| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix response queue over-consumption in __qla_consume_iocb()
qla24xx_process_response_queue() advances ring_ptr past the head IOCB
before dispatching, so by the time __qla_consume_iocb() runs, ring_ptr
already points at the first continuation IOCB. The function however
looped purex->entry_count times starting at ring_ptr. As entry_count
includes the head, this consumed one entry too many: it stamped
RESPONSE_PROCESSED on the next, unrelated IOCB and advanced the ring
past it, silently dropping a legitimate firmware response. The head
IOCB's signature was also never marked.
Mark the head processed and account for it, then consume only the
entry_count - 1 continuation IOCBs, matching __qla_copy_purex_to_buffer(). |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: hibernate: mask DAIF before restoring hibernated kernel
The arm64 hibernate code manages the exception masking in an unsound
way, leading to potential crashes and/or warnings during resume.
When a hibernation image is saved in `swsusp_arch_suspend()`, all DAIF
exceptions are masked (by virtue of `local_daif_save()`), and the
suspended image is saved assuming that all DAIF exceptions will remain
masked when the image is restored.
When a hibernation image is resumed by `swsusp_arch_resume()`, only
interrupts are masked (by virtue of `local_irq_disable()` in
`resume_target_kernel()`). When pseudo-NMI is enabled the DAIF.IF bits
will be clear, and regardless of pseudo-NMI the DAIF.DA bits will be
clear.
This means that there are two problems:
(1) It is possible to take Debug, SError, or pseudo-NMI exceptions
during the resume process. This is unsafe, as during the resume
process both the old ane new kernels will tranisently be in an
inconsistent state, and swsusp_arch_suspend_exit() won't retain
an executable mapping of any exception vectors.
Any exception taken here will be fatal and silent.
(2) When re-entering the resumed kernel, some DAIF bits will be clear
unexpectedly. This permits Debug, SError, or pseudo-NMI exceptions
to be taken for a short period while the resumed kernel is not yet
in a consistent state.
This is detected by CONFIG_ARM64_DEBUG_PRIORITY_MASKING.
Avoid these issues by masking all DAIF exceptions during resume. |
| In the Linux kernel, the following vulnerability has been resolved:
staging: media: tegra-video: fix of_node_put() on VIP parse errors
tegra_vip_channel_of_parse() initializes np from dev->of_node without
taking a reference, but its error paths drop one through the
err_node_put label. This underflows the refcount of the VIP device's
OF node when endpoint parsing fails on a malformed device tree.
The only reference the function takes on np is the success-path
of_node_get() stored in vip->chan.of_node, and that one is already
released by the tegra_vip_init() error path and by tegra_vip_exit().
Return errors directly instead of jumping to the bogus cleanup label. |
| In the Linux kernel, the following vulnerability has been resolved:
gfs2: move quota_init qc iterator increment
Move qc++ from the loop body into the for-loop increment
expression in gfs2_quota_init().
This keeps iterator progression explicit and avoids mixing pointer
advance with duplicate-slot handling in the loop body. |
| In the Linux kernel, the following vulnerability has been resolved:
block: handle nogenerate/noverify properly in fs-integrity
Check the BIP_CHECK flags before generating or verifying PI information,
otherwise this can be incorrectly called for non-PI metadata and
cause generation of incorrect metadata and crashed in the verification
handler.
The new behavior matches that of the block layer auto-generated
metadata. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/irq: Fix missing r2 clobber in PCREL inline assembly
In CONFIG_PPC_KERNEL_PCREL mode, r2 is no longer reserved for the TOC
pointer and is available as a caller-saved register [0].
Both call_do_irq() and call_do_softirq() use inline assembly to call
functions with stack switching, but fail to list r2 in their clobber
lists. This causes the compiler to assume r2 is preserved across these
calls, leading to register corruption when the called functions
(__do_irq and __do_softirq) clobber r2.
