| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/sh_tmu: Always leave device running after probe
The TMU device can be used as both a clocksource and a clockevent
provider. The driver tries to be smart and power itself on and off, as
well as enabling and disabling its clock when it's not in operation.
This behavior is slightly altered if the TMU is used as an early
platform device in which case the device is left powered on after probe,
but the clock is still enabled and disabled at runtime.
This has worked for a long time, but recent improvements in PREEMPT_RT
and PROVE_LOCKING have highlighted an issue. As the TMU registers itself
as a clockevent provider, clockevents_register_device(), it needs to use
raw spinlocks internally as this is the context of which the clockevent
framework interacts with the TMU driver. However in the context of
holding a raw spinlock the TMU driver can't really manage its power
state or clock with calls to pm_runtime_*() and clk_*() as these calls
end up in other platform drivers using regular spinlocks to control
power and clocks.
This mix of spinlock contexts trips a lockdep warning.
=============================
[ BUG: Invalid wait context ]
6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 Not tainted
-----------------------------
swapper/0/0 is trying to lock:
ffff000008c9e180 (&dev->power.lock){-...}-{3:3}, at: __pm_runtime_resume+0x38/0x88
other info that might help us debug this:
context-{5:5}
1 lock held by swapper/0/0:
ccree e6601000.crypto: ARM CryptoCell 630P Driver: HW version 0xAF400001/0xDCC63000, Driver version 5.0
#0: ffff8000817ec298
ccree e6601000.crypto: ARM ccree device initialized
(tick_broadcast_lock){-...}-{2:2}, at: __tick_broadcast_oneshot_control+0xa4/0x3a8
stack backtrace:
CPU: 0 UID: 0 PID: 0 Comm: swapper/0 Not tainted 6.18.0-arm64-renesas-09926-gee959e7c5e34 #1 PREEMPT
Hardware name: Renesas Salvator-X 2nd version board based on r8a77965 (DT)
Call trace:
show_stack+0x14/0x1c (C)
dump_stack_lvl+0x6c/0x90
dump_stack+0x14/0x1c
__lock_acquire+0x904/0x1584
lock_acquire+0x220/0x34c
_raw_spin_lock_irqsave+0x58/0x80
__pm_runtime_resume+0x38/0x88
sh_tmu_clock_event_set_oneshot+0x84/0xd4
clockevents_switch_state+0xfc/0x13c
tick_broadcast_set_event+0x30/0xa4
__tick_broadcast_oneshot_control+0x1e0/0x3a8
tick_broadcast_oneshot_control+0x30/0x40
cpuidle_enter_state+0x40c/0x680
cpuidle_enter+0x30/0x40
do_idle+0x1f4/0x280
cpu_startup_entry+0x34/0x40
kernel_init+0x0/0x130
do_one_initcall+0x0/0x230
__primary_switched+0x88/0x90
For non-PREEMPT_RT builds this is not really an issue, but for
PREEMPT_RT builds where normal spinlocks can sleep this might be an
issue. Be cautious and always leave the power and clock running after
probe. |
| In the Linux kernel, the following vulnerability has been resolved:
media: chips-media: wave5: Fix device cleanup order to prevent kernel panic
Move video device unregistration to the beginning of the remove function
to ensure all video operations are stopped before cleaning up the worker
thread and disabling PM runtime. This prevents hardware register access
after the device has been powered down.
In polling mode, the hrtimer periodically triggers
wave5_vpu_timer_callback() which queues work to the kthread worker.
The worker executes wave5_vpu_irq_work_fn() which reads hardware
registers via wave5_vdi_read_register().
The original cleanup order disabled PM runtime and powered down hardware
before unregistering video devices. When autosuspend triggers and powers
off the hardware, the video devices are still registered and the worker
thread can still be triggered by the hrtimer, causing it to attempt
reading registers from powered-off hardware. This results in a bus error
(synchronous external abort) and kernel panic.
This causes random kernel panics during encoding operations:
Internal error: synchronous external abort: 0000000096000010
[#1] PREEMPT SMP
Modules linked in: wave5 rpmsg_ctrl rpmsg_char ...
