| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in libndp. This flaw allows a local malicious user to cause a buffer overflow in NetworkManager, triggered by sending a malformed IPv6 router advertisement packet. This issue occurred as libndp was not correctly validating the route length information. |
| An out-of-bounds write flaw was found in mpg123 when handling crafted streams. When decoding PCM, the libmpg123 may write past the end of a heap-located buffer. Consequently, heap corruption may happen, and arbitrary code execution is not discarded. The complexity required to exploit this flaw is considered high as the payload must be validated by the MPEG decoder and the PCM synth before execution. Additionally, to successfully execute the attack, the user must scan through the stream, making web live stream content (such as web radios) a very unlikely attack vector. |
| A flaw was found in FreeIPA. This issue may allow a remote attacker to craft a HTTP request with parameters that can be interpreted as command arguments to kinit on the FreeIPA server, which can lead to a denial of service. |
| Client queries that trigger serving stale data and that also require lookups in local authoritative zone data may result in an assertion failure.
This issue affects BIND 9 versions 9.16.13 through 9.16.50, 9.18.0 through 9.18.27, 9.19.0 through 9.19.24, 9.11.33-S1 through 9.11.37-S1, 9.16.13-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.27-S1. |
| In MIT Kerberos 5 (aka krb5) before 1.22 (with incremental propagation), there is an integer overflow for a large update size to resize() in kdb_log.c. An authenticated attacker can cause an out-of-bounds write and kadmind daemon crash. |
| It is possible to construct a zone such that some queries to it will generate responses containing numerous records in the Additional section. An attacker sending many such queries can cause either the authoritative server itself or an independent resolver to use disproportionate resources processing the queries. Zones will usually need to have been deliberately crafted to attack this exposure.
This issue affects BIND 9 versions 9.11.0 through 9.11.37, 9.16.0 through 9.16.50, 9.18.0 through 9.18.32, 9.20.0 through 9.20.4, 9.21.0 through 9.21.3, 9.11.3-S1 through 9.11.37-S1, 9.16.8-S1 through 9.16.50-S1, and 9.18.11-S1 through 9.18.32-S1. |
| A race condition vulnerability was discovered in how signals are handled by OpenSSH's server (sshd). If a remote attacker does not authenticate within a set time period, then sshd's SIGALRM handler is called asynchronously. However, this signal handler calls various functions that are not async-signal-safe, for example, syslog(). As a consequence of a successful attack, in the worst case scenario, an attacker may be able to perform a remote code execution (RCE) as an unprivileged user running the sshd server. |
| A flaw was found in the integration of Active Directory and the System Security Services Daemon (SSSD) on Linux systems. In default configurations, the Kerberos local authentication plugin (sssd_krb5_localauth_plugin) is enabled, but a fallback to the an2ln plugin is possible. This fallback allows an attacker with permission to modify certain AD attributes (such as userPrincipalName or samAccountName) to impersonate privileged users, potentially resulting in unauthorized access or privilege escalation on domain-joined Linux hosts. |
| Calling Decoder.Decode on a message which contains deeply nested structures can cause a panic due to stack exhaustion. This is a follow-up to CVE-2022-30635. |
| Kea configuration and API directives can be used to overwrite arbitrary files, subject to permissions granted to Kea. Many common configurations run Kea as root, leave the API entry points unsecured by default, and/or place the control sockets in insecure paths.
This issue affects Kea versions 2.4.0 through 2.4.1, 2.6.0 through 2.6.2, and 2.7.0 through 2.7.8. |
| Issue summary: Calling the OpenSSL API function SSL_free_buffers may cause
memory to be accessed that was previously freed in some situations
Impact summary: A use after free can have a range of potential consequences such
as the corruption of valid data, crashes or execution of arbitrary code.
However, only applications that directly call the SSL_free_buffers function are
affected by this issue. Applications that do not call this function are not
vulnerable. Our investigations indicate that this function is rarely used by
applications.
The SSL_free_buffers function is used to free the internal OpenSSL buffer used
when processing an incoming record from the network. The call is only expected
to succeed if the buffer is not currently in use. However, two scenarios have
been identified where the buffer is freed even when still in use.
The first scenario occurs where a record header has been received from the
network and processed by OpenSSL, but the full record body has not yet arrived.
In this case calling SSL_free_buffers will succeed even though a record has only
been partially processed and the buffer is still in use.
The second scenario occurs where a full record containing application data has
been received and processed by OpenSSL but the application has only read part of
this data. Again a call to SSL_free_buffers will succeed even though the buffer
is still in use.
While these scenarios could occur accidentally during normal operation a
malicious attacker could attempt to engineer a stituation where this occurs.
