| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| LDAP filter injection in Zimbra Collaboration Suite 10.1.0 through 10.1.21 allows unauthenticated attackers to alter external LDAP search filters. On domains using search-filter authentication and lazy provisioning, this creates a password oracle for external directory users. Authenticated S/MIME lookups can also return certificates and identity data for unintended directory entries. |
| An authentication rate-limit bypass in Zimbra Collaboration Suite 10.1.0 through 10.1.21 allows unauthenticated attackers to make repeated password guesses through GraphQL without incrementing Zimbra’s source-IP failure counter. GraphQL aliases allow multiple authentication attempts in one HTTP request. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: zero gaps in read-gaps folio to avoid writing back stale data
netfs_read_gaps() leaves gaps around a streaming write's dirty region
unread on the server side, so a short/EOF response there left stale
folio content that later got written back.
Zero it after the read completes, not before: netfs_wait_for_read()
returns rreq->transferred once ret >= 0, so build an iterator over the
same bvec array the read used, advance past ret, and zero the rest.
The dirty region already maps to sink pages in that array rather than
the real folio, so this can't touch it, and only the actual shortfall
gets zeroed instead of the whole gap upfront. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: line6: reject oversized playback packets
Each playback URB is handed a slice of out.buffer that is exactly
LINE6_ISO_PACKETS * max_packet_size_out bytes, sized from the OUT
endpoint, but the number of bytes written into that slice is never
compared against it.
submit_audio_out_urb() takes the frame count from prev_fsize, which
audio_in_callback() derived from the *IN* endpoint's received packet
length, and rescales it with the playback frame size; when prev_fsize is
still zero it synthesizes a length from the sample rate instead. On a
device declaring a large IN wMaxPacketSize and a small OUT
wMaxPacketSize, the resulting memcpy(), or the memset() when the
playback stream is idle, runs past its slice and, as the reproducer
below shows, beyond the allocation.
usb_submit_urb() is not a backstop. max_packet_size_out comes from
usb_maxpacket(), which returns only the low 11 bits of wMaxPacketSize,
while USB core validates a high-speed isochronous length against that
base scaled by usb_endpoint_maxp_mult(). A length of up to three times
the allocated slice is therefore accepted, and even a rejected URB is
only rejected after the write.
Reject a packet that does not fit the slice the driver allocated for it.
Clamping it instead would silently shorten the capture-derived rate
feedback and desynchronize the two streams.
BUG: KASAN: slab-out-of-bounds in submit_audio_out_urb (sound/usb/line6/playback.c:229)
Write of size 1024 at addr ffff888100bbd400 by task kworker/1:2/5002
Workqueue: events line6_startup_work
Call Trace:
__asan_memcpy (mm/kasan/shadow.c:106)
submit_audio_out_urb (sound/usb/line6/playback.c:229)
line6_submit_audio_out_all_urbs (sound/usb/line6/playback.c:291)
line6_stream_start (sound/usb/line6/pcm.c:194)
line6_pcm_acquire (sound/usb/line6/pcm.c:337)
line6_startup_work (sound/usb/line6/driver.c:728)
process_one_work (kernel/workqueue.c:3396)
worker_thread (kernel/workqueue.c:3479 kernel/workqueue.c:3560)
kthread (kernel/kthread.c:436)
ret_from_fork (arch/x86/kernel/process.c:158)
ret_from_fork_asm (arch/x86/entry/entry_64.S:245)
The buggy address belongs to the object at ffff888100bbd400
which belongs to the cache kmalloc-256 of size 256
The buggy address is located 0 bytes inside of
allocated 256-byte region [ffff888100bbd400, ffff888100bbd500) |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel: validate DDC record lengths
Parse DDC record lengths in unsigned storage so 0xFF does not wrap.
Reject records smaller than the mandatory three-byte header, records
exceeding U8_MAX, and records exceeding remaining firmware bytes before
issuing Intel_Write_DDC.
