| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/fpsimd: signal: Fix restoration of SVE context
When SME is supported, Restoring SVE signal context can go wrong in a
few ways, including placing the task into an invalid state where the
kernel may read from out-of-bounds memory (and may potentially take a
fatal fault) and/or may kill the task with a SIGKILL.
(1) Restoring a context with SVE_SIG_FLAG_SM set can place the task into
an invalid state where SVCR.SM is set (and sve_state is non-NULL)
but TIF_SME is clear, consequently resuting in out-of-bounds memory
reads and/or killing the task with SIGKILL.
This can only occur in unusual (but legitimate) cases where the SVE
signal context has either been modified by userspace or was saved in
the context of another task (e.g. as with CRIU), as otherwise the
presence of an SVE signal context with SVE_SIG_FLAG_SM implies that
TIF_SME is already set.
While in this state, task_fpsimd_load() will NOT configure SMCR_ELx
(leaving some arbitrary value configured in hardware) before
restoring SVCR and attempting to restore the streaming mode SVE
registers from memory via sve_load_state(). As the value of
SMCR_ELx.LEN may be larger than the task's streaming SVE vector
length, this may read memory outside of the task's allocated
sve_state, reading unrelated data and/or triggering a fault.
While this can result in secrets being loaded into streaming SVE
registers, these values are never exposed. As TIF_SME is clear,
fpsimd_bind_task_to_cpu() will configure CPACR_ELx.SMEN to trap EL0
accesses to streaming mode SVE registers, so these cannot be
accessed directly at EL0. As fpsimd_save_user_state() verifies the
live vector length before saving (S)SVE state to memory, no secret
values can be saved back to memory (and hence cannot be observed via
ptrace, signals, etc).
When the live vector length doesn't match the expected vector length
for the task, fpsimd_save_user_state() will send a fatal SIGKILL
signal to the task. Hence the task may be killed after executing
userspace for some period of time.
(2) Restoring a context with SVE_SIG_FLAG_SM clear does not clear the
task's SVCR.SM. If SVCR.SM was set prior to restoring the context,
then the task will be left in streaming mode unexpectedly, and some
register state will be combined inconsistently, though the task will
be left in legitimate state from the kernel's PoV.
This can only occur in unusual (but legitimate) cases where ptrace
has been used to set SVCR.SM after entry to the sigreturn syscall,
as syscall entry clears SVCR.SM.
In these cases, the the provided SVE register data will be loaded
into the task's sve_state using the non-streaming SVE vector length
and the FPSIMD registers will be merged into this using the
streaming SVE vector length.
Fix (1) by setting TIF_SME when setting SVCR.SM. This also requires
ensuring that the task's sme_state has been allocated, but as this could
contain live ZA state, it should not be zeroed. Fix (2) by clearing
SVCR.SM when restoring a SVE signal context with SVE_SIG_FLAG_SM clear.
For consistency, I've pulled the manipulation of SVCR, TIF_SVE, TIF_SME,
and fp_type earlier, immediately after the allocation of
sve_state/sme_state, before the restore of the actual register state.
This makes it easier to ensure that these are always modified
consistently, even if a fault is taken while reading the register data
from the signal context. I do not expect any software to depend on the
exact state restored when a fault is taken while reading the context. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64/fpsimd: signal: Allocate SSVE storage when restoring ZA
The code to restore a ZA context doesn't attempt to allocate the task's
sve_state before setting TIF_SME. Consequently, restoring a ZA context
can place a task into an invalid state where TIF_SME is set but the
task's sve_state is NULL.