CPU: 0 UID: 0 PID: 1520 Comm: vpu_irq_thread
Tainted: G M W
pc : wave5_vdi_read_register+0x10/0x38 [wave5]
lr : wave5_vpu_irq_work_fn+0x28/0x60 [wave5]
Call trace:
wave5_vdi_read_register+0x10/0x38 [wave5]
kthread_worker_fn+0xd8/0x238
kthread+0x104/0x120
ret_from_fork+0x10/0x20
Code: aa1e03e9 d503201f f9416800 8b214000 (b9400000)
---[ end trace 0000000000000000 ]---
Kernel panic - not syncing: synchronous external abort:
Fatal exception |
| A vulnerability was identified in D-Link DI-8100 16.07.26A1. This affects the function sprintf of the file yyxz.asp. The manipulation of the argument ID leads to stack-based buffer overflow. The attack is possible to be carried out remotely. The exploit is publicly available and might be used. |
| A weakness has been identified in D-Link DI-8100 16.07.26A1. Affected is the function sprintf of the file /auto_reboot.asp of the component HTTP Handler. This manipulation of the argument enable/time causes buffer overflow. It is possible to initiate the attack remotely. The exploit has been made available to the public and could be used for attacks. |
| A security vulnerability has been detected in D-Link DI-8100 16.07.26A1. Affected by this vulnerability is the function url_rule_asp of the file /url_rule.asp of the component POST Parameter Handler. Such manipulation leads to buffer overflow. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. |
| A vulnerability was detected in D-Link DI-8100 16.07.26A1. Affected by this issue is the function tggl_asp of the file /tggl.asp of the component HTTP Request Handler. Performing a manipulation of the argument Name results in buffer overflow. The attack can be initiated remotely. The exploit is now public and may be used. |
| A flaw has been found in D-Link DI-8100 16.07.26A1. This affects an unknown part of the file /url_member.asp of the component Web Management Interface. Executing a manipulation of the argument Name can lead to buffer overflow. The attack can be launched remotely. The exploit has been published and may be used. |
| A vulnerability in the web-based management interface of Cisco IoT Field Network Director could allow an authenticated, remote attacker with low privileges to access files and execute commands on a remote router.
This vulnerability is due to insufficient input validation of user-supplied data. An attacker could exploit this vulnerability by submitting crafted input in the web-based management interface. A successful exploit could allow the attacker to create, read, or delete files and execute limited commands in user EXEC mode on a remote router. |
| A vulnerability in the web-based management interface of Cisco IoT Field Network Director could allow an authenticated, remote attacker with low privileges to cause a DoS condition on a remotely managed router.
This vulnerability is due to improper error handling. An attacker could exploit this vulnerability by submitting crafted input to the web-based management interface. A successful exploit could allow the attacker to request unauthorized files from a remote router, causing the router to reload and resulting in a DoS condition. |
| A vulnerability in the web UI of Cisco Unity Connection Web Inbox could allow an unauthenticated, remote attacker to conduct SSRF attacks through an affected device.
This vulnerability is due to improper input validation for specific HTTP requests. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected device. A successful exploit could allow the attacker to send arbitrary network requests that are sourced from the affected device. |
| A vulnerability in the web-based management interface of Cisco Unity Connection could allow an authenticated, remote attacker to execute arbitrary code on an affected device.
This vulnerability is due to insufficient validation of user-supplied input. An attacker could exploit this vulnerability by submitting a crafted API request. A successful exploit could allow the attacker to execute arbitrary code as root, possibly resulting in the complete compromise of a targeted device. To exploit this vulnerability, the attacker must have valid user credentials on the affected device. |
| In the Linux kernel, the following vulnerability has been resolved:
fbcon: check return value of con2fb_acquire_newinfo()
If fbcon_open() fails when called from con2fb_acquire_newinfo() then
info->fbcon_par pointer remains NULL which is later dereferenced.
Add check for return value of the function con2fb_acquire_newinfo() to
avoid it.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/pm: Fix null pointer dereference issue
If SMU is disabled, during RAS initialization,
there will be null pointer dereference issue here. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mtk-mdp: Fix error handling in probe function
Add mtk_mdp_unregister_m2m_device() on the error handling path to prevent
resource leak.
Add check for the return value of vpu_get_plat_device() to prevent null
pointer dereference. And vpu_get_plat_device() increases the reference
count of the returned platform device. Add platform_device_put() to
prevent reference leak. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: ring-buffer: Fix to check event length before using
Check the event length before adding it for accessing next index in
rb_read_data_buffer(). Since this function is used for validating
possibly broken ring buffers, the length of the event could be broken.
In that case, the new event (e + len) can point a wrong address.