This issue was reported by Claude Mythos. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Hold map BTF for the memory allocator destructor record
bpf_ma_set_dtor() duplicates map->record so that the bpf_mem_alloc
destructor can release the special fields of hash and rhash map elements
once the allocator frees them for good. btf_record_dup() only acquires
references on kernel and module BTF. Fields whose types live in the map
BTF keep pointing into it: a kptr to a local type refers to map->btf,
and a list_head or rb_root field carries a value_rec owned by the struct
meta table of map->btf.
That borrowed state can outlive the map. When RCU callbacks are still in
flight, bpf_mem_alloc_destroy() copies the allocator and defers the final
drain, together with the destructor context, to a workqueue.
bpf_map_free() then frees map->record and drops the map's BTF reference
as soon as map_free() returns. Once the program that loaded the BTF is
gone as well, the BTF is freed while the worker still uses the
duplicate. The worker dereferences it through btf_is_kernel() and
btf_find_struct_meta() in bpf_obj_free_fields() when destroying elements
that were freed under RCU, and through btf_is_kernel() in
btf_record_free() when releasing the context itself:
BUG: KASAN: slab-use-after-free in btf_is_kernel+0x19/0x30
Read of size 1 at addr ffff88811505dce8 by task kworker/u16:2/50
Workqueue: events_unbound free_mem_alloc_deferred
Call Trace:
btf_is_kernel+0x19/0x30
btf_record_free+0xc7/0xf0
htab_dtor_ctx_free+0x1a/0x30
free_mem_alloc_no_barrier+0x39/0x230
free_mem_alloc_deferred+0x2a/0x40
process_scheduled_works+0x5ce/0x9d0
worker_thread+0x42a/0x5e0
kthread+0x1f5/0x230
ret_from_fork+0x1dd/0x390
ret_from_fork_asm+0x1a/0x30
Allocated by task 358:
__kmalloc_cache_noprof+0x287/0x510
btf_new_fd+0xf7/0x3d0
__sys_bpf+0x487/0x840
Freed by task 0:
kfree+0x186/0x560
rcu_core+0x6f6/0xd40
Freeing a map that still holds more elements than the allocator's high
watermark is enough to get there, because the bulk free during teardown
queues the RCU callback that makes bpf_mem_alloc_destroy() defer.
Non-preallocated hash maps and resizable hash maps both register the
destructor and are affected alike.
Keep one reference on the map BTF in the destructor context. Every
non-kernel pointer in the duplicated record is either map->btf or memory
owned by it, so a single reference covers kptrs, list heads, and rb
roots, and mirrors what bpf_map_meta_alloc() does for the duplicated
record of an inner map. Release it only after the duplicated record has
been freed: the worker is preemptible and not in an RCU read-side
critical section, so dropping the last reference first would let the
BTF be freed while btf_record_free() still reads its fields. |
| In the Linux kernel, the following vulnerability has been resolved:
net: sparx5: skip ptp deinit if init was skipped
sparx5_ptp_init() returns early on the base lan969x variants
because they do not have the SPX5_FEATURE_PTP flag. It also returns early
when no "ptp" interrupt is described. Unbinding the driver then causes a
NULL pointer dereference when cleaning up uninitialized tx_skbs queues:
Unable to handle kernel NULL pointer dereference at virtual address
0000000000000008
Call trace:
skb_queue_purge_reason+0x68/0x120 (P)
sparx5_ptp_deinit+0x64/0xc0
mchp_sparx5_remove+0x38/0x70
platform_remove+0x20/0x30
device_remove+0x4c/0x80
Before per-port tx_skbs were added, a NULL dereference would have happened
when calling ptp_clock_unregister() on the never-registered PTP clocks.
Fix by returning early in sparx5_ptp_deinit() if PTP is not used. |
| In the Linux kernel, the following vulnerability has been resolved:
perf: Fix race between perf_event_exit_task() and perf_pending_task()
A race condition exists between perf_event_exit_task() and
perf_pending_task() during begin_new_exec().
During begin_new_exec(), perf_event_exit_task() may be called, and the
PF_EXITING flag is not set on task. So perf_sigtrap() continues to execute
and triggers WARN_ON_ONCE(event->ctx->task != current).