As a result of this kernel crash during interrupt handling is seen and
the kernel fails to boot:
BUG: Unable to handle kernel data access on write at 0xc000000404697638
Faulting instruction address: 0xc0000000000181ec
Oops: Kernel access of bad area, sig: 11 [#1]
NIP [c0000000000181ec] __do_IRQ+0x6c/0xc0
With older GCC, the compiler would conservatively allocate
callee-saved registers (like r31) for values spanning function calls,
accidentally avoiding the bug:
<__do_IRQ>:
00 00 00 60 nop
a6 02 08 7c mflr r0
f8 ff e1 fb std r31,-8(r1)
f0 ff c1 fb std r30,-16(r1)
2d 03 10 06 pla r31,53297316
...
3d e8 ff 4b bl c0000000000165ac <__do_irq>
00 00 21 e8 ld r1,0(r1)
28 00 4d e9 ld r10,40(r13)
40 00 21 38 addi r1,r1,64
2a f9 aa 7f stdx r29,r10,r31
With newer GCC 14, the compiler uses r2 for such values, exposing the
missing clobber specification:
<__do_IRQ>:
00 00 00 60 nop
a6 02 08 7c mflr r0
f0 ff c1 fb std r30,-16(r1)
f8 ff e1 fb std r31,-8(r1)
29 02 10 06 pla r2,36252592 # c0000000022aadc0 <__irq_regs>
...
85 dc ff 4b bl c000000000015ee0 <__do_irq>
00 00 21 e8 ld r1,0(r1)
28 00 2d e9 ld r9,40(r13)
30 00 21 38 addi r1,r1,48
2a 11 c9 7f stdx r30,r9,r2
Fix this by adding r2 to the clobber list for both call_do_irq() and
call_do_softirq() when CONFIG_PPC_KERNEL_PCREL is enabled.
[0]: https://www.mail-archive.com/gcc-patches@gcc.gnu.org/msg313226.html |
| Wazuh is an open-source security platform providing unified XDR and SIEM protection for endpoints and cloud workloads. From 3.8.0 until 4.14.7, the _getattributes() function in src/os_xml/os_xml.c recursively processes every XML attribute without a depth limit while allocating two large local buffers in each stack frame. An enrolled agent can submit a Windows EventChannel event containing an element with enough attributes to exhaust the analysisd worker-thread stack, trigger a segmentation fault, and interrupt log ingestion. The element-depth limit in _ReadElem() does not constrain the number of attributes on one element, so it does not prevent this condition. This issue is fixed in version 4.14.7. |
| TREK is a collaborative travel planner. Prior to 3.3.0, the DELETE /api/trips/:tripId/collab/notes/:noteId/files/:fileId endpoint authorizes an authenticated user against the attacker-controlled tripId but deleteNoteFile in server/src/services/collabService.ts resolves the target only by note and file identifiers without requiring the file to belong to that trip. A user with edit access to any trip can submit identifiers belonging to another user's trip and permanently delete that note-file attachment. Sequential identifiers make broad targeting practical, while attachment read operations remain trip-scoped and are not affected. This issue is fixed in version 3.3.0. |
| In the Linux kernel, the following vulnerability has been resolved:
apparmor: policy_int make sure list heads are initialized before fail path
If profile create fails before policy_init is complete the list heads
are not properly initialized causing profile_free() sanity checks to
trigger the following splat.
