user information. |
| The issue was addressed with improved bounds checks. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An app may be able to disclose kernel memory. |
| The issue was addressed with improved checks. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8. A maliciously crafted ZIP archive may bypass Gatekeeper checks. |
| A memory corruption issue was addressed with improved state management. This issue is fixed in Safari 26.6, iOS 26.6 and iPadOS 26.6, macOS Tahoe 26.6, visionOS 26.6, watchOS 26.6. Processing maliciously crafted web content may lead to an unexpected Safari crash. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: misc: usbio: fix disconnect UAF in client teardown
usbio_disconnect() walks usbio->cli_list in reverse and uninitializes each
auxiliary device. auxiliary_device_uninit() drops the device reference, and
for an unbound child that can run usbio_auxdev_release() and free the
containing struct usbio_client.
list_for_each_entry_reverse() advances after the loop body by reading
client->link.prev. If the current client is freed by
auxiliary_device_uninit(), the iterator dereferences freed memory.
Use list_for_each_entry_safe_reverse() so the previous client is
cached before the body can drop the final reference. This preserves
reverse teardown order while keeping the next iterator cursor independent
of the current client's lifetime.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in usbio_disconnect+0x12e/0x150
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
? usbio_disconnect+0x12e/0x150
? srso_alias_return_thunk+0x5/0xfbef5
? __virt_addr_valid+0x188/0x320
? usbio_disconnect+0x12e/0x150
kasan_report+0xe0/0x110
? usbio_disconnect+0x12e/0x150
usbio_disconnect+0x12e/0x150
usb_unbind_interface+0xf3/0x400
really_probe+0x316/0x660
__driver_probe_device+0x106/0x240
driver_probe_device+0x4a/0x110
__device_attach_driver+0xf1/0x1a0
? __pfx___device_attach_driver+0x10/0x10
bus_for_each_drv+0xf9/0x160
? __pfx_bus_for_each_drv+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? trace_hardirqs_on+0x18/0x130
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x44/0x60
__device_attach+0x133/0x2a0
? __pfx___device_attach+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? do_raw_spin_unlock+0x9a/0x100
? srso_alias_return_thunk+0x5/0xfbef5
device_initial_probe+0x55/0x70
bus_probe_device+0x4a/0xd0
device_add+0x9b9/0xc10
? __pfx_device_add+0x10/0x10
? _raw_spin_unlock_irqrestore+0x44/0x60
? srso_alias_return_thunk+0x5/0xfbef5
? lockdep_hardirqs_on_prepare+0xea/0x1a0
? srso_alias_return_thunk+0x5/0xfbef5
? usb_enable_lpm+0x3c/0x260
usb_set_configuration+0xb64/0xf20
usb_generic_driver_probe+0x5f/0x90
usb_probe_device+0x71/0x1b0
really_probe+0x46b/0x660
__driver_probe_device+0x106/0x240
driver_probe_device+0x4a/0x110
__device_attach_driver+0xf1/0x1a0
? __pfx___device_attach_driver+0x10/0x10
bus_for_each_drv+0xf9/0x160
? __pfx_bus_for_each_drv+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? trace_hardirqs_on+0x18/0x130
? srso_alias_return_thunk+0x5/0xfbef5
? _raw_spin_unlock_irqrestore+0x44/0x60
__device_attach+0x133/0x2a0
? __pfx___device_attach+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? do_raw_spin_unlock+0x9a/0x100
? srso_alias_return_thunk+0x5/0xfbef5
device_initial_probe+0x55/0x70
bus_probe_device+0x4a/0xd0
device_add+0x9b9/0xc10
? __pfx_device_add+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? add_device_randomness+0xb7/0xf0
usb_new_device+0x492/0x870
hub_event+0x1b10/0x29c0
? __pfx_hub_event+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? lock_acquire+0x187/0x300
? process_one_work+0x475/0xb90
? srso_alias_return_thunk+0x5/0xfbef5
? lock_release+0xc8/0x290
? srso_alias_return_thunk+0x5/0xfbef5
process_one_work+0x4d7/0xb90
? __pfx_process_one_work+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? srso_alias_return_thunk+0x5/0xfbef5
? __list_add_valid_or_report+0x37/0xf0
? __pfx_hub_event+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
worker_thread+0x2d8/0x570
? __pfx_worker_thread+0x10/0x10
kthread+0x1ad/0x1f0
? __pfx_kthread+0x10/0x10
ret_from_fork+0x3c9/0x540
? __pfx_ret_from_fork+0x10/0x10
? srso_alias_return_thunk+0x5/0xfbef5
? __switch_to+0x2e9/0x730
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
USB: chaoskey: Fix slab-use-after-free in chaoskey_release()
The chaoskey driver has a use-after-free bug in its release routine.
If the user closes the device file after the USB device has been
unplugged, a debugging log statement will try to access the
usb_interface structure after it has been deallocated:
BUG: KASAN: slab-use-after-free in dev_driver_string (drivers/base/core.c:2406)
Read of size 8 at addr ffff888168e8a0b8 by task chaoskey_raw_re/10106
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
print_report (mm/kasan/report.c:378 mm/kasan/report.c:482)
kasan_report (mm/kasan/report.c:595)
dev_driver_string (drivers/base/core.c:2406)
__dynamic_dev_dbg (lib/dynamic_debug.c:906)
chaoskey_release (drivers/usb/misc/chaoskey.c:323)
__fput (fs/file_table.c:510)
fput_close_sync (fs/file_table.c:615)
__x64_sys_close (fs/open.c:1507 fs/open.c:1492 fs/open.c:1492)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
The driver's last reference to the interface structure is dropped in
the chaoskey_free() routine, so the code must not use the interface --
even in a debugging statement -- after that routine returns.