Since both task exit and exec paths can call perf_event_exit_task() which
sets ctx->task to TASK_TOMBSTONE, fix this by explicitly checking if
event->ctx->task equals TASK_TOMBSTONE and dropping the redundant
PF_EXITING check. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Add missing IS_ERR check for ovl_adaptor platform device
platform_device_register_data() can fail and return an ERR_PTR, but the
return value is used without checking, leading to an invalid pointer
being stored in ddp_comp[].dev and passed to component_match_add() and
mtk_ddp_comp_init(), which could result in a kernel crash.
Add an IS_ERR() check to jump to the error handling path on failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/mediatek: Fix pdev reference leak in mtk_drm_bind()
When the device is not the mmsys master, mtk_drm_bind() returns early
after taking a reference on the disp-mutex device via
of_find_device_by_node(), without ever dropping it: mtk_drm_unbind()
only puts mutex_dev for the master. Drop the reference before returning
from the non-master path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix ACP MFD device leak on init failure
acp_hw_init() registers ACP child devices with mfd_add_devices() before
attaching them to the ACP power domain and initializing the hardware.
If attaching a child to the power domain fails, or if the ACP reset or
clock enable operation times out, the failure path frees only the
source cell, resource, and platform-data allocations. The child
platform devices already registered by mfd_add_devices() remain
registered and are never released.
Remove the children from the power domain and unregister the MFD
devices on failures that occur after mfd_add_devices() succeeds. Keep
mfd_add_devices() failures on the existing cleanup path since the MFD
core already rolls back partially registered children itself.
The issue was identified by a static analysis tool I developed and
confirmed by manual review.
(cherry picked from commit 63da68d6a2279ec945581c990c5a59a5ae8b5560) |
| In the Linux kernel, the following vulnerability has been resolved:
binderfs: fix UAF write in binder_add_device
binderfs_binder_device_create() publishes the new dentry with
d_make_persistent() and then calls simple_done_creating(), which drops
the parent directory lock and the creator's dentry reference. It then
calls binder_add_device() to register the device in the global
binder_devices list.
After simple_done_creating() releases the parent directory lock, a
concurrent unlinkat() can remove the new device entry. Dropping the
creator's dentry reference can then trigger binderfs_evict_inode(),
freeing the device. binder_add_device() later accesses the freed
object, causing UAF write.
Found by a modified Syzkaller:
BUG: KASAN: slab-use-after-free in hlist_add_head include/linux/list.h:1073 [inline]
BUG: KASAN: slab-use-after-free in binder_add_device+0xa9/0xc0 drivers/android/binder.c:7068
Write of size 8 at addr ffff88805b340c00 by task syz.1.532/11389
CPU: 0 UID: 0 PID: 11389 Comm: syz.1.532 Not tainted 7.2.0 #4 PREEMPT(full)
Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x10e/0x1f0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xf7/0x600 mm/kasan/report.c:482
kasan_report+0xe4/0x120 mm/kasan/report.c:595
hlist_add_head include/linux/list.h:1073 [inline]
binder_add_device+0xa9/0xc0 drivers/android/binder.c:7068
binderfs_binder_device_create.isra.0+0x724/0x990 drivers/android/binderfs.c:196
binder_ctl_ioctl+0x186/0x1b0 drivers/android/binderfs.c:241
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7ff9027a833d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ff903674018 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007ff902a35fa0 RCX: 00007ff9027a833d
RDX: 0000200000000500 RSI: 00000000c1086201 RDI: 0000000000000004
RBP: 00007ff902850733 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ff902a36038 R14: 00007ff902a35fa0 R15: 00007ffd7166bfa0
</TASK>
Allocated by task 11389:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:57
kasan_save_track+0x14/0x30 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__kmalloc_cache_noprof+0x2e4/0x6f0 mm/slub.c:5489
_kmalloc_noprof include/linux/slab.h:988 [inline]
_kzalloc_noprof include/linux/slab.h:1309 [inline]
binderfs_binder_device_create.isra.0+0x17a/0x990 drivers/android/binderfs.c:148
binder_ctl_ioctl+0x186/0x1b0 drivers/android/binderfs.c:241
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x18e/0x210 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0x116/0x800 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task 11389:
kasan_save_stack+0x33/0x60 mm/kasan/common.c:57
kasan_save_track+0x14/0x30 mm/kasan/common.c:78
kasan_save_free_info+0x3b/0x60 mm/kasan/generic.c:584
poison_slab_object mm/kasan/common.c:253 [inline]
__kasan_slab_free+0x5f/0x80 mm/kasan/common.c:285
kasan_slab_free include/linux/kasan.h:235 [inline]
slab_free_hook mm/slub.c:2677 [inline]
slab_free mm/slub.c:6377 [inline]
kfree+0x2fc/0x6e0 mm/slub.c:6692
binderf
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
nitro_enclaves: fix use-after-free on SLOT_ALLOC failure
When ne_create_vm_ioctl() fails the SLOT_ALLOC request after
anon_inode_getfile() has succeeded, the error path calls
fput(enclave_file) and then frees ne_enclave.