To avoid invalid memory access at boot, check whether the length of
each event is in the possible range before using it. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Add SRCU protection for reading PDPTRs in __get_sregs2()
Add SRCU read-side protection when reading PDPTR registers in
__get_sregs2().
Reading PDPTRs may trigger access to guest memory:
kvm_pdptr_read() -> svm_cache_reg() -> load_pdptrs() ->
kvm_vcpu_read_guest_page() -> kvm_vcpu_gfn_to_memslot()
kvm_vcpu_gfn_to_memslot() dereferences memslots via __kvm_memslots(),
which uses srcu_dereference_check() and requires either kvm->srcu or
kvm->slots_lock to be held. Currently only vcpu->mutex is held,
triggering lockdep warning:
=============================
WARNING: suspicious RCU usage in kvm_vcpu_gfn_to_memslot
6.12.59+ #3 Not tainted
include/linux/kvm_host.h:1062 suspicious rcu_dereference_check() usage!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
1 lock held by syz.5.1717/15100:
#0: ff1100002f4b00b0 (&vcpu->mutex){+.+.}-{3:3}, at: kvm_vcpu_ioctl+0x1d5/0x1590
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0xf0/0x120 lib/dump_stack.c:120
lockdep_rcu_suspicious+0x1e3/0x270 kernel/locking/lockdep.c:6824
__kvm_memslots include/linux/kvm_host.h:1062 [inline]
__kvm_memslots include/linux/kvm_host.h:1059 [inline]
kvm_vcpu_memslots include/linux/kvm_host.h:1076 [inline]
kvm_vcpu_gfn_to_memslot+0x518/0x5e0 virt/kvm/kvm_main.c:2617
kvm_vcpu_read_guest_page+0x27/0x50 virt/kvm/kvm_main.c:3302
load_pdptrs+0xff/0x4b0 arch/x86/kvm/x86.c:1065
svm_cache_reg+0x1c9/0x230 arch/x86/kvm/svm/svm.c:1688
kvm_pdptr_read arch/x86/kvm/kvm_cache_regs.h:141 [inline]
__get_sregs2 arch/x86/kvm/x86.c:11784 [inline]
kvm_arch_vcpu_ioctl+0x3e20/0x4aa0 arch/x86/kvm/x86.c:6279
kvm_vcpu_ioctl+0x856/0x1590 virt/kvm/kvm_main.c:4663
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl fs/ioctl.c:893 [inline]
__x64_sys_ioctl+0x18b/0x210 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xbd/0x1d0 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Found by Linux Verification Center (linuxtesting.org) with Syzkaller. |
| In the Linux kernel, the following vulnerability has been resolved:
net: Drop the lock in skb_may_tx_timestamp()
skb_may_tx_timestamp() may acquire sock::sk_callback_lock. The lock must
not be taken in IRQ context, only softirq is okay. A few drivers receive
the timestamp via a dedicated interrupt and complete the TX timestamp
from that handler. This will lead to a deadlock if the lock is already
write-locked on the same CPU.
Taking the lock can be avoided. The socket (pointed by the skb) will
remain valid until the skb is released. The ->sk_socket and ->file
member will be set to NULL once the user closes the socket which may
happen before the timestamp arrives.
If we happen to observe the pointer while the socket is closing but
before the pointer is set to NULL then we may use it because both
pointer (and the file's cred member) are RCU freed.
Drop the lock. Use READ_ONCE() to obtain the individual pointer. Add a
matching WRITE_ONCE() where the pointer are cleared. |
| A vulnerability has been found in D-Link DI-8100 16.07.26A1. This vulnerability affects the function sprintf of the file /user_group.asp of the component CGI Handler. The manipulation leads to buffer overflow. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. |
| Nginx UI is a web user interface for the Nginx web server. From version 2.0.0 to before version 2.3.8, an unauthenticated network attacker can claim the initial administrator account on a fresh nginx-ui instance during the first-run setup window. The public /api/install endpoint is reachable without authentication, and the request-encryption flow only protects payload confidentiality in transit; it does not authenticate who is allowed to perform installation. A remote attacker who reaches the service before the legitimate operator can set the admin email, username, and password, causing permanent initial-instance takeover. This issue has been patched in version 2.3.8. |
| Crypt::SecretBuffer versions before 0.019 for Perl is suseceptible to timing attacks.
For example, if Crypt::SecretBuffer was used to store and compare plaintext passwords, then discrepencies in timing could be used to guess the secret password. |
