| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
clk: sunxi-ng: mp: Fix dual-divider clock rate readback
When dual-divider clock support was introduced, the P divider offset was
left out of the .recalc_rate readback function. This causes the clock
rate to become bogus or even zero (possibly due to the P divider being
1, leading to a divide-by-zero).
Fix this by incorporating the P divider offset into the calculation. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: Clear tcp_sk(sk)->fastopen_rsk in tcp_disconnect().
syzbot reported the splat below where a socket had tcp_sk(sk)->fastopen_rsk
in the TCP_ESTABLISHED state. [0]
syzbot reused the server-side TCP Fast Open socket as a new client before
the TFO socket completes 3WHS:
1. accept()
2. connect(AF_UNSPEC)
3. connect() to another destination
As of accept(), sk->sk_state is TCP_SYN_RECV, and tcp_disconnect() changes
it to TCP_CLOSE and makes connect() possible, which restarts timers.
Since tcp_disconnect() forgot to clear tcp_sk(sk)->fastopen_rsk, the
retransmit timer triggered the warning and the intended packet was not
retransmitted.
Let's call reqsk_fastopen_remove() in tcp_disconnect().
[0]:
WARNING: CPU: 2 PID: 0 at net/ipv4/tcp_timer.c:542 tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7))
Modules linked in:
CPU: 2 UID: 0 PID: 0 Comm: swapper/2 Not tainted 6.17.0-rc5-g201825fb4278 #62 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:tcp_retransmit_timer (net/ipv4/tcp_timer.c:542 (discriminator 7))
Code: 41 55 41 54 55 53 48 8b af b8 08 00 00 48 89 fb 48 85 ed 0f 84 55 01 00 00 0f b6 47 12 3c 03 74 0c 0f b6 47 12 3c 04 74 04 90 <0f> 0b 90 48 8b 85 c0 00 00 00 48 89 ef 48 8b 40 30 e8 6a 4f 06 3e
RSP: 0018:ffffc900002f8d40 EFLAGS: 00010293
RAX: 0000000000000002 RBX: ffff888106911400 RCX: 0000000000000017
RDX: 0000000002517619 RSI: ffffffff83764080 RDI: ffff888106911400
RBP: ffff888106d5c000 R08: 0000000000000001 R09: ffffc900002f8de8
R10: 00000000000000c2 R11: ffffc900002f8ff8 R12: ffff888106911540
R13: ffff888106911480 R14: ffff888106911840 R15: ffffc900002f8de0
FS: 0000000000000000(0000) GS:ffff88907b768000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8044d69d90 CR3: 0000000002c30003 CR4: 0000000000370ef0
Call Trace:
<IRQ>
tcp_write_timer (net/ipv4/tcp_timer.c:738)
call_timer_fn (kernel/time/timer.c:1747)
__run_timers (kernel/time/timer.c:1799 kernel/time/timer.c:2372)
timer_expire_remote (kernel/time/timer.c:2385 kernel/time/timer.c:2376 kernel/time/timer.c:2135)
tmigr_handle_remote_up (kernel/time/timer_migration.c:944 kernel/time/timer_migration.c:1035)
__walk_groups.isra.0 (kernel/time/timer_migration.c:533 (discriminator 1))
tmigr_handle_remote (kernel/time/timer_migration.c:1096)
handle_softirqs (./arch/x86/include/asm/jump_label.h:36 ./include/trace/events/irq.h:142 kernel/softirq.c:580)
irq_exit_rcu (kernel/softirq.c:614 kernel/softirq.c:453 kernel/softirq.c:680 kernel/softirq.c:696)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1050 (discriminator 35) arch/x86/kernel/apic/apic.c:1050 (discriminator 35))
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
igc: don't fail igc_probe() on LED setup error
When igc_led_setup() fails, igc_probe() fails and triggers kernel panic
in free_netdev() since unregister_netdev() is not called. [1]
This behavior can be tested using fault-injection framework, especially
the failslab feature. [2]
Since LED support is not mandatory, treat LED setup failures as
non-fatal and continue probe with a warning message, consequently
avoiding the kernel panic.
[1]
kernel BUG at net/core/dev.c:12047!
