| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Fix page reassignment overflow in af_alg_pull_tsgl
When page reassignment was added to af_alg_pull_tsgl the original
loop wasn't updated so it may try to reassign one more page than
necessary.
Add the check to the reassignment so that this does not happen.
Also update the comment which still refers to the obsolete offset
argument. |
| Inefficient Algorithmic Complexity vulnerability in absinthe-graphql absinthe allows unauthenticated denial of service via quadratic fragment-name uniqueness validation.
'Elixir.Absinthe.Phase.Document.Validation.UniqueFragmentNames':run/2 iterates over all fragments and for each one calls duplicate?/2, which evaluates Enum.count(fragments, &(&1.name == name)) — a full linear scan of the fragment list. The result is O(N²) comparisons per document, where N is the number of fragment definitions supplied by the caller.
Because input.fragments is built directly from the GraphQL query body, N is fully attacker-controlled. A minimum-size fragment definition is roughly 16 bytes, so a ~1 MB document carries ~60,000 fragments and forces ~3.6 × 10⁹ comparisons inside this single validation phase. No authentication, schema knowledge, or special configuration is required.
This issue affects absinthe: from 1.2.0 before 1.10.2. |
| In the Linux kernel, the following vulnerability has been resolved:
soc/tegra: pmc: Fix unsafe generic_handle_irq() call
Currently, when resuming from system suspend on Tegra platforms,
the following warning is observed:
WARNING: CPU: 0 PID: 14459 at kernel/irq/irqdesc.c:666
Call trace:
handle_irq_desc+0x20/0x58 (P)
tegra186_pmc_wake_syscore_resume+0xe4/0x15c
syscore_resume+0x3c/0xb8
suspend_devices_and_enter+0x510/0x540
pm_suspend+0x16c/0x1d8
The warning occurs because generic_handle_irq() is being called from
a non-interrupt context which is considered as unsafe.
Fix this warning by deferring generic_handle_irq() call to an IRQ work
which gets executed in hard IRQ context where generic_handle_irq()
can be called safely.
When PREEMPT_RT kernels are used, regular IRQ work (initialized with
init_irq_work) is deferred to run in per-CPU kthreads in preemptible
context rather than hard IRQ context. Hence, use the IRQ_WORK_INIT_HARD
variant so that with PREEMPT_RT kernels, the IRQ work is processed in
hardirq context instead of being deferred to a thread which is required
for calling generic_handle_irq().
On non-PREEMPT_RT kernels, both init_irq_work() and IRQ_WORK_INIT_HARD()
execute in IRQ context, so this change has no functional impact for
standard kernel configurations.
[treding@nvidia.com: miscellaneous cleanups] |
| CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the DNS-over-QUIC (DoQ) server can be driven into unbounded goroutine and memory growth by a remote client that opens many QUIC streams and sends only 1 byte per stream. When the worker pool is full, CoreDNS still spawns a goroutine per accepted stream to wait for a worker token. Additionally, active workers block indefinitely in io.ReadFull() with no per-stream read deadline, allowing an attacker to pin all workers by sending a single byte so the read blocks waiting for the second byte of the DoQ length prefix. This enables an unauthenticated remote attacker to cause memory exhaustion and OOM-kill. This issue has been fixed in version 1.14.3. No known workarounds exist. |
| CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the DNS-over-HTTPS (DoH) GET path accepts oversized dns= query parameter values and performs URL query parsing, base64 decoding, and DNS message unpacking before rejecting the request. Unlike the POST path, which applies a bounded read via http.MaxBytesReader limited to 65536 bytes, the GET path has no equivalent size validation before expensive processing. A remote, unauthenticated attacker can repeatedly send oversized DoH GET requests to force high CPU usage, large transient memory allocations, and elevated garbage-collection pressure, leading to denial of service. This issue has been fixed in version 1.14.3. |
| CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the tsig plugin can be bypassed on non-plain-DNS transports (DoT, DoH, DoH3, DoQ, and gRPC) because it trusts the transport writer's TsigStatus() instead of performing verification itself. The DoH and DoH3 writer's TsigStatus() always returns nil, the DoT server does not set TsigSecret on the dns.Server, and the DoQ and gRPC writers also unconditionally return nil. This allows an unauthenticated remote client to bypass TSIG-based authentication and access resources intended to be restricted behind a tsig require all policy. Plain DNS over TCP and UDP are not affected. This issue has been fixed in version 1.14.3. |
| In the Linux kernel, the following vulnerability has been resolved:
media: mtk-mdp: Fix error handling in probe function
Add mtk_mdp_unregister_m2m_device() on the error handling path to prevent
resource leak.
