| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| NLnet Labs Unbound 1.19.1 up to and including version 1.25.0 has a vulnerability in the DNSSEC validator that enables denial of service and possible remote code execution as a result of deep copying a data structure and erroneously overwriting a destination pointer. An adversary can exploit the vulnerability by controlling a malicious signed zone and querying a vulnerable Unbound. When DS sub-queries need to suspend validation due to NSEC3 computational budget exhaustion (introduced in Unbound 1.19.1), Unbound deep-copies response messages to preserve them across memory region teardown. A struct-assignment bug overwrites the destination's pointer with the source's pointer. After the sub-query region is freed, the resumed validator dereferences this dangling pointer, triggering a crash or potentially enabling arbitrary code execution. Unbound 1.25.1 contains a patch with a fix to preserve the correct pointer when deep copying the data structure. |
| NLnet Labs Unbound 1.6.2 up to and including version 1.25.0 has a denial of service vulnerability when compiled with DNSCrypt support ('--enable-dnscrypt'). A bad DNSCrypt query could underflow Unbound's DNSCrypt packet reading procedure that may lead to heap overflow. A malicious actor can exploit the vulnerability with a single bad DNSCrypt query that its decrypted plaintext consists entirely of '0x00' bytes and does not contain the expected '0x80' marker. Unbound would then start reading more bytes than necessary until it finds a non-'0x00' byte. Based on the underlying memory allocator and the memory layout, it could lead to heap overflow while reading followed by a crash. Likelihood of a crash is low, since it relies heavily on the underlying memory allocator and the memory layout. If the heap overflow does not happen, Unbound's later packet checks will deny the packet. Unbound 1.25.1 contains a patch with a fix to bound reading in the given buffer space. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| Werkzeug is a comprehensive WSGI web application library. In versions on the 3.x branch prior to 3.0.1 and on the 2.x branch prior to 2.3.8, if an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. This vulnerability has been patched in version 3.0.1 and 2.3.8. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: drop logically empty buckets in mtype_del
mtype_del() counts empty slots below n->pos in k, but it only drops the
bucket when both n->pos and k are zero. This misses buckets whose live
entries have all been removed while n->pos still points past deleted slots.
Treat a bucket as empty when all positions below n->pos are unused and
release it directly instead of shrinking it further. |
| The Decent Comments WordPress plugin before 3.0.2 does not restrict access to comment author email addresses and post author email addresses via its REST API endpoint, allowing unauthenticated attackers to enumerate registered user email addresses. |
| NVIDIA BioNeMo Core for Linux contains a vulnerability where a user could cause a path traversal by loading a malicious file. A successful exploit of this vulnerability might lead to code execution, denial of service, information disclosure, and data tampering. |
| A flaw was found in Cockpit. This vulnerability allows a remote attacker to achieve arbitrary command execution on the host by exploiting unsanitized user-controlled parameters within crafted links in the system logs user interface (UI). An attacker can inject shell metacharacters and command substitutions into these parameters, leading to the execution of arbitrary shell commands on the affected system. This could result in a complete system compromise. |
| Trilium Notes is a cross-platform, hierarchical note taking application focused on building large personal knowledge bases. Versions 0.102.1 and prior contain a critical security flaw where lack of SVG sanitization combined with a disabled Content Security Policy (CSP) and a publicly reachable backend execution API results in an unauthenticated Remote Code Execution (RCE). The vulnerability arises from an insecure-by-design architecture: Trilium serves SVG attachments with the image/svg+xml MIME type without any sanitization, and it explicitly disables Helmet's Content Security Policy middleware, removing the primary defense against script execution in served assets. Because the malicious SVG runs under the Same-Origin Policy, it can issue a fetch('/') to extract the csrfToken from the document body. With that token, it can send a signed request to /api/script/exec to execute arbitrary Node.js code on the server. An attacker can compromise the entire server instance simply by tricking an authenticated user into viewing a shared SVG attachment. The issue has been fixed in version 0.102.2. |
| A vulnerability was identified in the ShadowAttribute proposal creation workflow. The add action accepted user-controlled ShadowAttribute request data without removing the id field before saving the record. Because the underlying framework treats a supplied primary key as an instruction to update an existing record, an authenticated user able to submit shadow attribute proposals could provide the identifier of an existing ShadowAttribute and cause that record to be updated instead of creating a new proposal.
This can result in unauthorized modification of existing shadow attributes, potentially affecting proposals associated with events the user should not be able to alter. Depending on deployment configuration and accessible API responses, the issue may also expose or move proposal data across event contexts.