Oops: invalid opcode: 0000 [#1] SMP NOPTI
CPU: 0 UID: 0 PID: 937 Comm: repro-igc-led-e Not tainted 6.17.0-rc4-enjuk-tnguy-00865-gc4940196ab02 #64 PREEMPT(voluntary)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:free_netdev+0x278/0x2b0
[...]
Call Trace:
<TASK>
igc_probe+0x370/0x910
local_pci_probe+0x3a/0x80
pci_device_probe+0xd1/0x200
[...]
[2]
#!/bin/bash -ex
FAILSLAB_PATH=/sys/kernel/debug/failslab/
DEVICE=0000:00:05.0
START_ADDR=$(grep " igc_led_setup" /proc/kallsyms \
| awk '{printf("0x%s", $1)}')
END_ADDR=$(printf "0x%x" $((START_ADDR + 0x100)))
echo $START_ADDR > $FAILSLAB_PATH/require-start
echo $END_ADDR > $FAILSLAB_PATH/require-end
echo 1 > $FAILSLAB_PATH/times
echo 100 > $FAILSLAB_PATH/probability
echo N > $FAILSLAB_PATH/ignore-gfp-wait
echo $DEVICE > /sys/bus/pci/drivers/igc/bind |
| In Apache Airflow versions before 3.1.6, the proxies and proxy fields within a Connection may include proxy URLs containing embedded authentication information. These fields were not treated as sensitive by default and therefore were not automatically masked in log output. As a result, when such connections are rendered or printed to logs, proxy credentials embedded in these fields could be exposed.
Users are recommended to upgrade to 3.1.6 or later, which fixes this issue |
| An issue was discovered in bridgetech probes VB220 IP Network Probe,VB120 Embedded IP + RF Probe, VB330 High-Capacity Probe, VB440 ST 2110 Production Analytics Probe, and NOMAD, firmware versions 6.5.0-9, allowing attackers to gain sensitive information such as administrator passwords via the /probe/core/setup/passwd endpoint. NOTE: the Supplier disagrees that 6.5.0-9 is affected, and instead reports that 5.6.0-3 and earlier are affected, and 5.6.0-4 (2020-09-21) and later are fixed. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: increase scan_ies_len for S1G
Currently the S1G capability element is not taken into account
for the scan_ies_len, which leads to a buffer length validation
failure in ieee80211_prep_hw_scan() and subsequent WARN in
__ieee80211_start_scan(). This prevents hw scanning from functioning.
To fix ensure we accommodate for the S1G capability length. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/s390: Make attach succeed when the device was surprise removed
When a PCI device is removed with surprise hotplug, there may still be
attempts to attach the device to the default domain as part of tear down
via (__iommu_release_dma_ownership()), or because the removal happens
during probe (__iommu_probe_device()). In both cases zpci_register_ioat()
fails with a cc value indicating that the device handle is invalid. This
is because the device is no longer part of the instance as far as the
hypervisor is concerned.
Currently this leads to an error return and s390_iommu_attach_device()
fails. This triggers the WARN_ON() in __iommu_group_set_domain_nofail()
because attaching to the default domain must never fail.
With the device fenced by the hypervisor no DMAs to or from memory are
possible and the IOMMU translations have no effect. Proceed as if the
registration was successful and let the hotplug event handling clean up
the device.
This is similar to how devices in the error state are handled since
commit 59bbf596791b ("iommu/s390: Make attach succeed even if the device
is in error state") except that for removal the domain will not be
registered later. This approach was also previously discussed at the
link.