(Exception: If we know that another reference is held by someone else,
such as the device core while the disconnect routine runs, there's no
problem. Thanks to Johan Hovold for pointing this out.)
Since the bad access is part of an unimportant debugging statement,
we can fix the problem simply by removing the whole statement. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: fix use-after-free on marvell probe failure
Make sure to stop any TX URBs submitted during Marvell OOB wakeup
configuration on later probe failures to avoid use-after-free in the
completion callback.
This issue was reported by Sashiko while reviewing a fix for a wakeup
source leak in the btusb probe errors paths. |
| In the Linux kernel, the following vulnerability has been resolved:
vfio/pci: Release the VGA arbiter client on register_device() failure
The re-order in the Fixes commit below displaced vfio_pci_vga_init() as
the last failure point of what is now vfio_pci_core_register_device()
without introducing an unwind for the VGA arbiter registration.
In current kernels this is mostly benign because vfio_pci_set_decode()
only uses pci_dev state, but the original failure path could leave a
callback with a freed vdev cookie. The stale registration also becomes
unsafe again once the callback follows drvdata to the vfio device.
Add the required VGA unwind callout. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: hda/cs35l41: Fix firmware load work teardown
cs35l41_hda creates ALSA controls whose private data points at the
cs35l41_hda object. The firmware load control can also queue
fw_load_work.
Those controls are not removed on component unbind, and device remove
only cancels fw_load_work through cs35l41_remove_dsp(). That helper is
skipped when halo_initialized is false. With firmware_autostart
disabled, a firmware load can be requested before the DSP has been
initialized. If the component or device is removed before the queued
work runs, the worker can run after teardown and dereference driver
state that is no longer valid.
Track the created controls and remove them on unbind so no new control
callback can reach the driver data or queue more work. Then cancel
fw_load_work to drain any request that was already queued. Also cancel
the work unconditionally during device remove before runtime PM teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap002: fix runtime PM leak on read error
gp2ap002_read_raw() calls pm_runtime_get_sync() before reading the
lux value, but if gp2ap002_get_lux() fails, it returns directly. This
skips the pm_runtime_put_autosuspend() call at the "out" label,
permanently leaking a runtime PM reference and preventing the device
from autosuspending.
Replace the direct return with a "goto out" to ensure the reference
is properly dropped on the error path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: function: rndis: add length check for header
Add a length check for the rndis header in rndis_rm_hdr, to ensure that
MessageType, MessageLength, DataOffset, and DataLength fields are
present before they are accessed. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vce1: Fix VCE 1 firmware size and offsets
The VCPU BO contains the actual FW at an offset, but
it was not calculated into the VCPU BO size.
Subtract this from the FW size to make sure there is
no out of bounds access.
Make sure the stack and data offsets are aligned to
the 32K TLB size.
Check that the FW microcode actually fits in the
space that is reserved for it.
(cherry picked from commit c16fe59f622a080fc457a57b3e8f14c780699449) |
| An issue was discovered in Quest KACE Systems Deployment Appliance (SMA) 11.0.273. If a customer restricts access to the web console by IP address or subnets, the API endpoints are not restricted. If credentials/API keys are known to an attacker, the appliance can still be accessed via the API, leading to a potential compromise of the entire environment that is configured for KACE. |
| An issue was discovered in Quest KACE Systems Deployment Appliance (SMA) 11.0.273. It installs with default user credentials. The kbftp account has a password of getbxf, which is publicly known and documented. This allows remote attackers to trivially gain privileged access to the FTP service interface, which contains MySQL backups. Sensitive information is stored in the database, such as privileged credentials for other systems. |
| A race condition was addressed with improved locking. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. A remote user may be able to cause unexpected system termination or corrupt kernel memory. |
| A use after free issue was addressed with improved memory management. This issue is fixed in iOS 26.6 and iPadOS 26.6, macOS Sequoia 15.7.8, macOS Tahoe 26.6, tvOS 26.6, visionOS 26.6. An app may be able to cause unexpected system termination. |
| An issue was discovered in Quest KACE Systems Deployment Appliance (SMA) 11.0.273. It uses a hardcoded symmetric encryption key to encrypt secrets in the MySQL databases. (This key is not unique for each installation.) An attacker that gains access to the MySQL server or a backup files can decrypt the secrets. Often, the decrypted secrets can be used to escalate privileges within KACE, or gain privileged access to unrelated systems or services. |
| SQL injection vulnerability in Dede CMS v.5.7.118 allows a remote attacker to obtain sensitive information via the sqlquery parameter of the sys_sql_query.php component |
| A permissions issue was addressed with additional restrictions. This issue is fixed in iOS 26.6 and iPadOS 26.6, tvOS 26.6, visionOS 26.6, watchOS 26.6. An app may be able to read a persistent device identifier. |