The vulnerability is caused by trusting a client-supplied primary key during object creation. The fix removes the id field from incoming ShadowAttribute data before processing, ensuring that the endpoint always creates a new proposal rather than updating an existing one. This has been fixed in MISP 2.5.38. |
| The CSP report endpoint intended to limit logged CSP reports to 1 KB but incorrectly allowed reports up to 1 MB before truncation. On deployments where the endpoint is reachable by untrusted clients, this could allow attackers to generate excessive log volume and contribute to resource exhaustion or log flooding. |
| NVIDIA BioNemo for Linux contains a vulnerability where a user could cause a deserialization of untrusted data. A successful exploit of this vulnerability might lead to code execution, denial of service, information disclosure, and data tampering. |
| ArcGIS Server contains an improper authentication vulnerability in an undocumented administrative endpoint. An unauthenticated attacker could exploit this issue by sending a crafted request to the endpoint. Successful exploitation may result in disruption of the web-based browsing interface. This issue affects ArcGIS Server 12.0 and earlier. |
| ArcGIS Server contains an input validation weakness in the login redirection workflow. An Authenticated attacker could exploit this issue by sending a specially crafted request, Successful exploitation may result in the application redirecting the browser to an unintended, untrusted site, resulting in a limited confidentiality impact under specific user interaction conditions.
The vulnerability affects only the client side navigation logic during authentication and remains confined to the same security boundary. No server side compromise or cross component impact is possible. This issue affects ArcGIS Server 11.5. |
| CryptPad is an end-to-end encrypted collaborative office suite. In versions prior to 2026.2.0, the HTML sanitizer in Diffmarked.js can be bypassed due to incomplete attribute filtering on restricted tags. The sanitizer validates only the src attribute of <iframe>, <video>, and <audio> elements, leaving all other attributes unchecked. As a result, an attacker can inject arbitrary HTML through srcdoc, completely defeating CryptPad's intended bounce sandboxing and enabling link injection or other interactive content within user-controlled documents. The root cause lies in how the sanitizer classifies and enforces tag restrictions: although it defines both forbidden and restricted tag lists, <iframe> is treated as "restricted" rather than "forbidden." Enforcement then inspects only the src attribute, so pairing a benign blob: src with a malicious srcdoc results in unrestricted rendering. This issue has been fixed in version 2026.2.0. |
| In the Linux kernel, the following vulnerability has been resolved:
ptrace: slightly saner 'get_dumpable()' logic
The 'dumpability' of a task is fundamentally about the memory image of
the task - the concept comes from whether it can core dump or not - and
makes no sense when you don't have an associated mm.
And almost all users do in fact use it only for the case where the task
has a mm pointer.
But we have one odd special case: ptrace_may_access() uses 'dumpable' to
check various other things entirely independently of the MM (typically
explicitly using flags like PTRACE_MODE_READ_FSCREDS). Including for
threads that no longer have a VM (and maybe never did, like most kernel
threads).
It's not what this flag was designed for, but it is what it is.
The ptrace code does check that the uid/gid matches, so you do have to
be uid-0 to see kernel thread details, but this means that the
traditional "drop capabilities" model doesn't make any difference for
this all.
Make it all make a *bit* more sense by saying that if you don't have a
MM pointer, we'll use a cached "last dumpability" flag if the thread
ever had a MM (it will be zero for kernel threads since it is never
set), and require a proper CAP_SYS_PTRACE capability to override. |
| In the Linux kernel, the following vulnerability has been resolved:
audit: add fchmodat2() to change attributes class
fchmodat2(), introduced in version 6.6 is currently not in the change
attribute class of audit. Calling fchmodat2() to change a file
attribute in the same fashion than chmod() or fchmodat() will bypass
audit rules such as:
-w /tmp/test -p rwa -k test_rwa
The current patch adds fchmodat2() to the change attributes class. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: ntfs3: fix infinite loop in attr_load_runs_range on inconsistent metadata
We found an infinite loop bug in the ntfs3 file system that can lead to a
Denial-of-Service (DoS) condition.
A malformed NTFS image can cause an infinite loop when an attribute header
indicates an empty run list, while directory entries reference it as
containing actual data. In NTFS, setting evcn=-1 with svcn=0 is a valid way
to represent an empty run list, and run_unpack() correctly handles this by
checking if evcn + 1 equals svcn and returning early without parsing any run
data. However, this creates a problem when there is metadata inconsistency,
where the attribute header claims to be empty (evcn=-1) but the caller
expects to read actual data. When run_unpack() immediately returns success
upon seeing this condition, it leaves the runs_tree uninitialized with
run->runs as a NULL. The calling function attr_load_runs_range() assumes
that a successful return means that the runs were loaded and sets clen to 0,
expecting the next run_lookup_entry() call to succeed. Because runs_tree
remains uninitialized, run_lookup_entry() continues to fail, and the loop
increments vcn by zero (vcn += 0), leading to an infinite loop.
This patch adds a retry counter to detect when run_lookup_entry() fails
consecutively after attr_load_runs_vcn(). If the run is still not found on
the second attempt, it indicates corrupted metadata and returns -EINVAL,
preventing the Denial-of-Service (DoS) vulnerability. |
| NVIDIA TRT-LLM for any platform contains a vulnerability in RPC testing, where an attacker could cause an unsafe deserialization. A successful exploit of this vulnerability might lead to code execution, denial of service, data tampering, and information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
net/x25: Fix overflow when accumulating packets
Add a check to ensure that `x25_sock.fraglen` does not overflow.
The `fraglen` also needs to be resetted when purging `fragment_queue` in
`x25_clear_queues()`. |