AppArmor WARN aa_policy_destroy: (((!list_empty(&policy->profiles) && (&policy->profiles)->prev != ((void *) 0x122 + (0xdead000000000000UL))))):
WARNING: security/apparmor/lib.c:509 at aa_policy_destroy+0x164/0x1b0 security/apparmor/lib.c:509, CPU#0: syz.0.17/5541
Modules linked in:
CPU: 0 UID: 0 PID: 5541 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:aa_policy_destroy+0x16b/0x1b0 security/apparmor/lib.c:509
Code: 85 ed 7e 4d e8 96 bc 37 fd 5b 41 5c 41 5e 41 5f 5d e9 19 27 4e 07 cc e8 83 bc 37 fd 48 8d 3d 0c f0 d3 0b 48 c7 c6 a4 eb 38 8e <67> 48 0f b9 3a e9 04 ff ff ff e8 66 bc 37 fd 48 8d 3d ff ef d3 0b
RSP: 0018:ffffc9000345eaa0 EFLAGS: 00010293
RAX: ffffffff848f530d RBX: ffff88803f734800 RCX: ffff88801af2a580
RDX: 0000000000000000 RSI: ffffffff8e38eba4 RDI: ffffffff90634320
RBP: 0000000000000000 R08: 0000000000000cc0 R09: 00000000ffffffff
R10: dffffc0000000000 R11: fffffbfff1d95913 R12: dead000000000122
R13: ffff88803f734800 R14: ffff88803f734828 R15: dffffc0000000000
FS: 00007f5f6a1836c0(0000) GS:ffff88808c519000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055d02407b048 CR3: 0000000012aa9000 CR4: 0000000000352ef0
Call Trace:
<TASK>
aa_free_profile+0x9d/0x9f0 security/apparmor/policy.c:334
aa_alloc_profile+0x1e4/0x3e0 security/apparmor/policy.c:416
unpack_profile security/apparmor/policy_unpack.c:1153 [inline]
aa_unpack+0x17db/0x7430 security/apparmor/policy_unpack.c:1748
aa_replace_profiles+0x226/0x2a20 security/apparmor/policy.c:1183
policy_update+0x234/0x4a0 security/apparmor/apparmorfs.c:505
profile_load+0x1cb/0x320 security/apparmor/apparmorfs.c:522
vfs_write+0x296/0xba0 fs/read_write.c:685
ksys_write+0x150/0x270 fs/read_write.c:739
do_syscall_x64 arch/x86/entry/syscall_64.c:61 [inline]
do_syscall_64+0x166/0x520 arch/x86/entry/syscall_64.c:84
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7f5f6939e0d9
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 e8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007f5f6a183028 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 00007f5f69625fa0 RCX: 00007f5f6939e0d9
RDX: 0000000000000041 RSI: 0000200000000400 RDI: 0000000000000003
RBP: 00007f5f6a183090 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000001
R13: 00007f5f69626038 R14: 00007f5f69625fa0 R15: 00007ffe23725c18 |
| Docmost is open-source collaborative wiki and documentation software. From 0.70.0 until 0.80.1, a low-privileged authenticated user who can edit an exportable page can embed a forged attachmentId that belongs to a restricted page in the same space. Exporting the attacker-controlled page with includeAttachments=true causes the page export flow to read the restricted attachment from storage and include it in the returned ZIP archive even though direct file download denies access. This issue is fixed in version 0.80.1. |
| LaSuite Doc is a collaborative note taking, wiki and documentation platform. From 4.8.2 until 5.4.0, GET /api/v1.0/documents/search/ accepts sequential seven-digit document paths to scope descendant searches without requiring the caller to possess the public document UUID. An unauthenticated caller can submit an empty search query and iterate predictable path values to enumerate public document subtrees, obtaining document identifiers, titles, creator data, timestamps, and tree metadata. Each disclosed identifier can then be used through normal public-document endpoints to retrieve the document content, and differing 403 Forbidden and 404 Not Found responses reveal whether a guessed path exists. Authenticated users can similarly discover documents with authenticated link reach, while restricted documents remain protected. This issue is fixed in version 5.4.0. |
| Hatchet is a platform for orchestrating background tasks, AI agents, and durable workflows at scale. Prior to 0.106.1, the WorkerStatus gRPC polling path in pkg/repository/durable_events.go passes caller-supplied durable task, node, and branch identifiers to ListSatisfiedEntries without a tenant filter, allowing an authenticated tenant worker that knows another tenant's durable-task UUID to retrieve matching durable event-log records. The UUIDv4 requirement makes exploitation unlikely, and single-tenant deployments are unaffected in practice. This issue is fixed in version 0.106.1. |
| MaxKB is an open-source AI assistant for enterprise. In 2.10.2-lts and earlier, the /chat/api/mcp authentication path looks up an ApplicationApiKey using only its secret and active status, without enforcing the is_permanent and expire_time checks used by the standard chat API. A previously valid, non-permanent application key that remains active after expiration can initialize the MCP endpoint, list the published application's tool metadata, invoke tools/call, and create durable application_chat and application_chat_record state even though /chat/api/open rejects the same key. No fixed version is available as of this review. |
