| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in auxiliary asynchronous port (AUX) functions of Cisco IOS XE Software could allow an authenticated, local attacker to cause an affected device to reload or stop responding.
This vulnerability is due to the incorrect handling of specific ingress traffic when flow control hardware is enabled on the AUX port. An attacker could exploit this vulnerability by reverse telnetting to the AUX port and sending specific data after connecting. A successful exploit could allow the attacker to cause the device to reset or stop responding, resulting in a denial of service (DoS) condition. |
| A vulnerability in the Locator ID Separation Protocol (LISP) feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload.
This vulnerability is due to the incorrect handling of LISP packets. An attacker could exploit this vulnerability by sending a crafted LISP packet to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a denial of service (DoS) condition.
Note: This vulnerability could be exploited over either IPv4 or IPv6 transport. |
| There is a low severity open redirect vulnerability within affected versions of Bitbucket Data Center. Versions of Bitbucket DC from 8.0.0 to 8.9.12 and 8.19.0 to 8.19.1 are affected by this vulnerability. It is patched in 8.9.13 and 8.19.2.
This open redirect vulnerability, with a CVSS Score of 3.1 and a CVSS Vector of CVSS:3.0/AV:N/AC:H/PR:N/UI:R/S:U/C:L/I:N/A:N, allows an unauthenticated attacker to redirect a victim user upon login to Bitbucket Data Center to any arbitrary site which can be utilized for further exploitation which has low impact to confidentiality, no impact to integrity, no impact to availability, and requires user interaction.
Atlassian recommends that Bitbucket Data Center customers upgrade to the version. If you are unable to do so, upgrade your instance to one of the supported fixed versions. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, sockmap: Don't let sock_map_{close,destroy,unhash} call itself
sock_map proto callbacks should never call themselves by design. Protect
against bugs like [1] and break out of the recursive loop to avoid a stack
overflow in favor of a resource leak.
[1] https://lore.kernel.org/all/00000000000073b14905ef2e7401@google.com/ |
| A vulnerability in the IPv4 Software-Defined Access (SD-Access) fabric edge node feature of Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause high CPU utilization and stop all traffic processing, resulting in a denial of service (DoS) condition on an affected device.
This vulnerability is due to improper handling of certain IPv4 packets. An attacker could exploit this vulnerability by sending certain IPv4 packets to an affected device. A successful exploit could allow the attacker to cause the device to exhaust CPU resources and stop processing traffic, resulting in a DoS condition. |
| A vulnerability in the data model interface (DMI) services of Cisco IOS XE Software could allow an unauthenticated, remote attacker to access resources that should have been protected by a configured IPv4 access control list (ACL).
This vulnerability is due to improper handling of error conditions when a successfully authorized device administrator updates an IPv4 ACL using the NETCONF or RESTCONF protocol, and the update would reorder access control entries (ACEs) in the updated ACL. An attacker could exploit this vulnerability by accessing resources that should have been protected across an affected device. |
| This Medium severity ACE (Arbitrary Code Execution) vulnerability was introduced in version 4.2.8 of Sourcetree for Mac.
This ACE (Arbitrary Code Execution) vulnerability, with a CVSS Score of 5.9, allows a locally authenticated attacker to execute arbitrary code which has high impact to confidentiality, high impact to integrity, high impact to availability, and requires user interaction.
Atlassian recommends that Sourcetree for Mac users upgrade to the latest version. If you are unable to do so, upgrade your instance to one of the specified supported fixed versions. See the release notes https://www.sourcetreeapp.com/download-archives .
You can download the latest version of Sourcetree for Mac from the download center https://www.sourcetreeapp.com/download-archives .
This vulnerability was found through the Atlassian Bug Bounty Program by Karol Mazurek (AFINE). |
| A vulnerability in the CLI of Cisco IOS XE Software could allow an authenticated, low-privileged, local attacker to access WLAN configuration details including passwords.
This vulnerability is due to improper privilege checks. An attacker could exploit this vulnerability by using the show and show tech wireless CLI commands to access configuration details, including passwords. A successful exploit could allow the attacker to access configuration details that they are not authorized to access. |
| A vulnerability in the IKEv1 fragmentation code of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a heap overflow, resulting in an affected device reloading.
This vulnerability exists because crafted, fragmented IKEv1 packets are not properly reassembled. An attacker could exploit this vulnerability by sending crafted UDP packets to an affected system. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a DoS condition.
Note: Only traffic that is directed to the affected system can be used to exploit this vulnerability. This vulnerability can be triggered by IPv4 and IPv6 traffic. |
| A timing attack vulnerability exists in the gradio-app/gradio repository, specifically within the login function in routes.py. The vulnerability arises from the use of a direct comparison operation (`app.auth[username] == password`) to validate user credentials, which can be exploited to guess passwords based on response times. Successful exploitation of this vulnerability could allow an attacker to bypass authentication mechanisms and gain unauthorized access. |
| Versions of the package z-push/z-push-dev before 2.7.6 are vulnerable to SQL Injection due to unparameterized queries in the IMAP backend. An attacker can inject malicious commands by manipulating the username field in basic authentication. This allows the attacker to access and potentially modify or delete sensitive data from a linked third-party database.
**Note:** This vulnerability affects Z-Push installations that utilize the IMAP backend and have the IMAP_FROM_SQL_QUERY option configured.
Mitigation
Change configuration to use the default or LDAP in backend/imap/config.php
php
define('IMAP_DEFAULTFROM', '');
or
php
define('IMAP_DEFAULTFROM', 'ldap'); |
| The Bonanza – WooCommerce Free Gifts Lite plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the xlo_optin_call() function in all versions up to, and including, 1.0.0. This makes it possible for authenticated attackers, with Subscriber-level access and above, to set the opt in status to success. |
| The YouTube Embed plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘instance’ parameter in all versions up to, and including, 10.3 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Magical Addons For Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's Custom Attributes in all versions up to, and including, 1.3.8 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Sky Addons for Elementor plugin for WordPress is vulnerable to Stored Cross-Site Scripting via Multiple widgets in all versions up to, and including, 3.1.4 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| "SwitchBot" App for iOS/Android contains an insertion of sensitive information into log file vulnerability in versions V6.24 through V9.12. If this vulnerability is exploited, sensitive user information may be exposed to an attacker who has access to the application logs. |
| Improper Neutralization of Input During Web Page Generation (XSS or 'Cross-site Scripting') vulnerability in DECE Software Geodi allows Cross-Site Scripting (XSS).This issue affects Geodi: before GEODI Setup 9.0.146. |
| Improper Neutralization of CRLF Sequences ('CRLF Injection') vulnerability in DECE Software Geodi allows HTTP Request Splitting.This issue affects Geodi: before GEODI Setup 9.0.146. |
| The Hydra Booking plugin for WordPress is vulnerable to Privilege Escalation due to a missing capability check on the tfhb_reset_password_callback() function in versions 1.1.0 to 1.1.18. This makes it possible for authenticated attackers, with Subscriber-level access and above, to reset the password of an Administrator user, achieving full privilege escalation. |
| VMware vCenter contains a denial-of-service vulnerability. A malicious actor who is authenticated through vCenter and has permission to perform API calls for guest OS customisation may trigger this vulnerability to create a denial-of-service condition. |