We are not aware of this issue being actively exploited.
The FIPS modules in 3.3, 3.2, 3.1 and 3.0 are not affected by this issue. |
| Git LFS is a Git extension for versioning large files. When Git LFS requests credentials from Git for a remote host, it passes portions of the host's URL to the `git-credential(1)` command without checking for embedded line-ending control characters, and then sends any credentials it receives back from the Git credential helper to the remote host. By inserting URL-encoded control characters such as line feed (LF) or carriage return (CR) characters into the URL, an attacker may be able to retrieve a user's Git credentials. This problem exists in all previous versions and is patched in v3.6.1. All users should upgrade to v3.6.1. There are no workarounds known at this time. |
| There is a HIGH severity vulnerability affecting the CPython "zipfile"
module affecting "zipfile.Path". Note that the more common API "zipfile.ZipFile" class is unaffected.
When iterating over names of entries in a zip archive (for example, methods
of "zipfile.Path" like "namelist()", "iterdir()", etc)
the process can be put into an infinite loop with a maliciously crafted
zip archive. This defect applies when reading only metadata or extracting
the contents of the zip archive. Programs that are not handling
user-controlled zip archives are not affected. |
| A Server-Side Request Forgery (SSRF) vulnerability exists in the MediaConnector class within the vLLM project's multimodal feature set. The load_from_url and load_from_url_async methods fetch and process media from user-provided URLs without adequate restrictions on the target hosts. This allows an attacker to coerce the vLLM server into making arbitrary requests to internal network resources. |
| A flaw was found in the X.org server. Due to improperly tracked allocation size in _XkbSetCompatMap, a local attacker may be able to trigger a buffer overflow condition via a specially crafted payload, leading to denial of service or local privilege escalation in distributions where the X.org server is run with root privileges. |
| Go JOSE provides an implementation of the Javascript Object Signing and Encryption set of standards in Go, including support for JSON Web Encryption (JWE), JSON Web Signature (JWS), and JSON Web Token (JWT) standards. In versions on the 4.x branch prior to version 4.0.5, when parsing compact JWS or JWE input, Go JOSE could use excessive memory. The code used strings.Split(token, ".") to split JWT tokens, which is vulnerable to excessive memory consumption when processing maliciously crafted tokens with a large number of `.` characters. An attacker could exploit this by sending numerous malformed tokens, leading to memory exhaustion and a Denial of Service. Version 4.0.5 fixes this issue. As a workaround, applications could pre-validate that payloads passed to Go JOSE do not contain an excessive number of `.` characters. |
| Due to the usage of a variable time instruction in the assembly implementation of an internal function, a small number of bits of secret scalars are leaked on the ppc64le architecture. Due to the way this function is used, we do not believe this leakage is enough to allow recovery of the private key when P-256 is used in any well known protocols. |
| Starting in Python 3.12.0, the asyncio._SelectorSocketTransport.writelines()
method would not "pause" writing and signal to the Protocol to drain
the buffer to the wire once the write buffer reached the "high-water
mark". Because of this, Protocols would not periodically drain the write
buffer potentially leading to memory exhaustion.
This
vulnerability likely impacts a small number of users, you must be using
Python 3.12.0 or later, on macOS or Linux, using the asyncio module
with protocols, and using .writelines() method which had new
zero-copy-on-write behavior in Python 3.12.0 and later. If not all of
these factors are true then your usage of Python is unaffected. |
| c-ares is an asynchronous resolver library. From 1.32.3 through 1.34.4, there is a use-after-free in read_answers() when process_answer() may re-enqueue a query either due to a DNS Cookie Failure or when the upstream server does not properly support EDNS, or possibly on TCP queries if the remote closed the connection immediately after a response. If there was an issue trying to put that new transaction on the wire, it would close the connection handle, but read_answers() was still expecting the connection handle to be available to possibly dequeue other responses. In theory a remote attacker might be able to trigger this by flooding the target with ICMP UNREACHABLE packets if they also control the upstream nameserver and can return a result with one of those conditions, this has been untested. Otherwise only a local attacker might be able to change system behavior to make send()/write() return a failure condition. This vulnerability is fixed in 1.34.5. |
| In Node.js, the `ReadFileUtf8` internal binding leaks memory due to a corrupted pointer in `uv_fs_s.file`: a UTF-16 path buffer is allocated but subsequently overwritten when the file descriptor is set. This results in an unrecoverable memory leak on every call. Repeated use can cause unbounded memory growth, leading to a denial of service.
Impact:
* This vulnerability affects APIs relying on `ReadFileUtf8` on Node.js release lines: v20 and v22. |