In normal userspace context, fput() defers the final __fput() via
task_work. ne_enclave_release() therefore runs after ne_enclave has
already been freed and dereferences ne_enclave->slot_uid, causing a
use-after-free: KASAN: slab-use-after-free in ne_enclave_release.
The enclave has no slot allocated and is not yet linked into the
enclaves list on this error path, so ne_enclave_release() is expected
to return early when slot_uid is zero. However, reading slot_uid
already accesses the freed object.
Clear enclave_file->private_data before fput() on the error path.
ne_enclave_release() then returns immediately when private_data is
NULL, leaving the ioctl error path as the sole owner of ne_enclave.
This is safe because the file has not been fd_install()'d yet.
Tested on an AWS EC2 m5.2xlarge with CONFIG_KASAN=y. Without the
patch, the reproducer triggers a KASAN slab-use-after-free on every
SLOT_ALLOC failure. With the patch, no KASAN report is produced and
the SLOT_ALLOC error is still returned. Normal enclave creation and
teardown are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
USB: cdc-acm: skip URB restart in port_shutdown if disconnected
acm_port_shutdown() is called from the tty-port machinery whenever the
last user closes the port. acm_disconnect() sets acm->disconnected and
calls tty_port_tty_vhangup(), which eventually triggers port_shutdown().
At that point acm_disconnect() has already called acm_poison_urbs() and
is about to free the control and read URBs.
However, acm_port_shutdown() unconditionally calls acm_unpoison_urbs()
and, when the ALWAYS_POLL_CTRL quirk is set, immediately re-submits the
ctrlurb and all read URBs. If the concurrent acm_disconnect() then
frees those URBs and their DMA buffers while they are in-flight, the
result is a use-after-free in acm_ctrl_irq() or acm_read_bulk_callback()
accessing the freed DMA memory.
Fix by checking acm->disconnected after draining the delayed anchor and
returning early: if we are in a disconnect path the URBs must remain
poisoned and must not be resubmitted.
The early return is placed after the delayed-anchor drain loop because
that loop only cancels write-side accounting (wb->use = false and
autopm counter) and does not touch the hardware path. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: anx7411 - stop the IRQ before destroying the workqueue
The IRQ is devm-managed, so it can still queue plat->work while
remove() is tearing the queue down. Disable it first. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: aspeed-vhub: cancel wake work on device removal
wake_work is armed from the gadget .wakeup callback to resume suspended
downstream ports, and it is never cancelled in ast_vhub_remove(), so a
work item queued before or during removal can run after devm has freed
vhub and its ports, a use-after-free.
