| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Edimax EW-7438RPn 1.13 contains a cross-site request forgery vulnerability in the MAC filtering configuration interface. Attackers can craft malicious web pages to trick users into adding unauthorized MAC addresses to the device's filtering rules without their consent. |
| The Chapa Payment Gateway Plugin for WooCommerce plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 1.0.3 via 'chapa_proceed' WooCommerce API endpoint. This makes it possible for unauthenticated attackers to extract sensitive data including the merchant's Chapa secret API key. |
| In the Linux kernel, the following vulnerability has been resolved:
bnxt_en: Fix NULL pointer crash in bnxt_ptp_enable during error cleanup
When bnxt_init_one() fails during initialization (e.g.,
bnxt_init_int_mode returns -ENODEV), the error path calls
bnxt_free_hwrm_resources() which destroys the DMA pool and sets
bp->hwrm_dma_pool to NULL. Subsequently, bnxt_ptp_clear() is called,
which invokes ptp_clock_unregister().
Since commit a60fc3294a37 ("ptp: rework ptp_clock_unregister() to
disable events"), ptp_clock_unregister() now calls
ptp_disable_all_events(), which in turn invokes the driver's .enable()
callback (bnxt_ptp_enable()) to disable PTP events before completing the
unregistration.
bnxt_ptp_enable() attempts to send HWRM commands via bnxt_ptp_cfg_pin()
and bnxt_ptp_cfg_event(), both of which call hwrm_req_init(). This
function tries to allocate from bp->hwrm_dma_pool, causing a NULL
pointer dereference:
bnxt_en 0000:01:00.0 (unnamed net_device) (uninitialized): bnxt_init_int_mode err: ffffffed
KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f]
Call Trace:
__hwrm_req_init (drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c:72)
bnxt_ptp_enable (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:323 drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:517)
ptp_disable_all_events (drivers/ptp/ptp_chardev.c:66)
ptp_clock_unregister (drivers/ptp/ptp_clock.c:518)
bnxt_ptp_clear (drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c:1134)
bnxt_init_one (drivers/net/ethernet/broadcom/bnxt/bnxt.c:16889)
Lines are against commit f8f9c1f4d0c7 ("Linux 6.19-rc3")
Fix this by clearing and unregistering ptp (bnxt_ptp_clear()) before
freeing HWRM resources. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: fix aux device unplugging when rdma is not supported by vport
If vport flags do not contain VIRTCHNL2_VPORT_ENABLE_RDMA, driver does not
allocate vdev_info for this vport. This leads to kernel NULL pointer
dereference in idpf_idc_vport_dev_down(), which references vdev_info for
every vport regardless.
Check, if vdev_info was ever allocated before unplugging aux device. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix NULL pointer dereference in do_abort_log_replay()
Coverity reported a NULL pointer dereference issue (CID 1666756) in
do_abort_log_replay(). When btrfs_alloc_path() fails in
replay_one_buffer(), wc->subvol_path is NULL, but btrfs_abort_log_replay()
calls do_abort_log_replay() which unconditionally dereferences
wc->subvol_path when attempting to print debug information. Fix this by
adding a NULL check before dereferencing wc->subvol_path in
do_abort_log_replay(). |
| In the Linux kernel, the following vulnerability has been resolved:
PM: hibernate: Fix crash when freeing invalid crypto compressor
When crypto_alloc_acomp() fails, it returns an ERR_PTR value, not NULL.
The cleanup code in save_compressed_image() and load_compressed_image()
unconditionally calls crypto_free_acomp() without checking for ERR_PTR,
which causes crypto_acomp_tfm() to dereference an invalid pointer and
crash the kernel.
This can be triggered when the compression algorithm is unavailable
(e.g., CONFIG_CRYPTO_LZO not enabled).
Fix by adding IS_ERR_OR_NULL() checks before calling crypto_free_acomp()
and acomp_request_free(), similar to the existing kthread_stop() check.
[ rjw: Added 2 empty code lines ] |
| In the Linux kernel, the following vulnerability has been resolved:
net/ena: fix missing lock when update devlink params
Fix assert lock warning while calling devl_param_driverinit_value_set()
in ena.
WARNING: net/devlink/core.c:261 at devl_assert_locked+0x62/0x90, CPU#0: kworker/0:0/9
CPU: 0 UID: 0 PID: 9 Comm: kworker/0:0 Not tainted 6.19.0-rc2+ #1 PREEMPT(lazy)
Hardware name: Amazon EC2 m8i-flex.4xlarge/, BIOS 1.0 10/16/2017
Workqueue: events work_for_cpu_fn
RIP: 0010:devl_assert_locked+0x62/0x90
Call Trace:
<TASK>
devl_param_driverinit_value_set+0x15/0x1c0
ena_devlink_alloc+0x18c/0x220 [ena]
? __pfx_ena_devlink_alloc+0x10/0x10 [ena]
? trace_hardirqs_on+0x18/0x140
? lockdep_hardirqs_on+0x8c/0x130
? __raw_spin_unlock_irqrestore+0x5d/0x80
? __raw_spin_unlock_irqrestore+0x46/0x80
? devm_ioremap_wc+0x9a/0xd0
ena_probe+0x4d2/0x1b20 [ena]
? __lock_acquire+0x56a/0xbd0
? __pfx_ena_probe+0x10/0x10 [ena]
? local_clock+0x15/0x30
? __lock_release.isra.0+0x1c9/0x340
? mark_held_locks+0x40/0x70
? lockdep_hardirqs_on_prepare.part.0+0x92/0x170
? trace_hardirqs_on+0x18/0x140
? lockdep_hardirqs_on+0x8c/0x130
? __raw_spin_unlock_irqrestore+0x5d/0x80
? __raw_spin_unlock_irqrestore+0x46/0x80
? __pfx_ena_probe+0x10/0x10 [ena]
......