Add check for the return value of vpu_get_plat_device() to prevent null
pointer dereference. And vpu_get_plat_device() increases the reference
count of the returned platform device. Add platform_device_put() to
prevent reference leak. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nSVM: Remove a user-triggerable WARN on nested_svm_load_cr3() succeeding
Drop the WARN in svm_set_nested_state() on nested_svm_load_cr3() failing
as it is trivially easy to trigger from userspace by modifying CPUID after
loading CR3. E.g. modifying the state restoration selftest like so:
--- tools/testing/selftests/kvm/x86/state_test.c
+++ tools/testing/selftests/kvm/x86/state_test.c
@@ -280,7 +280,16 @@ int main(int argc, char *argv[])
/* Restore state in a new VM. */
vcpu = vm_recreate_with_one_vcpu(vm);
- vcpu_load_state(vcpu, state);
+
+ if (stage == 4) {
+ state->sregs.cr3 = BIT(44);
+ vcpu_load_state(vcpu, state);
+
+ vcpu_set_cpuid_property(vcpu, X86_PROPERTY_MAX_PHY_ADDR, 36);
+ __vcpu_nested_state_set(vcpu, &state->nested);
+ } else {
+ vcpu_load_state(vcpu, state);
+ }
/*
* Restore XSAVE state in a dummy vCPU, first without doing
generates:
WARNING: CPU: 30 PID: 938 at arch/x86/kvm/svm/nested.c:1877 svm_set_nested_state+0x34a/0x360 [kvm_amd]
Modules linked in: kvm_amd kvm irqbypass [last unloaded: kvm]
CPU: 30 UID: 1000 PID: 938 Comm: state_test Tainted: G W 6.18.0-rc7-58e10b63777d-next-vm
Tainted: [W]=WARN
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:svm_set_nested_state+0x34a/0x360 [kvm_amd]
Call Trace:
<TASK>
kvm_arch_vcpu_ioctl+0xf33/0x1700 [kvm]
kvm_vcpu_ioctl+0x4e6/0x8f0 [kvm]
__x64_sys_ioctl+0x8f/0xd0
do_syscall_64+0x61/0xad0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
Simply delete the WARN instead of trying to prevent userspace from shoving
"illegal" state into CR3. For better or worse, KVM's ABI allows userspace
to set CPUID after SREGS, and vice versa, and KVM is very permissive when
it comes to guest CPUID. I.e. attempting to enforce the virtual CPU model
when setting CPUID could break userspace. Given that the WARN doesn't
provide any meaningful protection for KVM or benefit for userspace, simply
drop it even though the odds of breaking userspace are minuscule.
Opportunistically delete a spurious newline. |
| CoreDNS is a DNS server that chains plugins. In versions prior to 1.14.3, the transfer plugin can select the wrong ACL stanza when both a parent zone and a more-specific subzone are configured. The longestMatch() function in plugin/transfer/transfer.go uses a lexicographic string comparison instead of an actual longest-suffix match to select the winning zone. As a result, a permissive parent-zone transfer rule can override a restrictive subzone rule depending on zone name ordering (e.g., "example.org." > "a.example.org." lexicographically). This allows an unauthorized remote client to perform AXFR/IXFR for the subzone and retrieve its full zone contents. This issue has been fixed in version 1.14.3. |
| CoreDNS is a DNS server written in Go. In versions prior to 1.14.3, the gRPC, QUIC, DoH, and DoH3 transport implementations incorrectly handle TSIG authentication. For gRPC and QUIC, the server checks whether the TSIG key name exists in the configuration but never calls dns.TsigVerify() to validate the HMAC. If the key name matches a configured key, the tsigStatus field remains nil and the tsig plugin treats the request as successfully authenticated regardless of the MAC value. For DoH and DoH3, the issue is more severe: the DoHWriter.TsigStatus() method unconditionally returns nil, and the server never inspects the TSIG record at all. Any request containing a TSIG record is treated as authenticated over DoH and DoH3, even if the key name is invalid and the MAC is arbitrary.