Cancelling the work alone is not sufficient: usb_gadget_wakeup() takes
no lock and the unbind path never clears wakeup_en, so a remote-wakeup
request in flight on another CPU can re-arm the work after the cancel
and before vhub is freed.
ast_vhub_del_dev() already clears d->registered under vhub->lock before
unregistering the gadget. Refuse the wakeup in ast_vhub_udc_wakeup()
once d->registered is clear: the check and the schedule_work() are then
atomic against the unbind, so a wakeup that passed before the flag was
cleared is drained by the cancel_work_sync() after the del_dev loop,
and one that arrives later returns without arming. Also move INIT_WORK()
to the top of ast_vhub_probe(), since the probe error path reuses
ast_vhub_remove() and would otherwise cancel a never-initialized work
item.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
serial: 8250_bcm7271: fix use-after-free in brcmuart_remove()
brcmuart_handle_irq() starts priv->hrt to work around a receive-timeout
quirk of the 8250 core when hardware flow control is enabled; the timer
callback brcmuart_hrtimer_func() dereferences priv.
brcmuart_remove() cancels the hrtimer before it unregisters the port, so
a receive-timeout interrupt that arrives in between re-arms the timer.
After devm frees priv, the callback runs on freed memory.
Unregister the port before cancelling the hrtimer.
serial8250_unregister_port() shuts the port down and frees its IRQ, so
brcmuart_handle_irq() can no longer restart the timer, and the final
hrtimer_cancel() drains any timer that was armed before or during the
unregister.
This issue was found by an in-house static analysis tool. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Serialize compat port-info ioctls
The native sequencer ioctl path serializes handler calls with
client->ioctl_mutex, but the translated port-info compat path invokes the
same handlers through snd_seq_kernel_client_ctl() without taking that
mutex.
This lets concurrent compat CREATE_PORT requests pass the port-count
check before any request reaches the serialized insertion. The computed
integer port index can then exceed the address field range and wrap to an
existing index. Subsequent subscriber teardown can resolve the duplicate
address to the wrong port and access a freed subscriber.
Take ioctl_mutex while dispatching converted port-info requests, matching
the native ioctl path. All translated port-info commands share this
helper, so their accesses to the client port state are serialized as
well. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: Serialize SMP remote OOB data access
build_pairing_cmd() looks up remote OOB data and copies its contents
without holding hdev->lock, which serializes the list's writers. After
SMP finds an entry, a concurrent management Remove Remote OOB Data
command can unlink and free it before SMP reads its present flag or
copies its random and confirmation values. Removal can also invalidate
an entry while the lookup is still traversing the list.
KASAN reported:
BUG: KASAN: slab-use-after-free in build_pairing_cmd+0x948/0x9b0
Call Trace:
build_pairing_cmd+0x948/0x9b0
smp_recv_cb+0x459f/0x8110
l2cap_recv_frame+0xf14/0x9190
l2cap_recv_acldata+0xa64/0xd40
hci_rx_work+0x4ca/0x730
Allocated by task 87:
hci_add_remote_oob_data+0x11d/0x530
add_remote_oob_data+0x282/0x400
hci_sock_sendmsg+0x1033/0x1ea0
Freed by task 93:
hci_remote_oob_data_clear+0x108/0x1c0
remove_remote_oob_data+0x198/0x220
hci_sock_sendmsg+0x1033/0x1ea0
Taking hdev->lock in build_pairing_cmd() would recurse for callers that
already hold it and invert the device-to-L2CAP lock order on the receive
path. Add a per-device remote_oob_lock instead, held across the SMP
lookup and copies and by the add, remove and clear helpers. Cover
initialization and in-place updates as well, so SMP cannot read partially
initialized or updated OOB values. Release the mutex on allocation
failure, preserving the existing error return.
The new critical sections acquire no device, connection or channel locks.
Writers retain their existing hdev->lock protection, which continues to
serialize the other readers without changing their locking or behavior. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-multipath: set BLK_FEAT_ZONED only after the zone info is known
The namespace head is marked zoned at allocation time based only on the
command set identifier. If the zone info query reports a zero zone size,
the path namespace is registered without zoned limits while the head
still advertises the zoned capability with a zone size of zero, and
reporting zones or writing to the head then shifts by ilog2(0).
Drop the zoned feature from the head allocation and let the head limits
refresh stack it in from the path namespace instead. |