In legitimate but uncommon cases where the ZA signal context was NOT
created by the kernel in the context of the same task (e.g. if the task
is saved/restored with something like CRIU), we have no guarantee that
sve_state had been allocated previously. In these cases, userspace can
enter streaming mode without trapping while sve_state is NULL, causing a
later NULL pointer dereference when the kernel attempts to store the
register state:
| # ./sigreturn-za
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
| Mem abort info:
| ESR = 0x0000000096000046
| EC = 0x25: DABT (current EL), IL = 32 bits
| SET = 0, FnV = 0
| EA = 0, S1PTW = 0
| FSC = 0x06: level 2 translation fault
| Data abort info:
| ISV = 0, ISS = 0x00000046, ISS2 = 0x00000000
| CM = 0, WnR = 1, TnD = 0, TagAccess = 0
| GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
| user pgtable: 4k pages, 52-bit VAs, pgdp=0000000101f47c00
| [0000000000000000] pgd=08000001021d8403, p4d=0800000102274403, pud=0800000102275403, pmd=0000000000000000
| Internal error: Oops: 0000000096000046 [#1] SMP
| Modules linked in:
| CPU: 0 UID: 0 PID: 153 Comm: sigreturn-za Not tainted 6.19.0-rc1 #1 PREEMPT
| Hardware name: linux,dummy-virt (DT)
| pstate: 214000c9 (nzCv daIF +PAN -UAO -TCO +DIT -SSBS BTYPE=--)
| pc : sve_save_state+0x4/0xf0
| lr : fpsimd_save_user_state+0xb0/0x1c0
| sp : ffff80008070bcc0
| x29: ffff80008070bcc0 x28: fff00000c1ca4c40 x27: 63cfa172fb5cf658
| x26: fff00000c1ca5228 x25: 0000000000000000 x24: 0000000000000000
| x23: 0000000000000000 x22: fff00000c1ca4c40 x21: fff00000c1ca4c40
| x20: 0000000000000020 x19: fff00000ff6900f0 x18: 0000000000000000
| x17: fff05e8e0311f000 x16: 0000000000000000 x15: 028fca8f3bdaf21c
| x14: 0000000000000212 x13: fff00000c0209f10 x12: 0000000000000020
| x11: 0000000000200b20 x10: 0000000000000000 x9 : fff00000ff69dcc0
| x8 : 00000000000003f2 x7 : 0000000000000001 x6 : fff00000c1ca5b48
| x5 : fff05e8e0311f000 x4 : 0000000008000000 x3 : 0000000000000000
| x2 : 0000000000000001 x1 : fff00000c1ca5970 x0 : 0000000000000440
| Call trace:
| sve_save_state+0x4/0xf0 (P)
| fpsimd_thread_switch+0x48/0x198
| __switch_to+0x20/0x1c0
| __schedule+0x36c/0xce0
| schedule+0x34/0x11c
| exit_to_user_mode_loop+0x124/0x188
| el0_interrupt+0xc8/0xd8
| __el0_irq_handler_common+0x18/0x24
| el0t_64_irq_handler+0x10/0x1c
| el0t_64_irq+0x198/0x19c
| Code: 54000040 d51b4408 d65f03c0 d503245f (e5bb5800)
| ---[ end trace 0000000000000000 ]---
Fix this by having restore_za_context() ensure that the task's sve_state
is allocated, matching what we do when taking an SME trap. Any live
SVE/SSVE state (which is restored earlier from a separate signal
context) must be preserved, and hence this is not zeroed. |
| Improper Check for Unusual or Exceptional Conditions vulnerability in Drupal Group invite allows Forceful Browsing.This issue affects Group invite: from 0.0.0 before 2.3.9, from 3.0.0 before 3.0.4, from 4.0.0 before 4.0.4. |
| Privilege Defined With Unsafe Actions vulnerability in Drupal Role Delegation allows Privilege Escalation.This issue affects Role Delegation: from 1.3.0 before 1.5.0. |
| melange allows users to build apk packages using declarative pipelines. From version 0.14.0 to before 0.40.3, an attacker who can influence a melange configuration file (e.g., through pull request-driven CI or build-as-a-service scenarios) could read arbitrary files from the host system. The LicensingInfos function in pkg/config/config.go reads license files specified in copyright[].license-path without validating that paths remain within the workspace directory, allowing path traversal via ../ sequences. The contents of the traversed file are embedded into the generated SBOM as license text, enabling exfiltration of sensitive data through build artifacts. This issue has been patched in version 0.40.3. |
| Bambuddy is a self-hosted print archive and management system for Bambu Lab 3D printers. Prior to version 0.1.7, a hardcoded secret key used for signing JWTs is checked into source code and ManyAPI routes do not check authentication. This issue has been patched in version 0.1.7. |
| IBM Common Cryptographic Architecture (CCA) 7.5.52 and 8.4.82 could allow an unauthenticated user to execute arbitrary commands with elevated privileges on the system. |
| OpenSlides is a free, web based presentation and assembly system for managing and projecting agenda, motions and elections of an assembly. Prior to version 4.2.29, OpenSlides supports local logins with username and password or an optionally configurable single sign on with SAML via an external IDP. For users synced to OpenSlides via an external IDP, there is an incorrect access control regarding the local login of these users. Users can successfully login using the local login form and the OpenSlides username of a SAML user and a trivial password. This password is valid for all SAML users. This issue has been patched in version 4.2.29. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: fix drm panic null pointer when driver not support atomic
When driver not support atomic, fb using plane->fb rather than
plane->state->fb.