Handle both cases, error state and removal, in a helper which checks if
the error needs to be propagated or ignored. Avoid magic number
condition codes by using the pre-existing, but never used, defines for
PCI load/store condition codes and rename them to reflect that they
apply to all PCI instructions. |
| BentoML is a Python library for building online serving systems optimized for AI apps and model inference. Prior to version 1.4.34, BentoML's `bentofile.yaml` configuration allows path traversal attacks through multiple file path fields (`description`, `docker.setup_script`, `docker.dockerfile_template`, `conda.environment_yml`). An attacker can craft a malicious bentofile that, when built by a victim, exfiltrates arbitrary files from the filesystem into the bento archive. This enables supply chain attacks where sensitive files (SSH keys, credentials, environment variables) are silently embedded in bentos and exposed when pushed to registries or deployed. Version 1.4.34 contains a patch for the issue. |
| LavaLite CMS versions up to and including 10.1.0 contain a stored cross-site scripting vulnerability in the package creation and search functionality. Authenticated users can supply crafted HTML or JavaScript in the package Name or Description fields that is stored and later rendered without proper output encoding in package search results. When other users view search results that include the malicious package, the injected script executes in their browsers, potentially enabling session hijacking, credential theft, and unauthorized actions in the context of the victim. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: amd: acp: Fix incorrect retrival of acp_chip_info
Use dev_get_drvdata(dev->parent) instead of dev_get_platdata(dev)
to correctly obtain acp_chip_info members in the acp I2S driver.
Previously, some members were not updated properly due to incorrect
data access, which could potentially lead to null pointer
dereferences.
This issue was missed in the earlier commit
("ASoC: amd: acp: Fix NULL pointer deref in acp_i2s_set_tdm_slot"),
which only addressed set_tdm_slot(). This change ensures that all
relevant functions correctly retrieve acp_chip_info, preventing
further null pointer dereference issues. |
| School Management System PHP v1.0 is vulnerable to Cross Site Scripting (XSS) in /login.php via the password parameter. |
| A cross-site scripting (XSS) vulnerability exists in the administrative interface of ultimatefosters UltimatePOS 4.8 where input submitted in the purchase functionality is reflected without proper escaping in the admin log panel page in the 'reference No.' field. This flaw allows an authenticated attacker to execute arbitrary JavaScript in the context of an administrator's browser session, which could lead to session hijacking or other malicious actions. |
| code-projects Mobile Shop Management System 1.0 is vulnerable to File Upload in /ExAddProduct.php. |
| code-projects Computer Book Store 1.0 is vulnerable to File Upload in admin_add.php. |
| Movary is a web application to track, rate and explore your movie watch history. Due to insufficient input validation, attackers can trigger cross-site scripting payloads in versions prior to 0.70.0. The vulnerable parameter is `?categoryUpdated=`. Version 0.70.0 fixes the issue. |
| Movary is a web application to track, rate and explore your movie watch history. Due to insufficient input validation, attackers can trigger cross-site scripting payloads in versions prior to 0.70.0. The vulnerable parameter is `?categoryDeleted=`. Version 0.70.0 fixes the issue. |
| The product does not implement sufficient measures to prevent multiple failed authentication attempts within a short time frame, making it susceptible to brute-force attacks. |
| File Browser provides a file managing interface within a specified directory and it can be used to upload, delete, preview, rename and edit files. Versions prior to 2.45.1 have an Insecure Direct Object Reference (IDOR) vulnerability in the FileBrowser application's share deletion functionality. This vulnerability allows any authenticated user with share permissions to delete other users' shared links without authorization checks. The impact is significant as malicious actors can disrupt business operations by systematically removing shared files and links. This leads to denial of service for legitimate users, potential data loss in collaborative environments, and breach of data confidentiality agreements. In organizational settings, this could affect critical file sharing for projects, presentations, or document collaboration. Version 2.45.1 contains a fix for the issue. |
| Due to missing authorization of an API endpoint, unauthorized users can send HTTP GET
requests to gather sensitive information. An attacker could also send HTTP POST requests to modify
the log files’ root path as well as the TCP ports the service is running on, leading to a Denial of Service
attack. |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: acpi: initialize acpi_gpio_info struct
Since commit 7c010d463372 ("gpiolib: acpi: Make sure we fill struct
acpi_gpio_info"), uninitialized acpi_gpio_info struct are passed to
__acpi_find_gpio() and later in the call stack info->quirks is used in
acpi_populate_gpio_lookup. This breaks the i2c_hid_cpi driver:
[ 58.122916] i2c_hid_acpi i2c-UNIW0001:00: HID over i2c has not been provided an Int IRQ
[ 58.123097] i2c_hid_acpi i2c-UNIW0001:00: probe with driver i2c_hid_acpi failed with error -22
Fix this by initializing the acpi_gpio_info pass to __acpi_find_gpio() |