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: make calc_target() set t->paused, not just clear it
Currently calc_target() clears t->paused if the request shouldn't be
paused anymore, but doesn't ever set t->paused even though it's able to
determine when the request should be paused. Setting t->paused is left
to __submit_request() which is fine for regular requests but doesn't
work for linger requests -- since __submit_request() doesn't operate
on linger requests, there is nowhere for lreq->t.paused to be set.
One consequence of this is that watches don't get reestablished on
paused -> unpaused transitions in cases where requests have been paused
long enough for the (paused) unwatch request to time out and for the
subsequent (re)watch request to enter the paused state. On top of the
watch not getting reestablished, rbd_reregister_watch() gets stuck with
rbd_dev->watch_mutex held:
rbd_register_watch
__rbd_register_watch
ceph_osdc_watch
linger_reg_commit_wait
It's waiting for lreq->reg_commit_wait to be completed, but for that to
happen the respective request needs to end up on need_resend_linger list
and be kicked when requests are unpaused. There is no chance for that
if the request in question is never marked paused in the first place.
The fact that rbd_dev->watch_mutex remains taken out forever then
prevents the image from getting unmapped -- "rbd unmap" would inevitably
hang in D state on an attempt to grab the mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
udp: call skb_orphan() before skb_attempt_defer_free()
Standard UDP receive path does not use skb->destructor.
But skmsg layer does use it, since it calls skb_set_owner_sk_safe()
from udp_read_skb().
This then triggers this warning in skb_attempt_defer_free():
DEBUG_NET_WARN_ON_ONCE(skb->destructor);
We must call skb_orphan() to fix this issue. |
| A non-administrative user can upload malicious files. When an administrator or the product accesses that file, an arbitrary script may be executed on the administrator's browser. Note that Movable Type 7 series and 8.4 series, which are End-of-Life (EOL), are affected by the vulnerability as well. |
| Claude Code is an agentic coding tool. Prior to version 1.0.111, Claude Code contained insufficient URL validation in its trusted domain verification mechanism for WebFetch requests. The application used a startsWith() function to validate trusted domains (e.g., docs.python.org, modelcontextprotocol.io), this could have enabled attackers to register domains like modelcontextprotocol.io.example.com that would pass validation. This could enable automatic requests to attacker-controlled domains without user consent, potentially leading to data exfiltration. This issue has been patched in version 1.0.111. |
| Claude Code is an agentic coding tool. Prior to version 2.0.74, due to a Bash command validation flaw in parsing ZSH clobber syntax, it was possible to bypass directory restrictions and write files outside the current working directory without user permission prompts. Exploiting this required the user to use ZSH and the ability to add untrusted content into a Claude Code context window. This issue has been patched in version 2.0.74. |
| NVIDIA Megatron-LM for all platforms contains a vulnerability in a script, where malicious data created by an attacker may cause a code injection issue. A successful exploit of this vulnerability may lead to code execution, escalation of privileges, information disclosure, data tampering. |
| Shenzhen Tenda AC7 firmware version V03.03.03.01_cn and prior contain an improper output encoding vulnerability in the web management interface. User-supplied input is reflected in HTTP responses without adequate escaping, allowing injection of arbitrary HTML or JavaScript in a victim’s browser context. |
| Shenzhen Tenda AC7 firmware version V03.03.03.01_cn and prior expose sensitive information in web management responses. Administrative credentials, including the router and/or admin panel password, are included in plaintext within configuration response bodies. In addition, responses lack appropriate Cache-Control directives, which may permit web browsers to cache pages containing these credentials and enable subsequent disclosure to an attacker with access to the client system or browser profile. |
| Shenzhen Tenda AC7 firmware version V03.03.03.01_cn and prior expose account credentials in plaintext within HTTP responses, allowing an on-path attacker to obtain sensitive authentication material. |
| If a malformed data is input to the affected product, a CSV file downloaded from the affected product may contain such malformed data. When a victim user download and open such a CSV file, the embedded code may be executed in the user's environment. Note that Movable Type 7 series and 8.4 series, which are End-of-Life (EOL), are affected by the vulnerability as well. |
| A security issue was discovered in ingress-nginx cthe `rules.http.paths.path` Ingress field can be used to inject configuration into nginx. This can lead to arbitrary code execution in the context of the ingress-nginx controller, and disclosure of Secrets accessible to the controller. (Note that in the default installation, the controller can access all Secrets cluster-wide.) |
| A security issue was discovered in ingress-nginx where the protection afforded by the `auth-url` Ingress annotation may not be effective in the presence of a specific misconfiguration.
If the ingress-nginx controller is configured with a default custom-errors configuration that includes HTTP errors 401 or 403, and if the configured default custom-errors backend is defective and fails to respect the X-Code HTTP header, then an Ingress with the `auth-url` annotation may be accessed even when authentication fails.
Note that the built-in custom-errors backend works correctly. To trigger this issue requires an administrator to specifically configure ingress-nginx with a broken external component. |
| Exposure of Private Personal Information to an Unauthorized Actor vulnerability in Apache Answer.
This issue affects Apache Answer: through 1.7.1.
An unauthenticated API endpoint incorrectly exposes full revision history for deleted content. This allows unauthorized user to retrieve restricted or sensitive information.
Users are recommended to upgrade to version 2.0.0, which fixes the issue. |