(cherry picked from commit 2f2a72de673513247cd6fae14e53f6c40c5841ef) |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Sanitize payload size to prevent member overflow
In qla27xx_copy_fpin_pkt() and qla27xx_copy_multiple_pkt(), the frame_size
reported by firmware is used to calculate the copy length into
item->iocb. However, the iocb member is defined as a fixed-size 64-byte
array within struct purex_item.
If the reported frame_size exceeds 64 bytes, subsequent memcpy calls will
overflow the iocb member boundary. While extra memory might be allocated,
this cross-member write is unsafe and triggers warnings under
CONFIG_FORTIFY_SOURCE.
Fix this by capping total_bytes to the size of the iocb member (64 bytes)
before allocation and copying. This ensures all copies remain within the
bounds of the destination structure member. |
| NanoMQ MQTT Broker (NanoMQ) is an all-around Edge Messaging Platform. In version 0.24.6, NanoMQ has a protocol parsing / forwarding inconsistency when handling shared subscriptions ($share/). A malformed SUBSCRIBE topic such as $share/ab (missing the second /) is not strictly validated during the subscription stage, so the invalid Topic Filter is stored into the subscription table. Later, when any PUBLISH matches this subscription, the broker send path (nmq_pipe_send_start_v4/v5) performs a second $share/ parsing using strchr() and increments the returned pointer without NULL checks. If the second strchr() returns NULL, sub_topic++ turns the pointer into an invalid address (e.g. 0x1). This invalid pointer is then passed into topic_filtern(), which triggers strlen() and crashes with SIGSEGV. The crash is stable and remotely triggerable. This issue has been patched in version 0.24.7. |
| OpenSTAManager is an open source management software for technical assistance and invoicing. In version 2.9.8 and prior, there is a SQL Injection vulnerability in the Stampe Module. At time of publication, no known patch exists. |
| Wing FTP Server 6.0.7 contains an unquoted service path vulnerability that allows local attackers to potentially execute arbitrary code with elevated system privileges. Attackers can exploit the unquoted binary path in the service configuration to inject malicious executables that will be launched with LocalSystem permissions. |
| Amiti Antivirus 25.0.640 contains an unquoted service path vulnerability in its Windows service configurations. Attackers can exploit the unquoted path to inject and execute malicious code with elevated LocalSystem privileges by placing executable files in specific directory locations. |
| NETGATE Data Backup 3.0.620 contains an unquoted service path vulnerability in its NGDatBckpSrv Windows service configuration. Attackers can exploit the unquoted path to inject and execute malicious code with LocalSystem privileges by placing executable files in specific directory locations. |
| TexasSoft CyberPlanet 6.4.131 contains an unquoted service path vulnerability in the CCSrvProxy service that allows local attackers to execute arbitrary code. Attackers can exploit the unquoted path in 'C:\Program Files (x86)\TenaxSoft\CyberPlanet\SrvProxy.exe' to inject malicious executables and gain elevated system privileges. |
| Easy-Hide-IP 5.0.0.3 contains an unquoted service path vulnerability in the EasyRedirect service that allows local attackers to potentially execute arbitrary code. Attackers can exploit the unquoted path in 'C:\Program Files\Easy-Hide-IP\rdr\EasyRedirect.exe' to inject malicious executables and escalate privileges. |
| IBM Cloud Pak System displays sensitive information in user messages that could aid in further attacks against the system. |
| A vulnerability in the text rendering subsystem of Cisco TelePresence Collaboration Endpoint (CE) Software and Cisco RoomOS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device.
This vulnerability is due to insufficient validation of input received by an affected device. An attacker could exploit this vulnerability by getting the affected device to render crafted text, for example, a crafted meeting invitation. As indicated in the CVSS score, no user interaction is required, such as accepting the meeting invitation. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition. |
| A vulnerability in the web-based management interface of Cisco Evolved Programmable Network Manager (EPNM) and Cisco Prime Infrastructure could allow an unauthenticated, remote attacker to redirect a user to a malicious web page.
This vulnerability is due to improper input validation of the parameters in the HTTP request. An attacker could exploit this vulnerability by intercepting and modifying an HTTP request from a user. A successful exploit could allow the attacker to redirect the user to a malicious web page. |