| InvenTree is an Open Source Inventory Management System. Prior to 1.4.0, ReportPrint at POST /api/report/print/ and LabelPrint at POST /api/report/label/print/ require authentication but do not call users.permissions.check_user_permission for the caller's per-model view role before selecting objects by primary key and rendering them with a chosen template. Because default templates exist for major business models and DataOutput stores the generated artifact for the requesting user, a role-less or unrelated-role account can enumerate object identifiers and download reports containing purchase, sales, part, bill-of-materials, stock, build, supplier, customer, pricing, and inventory data that the corresponding detail APIs would deny. This issue is fixed in version 1.4.0. |
| GoCD is a continuous deliver server. From 16.1.0 until 26.1.0, the internal material connection test APIs at /go/api/admin/internal/material_test and /go/api/internal/config_repos/*/material_test accept an arbitrary existing pipeline and pipeline-group context without sufficient validation. A pipeline group administrator can invoke Test Connection for source control materials outside the administrator's authorized pipeline group or configuration repository and potentially use credentials from those materials. For GoCD 20.6.0 and later, the test context can also resolve external secrets managed by secret-management plugins, including global reusable secrets with separate permissions. This issue is fixed in version 26.1.0. |
| Tautulli is a Python based monitoring and tracking tool for Plex Media Server. Prior to 2.17.2, the unauthenticated /auth/redirect endpoint in plexpy/webauth.py removes forward slashes from the user-controlled redirect_uri parameter but leaves tab, line-feed, and carriage-return characters intact. With the default root HTTP_ROOT configuration, CherryPy HTTPRedirect passes the resulting value to urllib.parse.urljoin, which can resolve the whitespace-bearing path to an attacker-controlled external origin. A user who follows a crafted link can therefore be redirected outside Tautulli for phishing or post-login redirect-flow abuse, while custom non-root HTTP_ROOT configurations are not affected by this bypass. This issue is fixed in version 2.17.2. |
| SysReptor is a fully customizable pentest reporting platform. Prior to 2026.68, an unauthenticated attacker who holds a public read-write note share link can disclose an uploaded file or image from the same project by updating the shared note to reference the target asset filename. The user-controlled reference causes the shared-note authorization logic to treat the asset as permitted, after which the attacker can download it. The attacker must know the asset filename, and the issue does not permit cross-project access. This issue is fixed in version 2026.68. |
| LubeLogger is a self-hosted, open-source, web-based vehicle maintenance and fuel mileage tracker. Prior to 1.6.8, an authenticated user could submit caller-controlled recordIds to the DuplicateRecordsToOtherVehicles endpoint while naming destination vehicleIds the user could edit. The endpoint authorized the destination vehicles but fetched source records in Controllers/VehicleController.cs without checking UserCanEditVehicle for each existingRecord.VehicleId. This missing source-vehicle authorization allowed service, collision, upgrade, fuel, tax, supply, note, odometer, reminder, plan, inspection, and equipment records belonging to another user to be copied into an attacker-controlled vehicle, exposing record contents and attachment paths and creating persistent copies. This issue is fixed in version 1.6.8. |
| Obsidian Web MCP is a secure remote MCP server for Obsidian vaults. Prior to 0.2.0, /oauth/authorize issues an authorization code without a login, consent, or session check, and /oauth/token can exchange that code for the static VAULT_MCP_TOKEN without authenticating a client. An unauthenticated remote caller who can reach the intended tunnel deployment can therefore call /mcp and use vault_read, vault_write, vault_search, vault_list, vault_move, and vault_delete against the entire vault. Optional PKCE does not prevent an attacker-initiated flow, and unauthenticated /oauth/register also exposes a client_credentials path by returning the configured VAULT_OAUTH_CLIENT_SECRET. This issue is fixed in version 0.2.0. |
| mport is the MidnightBSD Package Manager. Prior to 2.7.8, the audit command in mport/mport.c computed option-adjusted local_argv and local_argc values but passed the original argument entry to audit_package(). When an operator or automation used an option such as -r before a package name, stale optind state and the unadjusted argument could cause mport to audit the option token instead of the requested package, producing a false-negative or useless result that could leave a vulnerable package unidentified. The corrected parsing resets optind and optreset before using the adjusted local arguments. This issue is fixed in version 2.7.8. |