An unauthenticated network attacker can exploit this to bypass TSIG-protected functionality such as AXFR/IXFR zone transfers, dynamic DNS updates, or other TSIG-gated plugin behavior. The DoH and DoH3 variants have a lower exploitation bar because the attacker does not need to know a valid TSIG key name.
This issue has been fixed in version 1.14.3. As a workaround, disable gRPC, QUIC, DoH, and DoH3 listeners where TSIG authentication is required, or restrict network-level access to affected transport ports to trusted sources only. |
| An exploitable SQL injection vulnerability exists in the authenticated part of ERPNext v10.1.6. Specially crafted web requests can cause SQL injections resulting in data compromise. The searchfield parameter can be used to perform an SQL injection attack. An attacker can use a browser to trigger these vulnerabilities, and no special tools are required. |
| An exploitable SQL injection vulnerability exists in the authenticated part of ERPNext v10.1.6. Specially crafted web requests can cause SQL injections resulting in data compromise. The employee and sort_order parameter can be used to perform an SQL injection attack. An attacker can use a browser to trigger these vulnerabilities, and no special tools are required. |
| An exploitable SQL injection vulnerability exists in the authenticated part of ERPNext v10.1.6. Specially crafted web requests can cause SQL injections resulting in data compromise. The sort_by and start parameter can be used to perform an SQL injection attack. An attacker can use a browser to trigger these vulnerabilities, and no special tools are required. |
| An exploitable SQL injection vulnerability exists in the authenticated part of ERPNext v10.1.6. Specially crafted web requests can cause SQL injections resulting in data compromise. The order_by parameter can be used to perform an SQL injection attack. An attacker can use a browser to trigger these vulnerabilities, and no special tools are required. |
| telnetd in GNU inetutils through 2.7 allows an out-of-bounds write in the LINEMODE SLC (Set Local Characters) suboption handler because add_slc does not check whether the buffer is full. |
| In the Linux kernel, the following vulnerability has been resolved:
drm: Account property blob allocations to memcg
DRM_IOCTL_MODE_CREATEPROPBLOB allows userspace to allocate arbitrary-sized
property blobs backed by kernel memory.
Currently, the blob data allocation is not accounted to the allocating
process's memory cgroup, allowing unprivileged users to trigger unbounded
kernel memory consumption and potentially cause system-wide OOM.
Mark the property blob data allocation with GFP_KERNEL_ACCOUNT so that the memory
is properly charged to the caller's memcg. This ensures existing cgroup
memory limits apply and prevents uncontrolled kernel memory growth without
introducing additional policy or per-file limits. |
| phpseclib is a PHP secure communications library. Projects using versions 0.1.1 through 1.0.26, 2.0.0 through 2.0.51, and 3.0.0 through 3.0.49 are vulnerable to a to padding oracle timing attack when using AES in CBC mode. This issue has been fixed in versions 1.0.27, 2.0.52 and 3.0.50. |
| phpseclib is a PHP secure communications library. Starting in 0.1.1 and prior to 3.0.51, 2.0.53, and 1.0.28, phpseclib\Net\SSH2::get_binary_packet() uses PHP's != operator to compare a received SSH packet HMAC against the locally computed HMAC. != on equal-length binary strings in PHP uses memcmp(), which short-circuits on the first differing byte. This is a real variable-time comparison (CWE-208), proven by scaling benchmarks. This vulnerability is fixed in 3.0.51, 2.0.53, and 1.0.28. |
| Wazuh Manager authd service in wazuh-manager packages through version 4.7.3 contains an improper restriction of client-initiated SSL/TLS renegotiation vulnerability that allows remote attackers to cause a denial of service by sending excessive renegotiation requests. Attackers can exploit the lack of renegotiation limits to consume CPU resources and render the authd service unavailable. |
| MailEnable versions prior to 10.55 contain a reflected cross-site scripting vulnerability in the webmail interface that allows remote attackers to execute arbitrary JavaScript in a victim's browser by crafting a malicious URL. Attackers can inject malicious code through the StartDate parameter in the FreeBusy.aspx form, which is not properly sanitized before being embedded into dynamically generated JavaScript. |
