| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| kubewarden-controller is a Kubernetes controller that allows you to dynamically register Kubewarden admission policies. By design, AdmissionPolicy and AdmissionPolicyGroup can evaluate only namespaced resources. The resources to be evaluated are determined by the rules provided by the user when defining the policy. There might be Kubernetes namespaced resources that should not be validated by AdmissionPolicy and by the AdmissionPolicyGroup policies because of their sensitive nature. For example, PolicyReport are namespaced resources that contain the list of non compliant objects found inside of a namespace. An attacker can use either an AdmissionPolicy or an AdmissionPolicyGroup to prevent the creation and update of PolicyReport objects to hide non-compliant resources. Moreover, the same attacker might use a mutating AdmissionPolicy to alter the contents of the PolicyReport created inside of the namespace. Starting from the 1.21.0 release, the validation rules applied to AdmissionPolicy and AdmissionPolicyGroup have been tightened to prevent them from validating sensitive types of namespaced resources. |
| xrpl.js is a JavaScript/TypeScript API for interacting with the XRP Ledger in Node.js and the browser. Versions 4.2.1, 4.2.2, 4.2.3, and 4.2.4 of xrpl.js were compromised and contained malicious code designed to exfiltrate private keys. Version 2.14.2 is also malicious, though it is less likely to lead to exploitation as it is not compatible with other 2.x versions. Anyone who used one of these versions should stop immediately and rotate any private keys or secrets used with affected systems. Users of xrpl.js should pgrade to version 4.2.5 or 2.14.3 to receive a patch. To secure funds, think carefully about whether any keys may have been compromised by this supply chain attack, and mitigate by sending funds to secure wallets, and/or rotating keys. If any account's master key is potentially compromised, disable the key. |
| A vulnerability in the OTRS Admin Interface and Agent Interface (versions before OTRS 8) allow parameter injection due to for an autheniticated agent or admin user.
This issue affects:
* OTRS 7.0.X
* OTRS 8.0.X
* OTRS 2023.X
* OTRS 2024.X
* OTRS 2025.X
* ((OTRS)) Community Edition: 6.0.x
Products based on the ((OTRS)) Community Edition also very likely to be affected |
| CWE-1188: Initialization of a Resource with an Insecure Default vulnerability exists that could lead to loss of
confidentiality when a malicious user, having physical access, sets the radio in factory default mode where the
product does not correctly initialize all data. |
| Improper Limitation of a Pathname to a Restricted Directory ('Path Traversal') vulnerability in Crocoblock JetThemeCore jet-theme-core.This issue affects JetThemeCore: from n/a through < 2.2.1. |
| The Web and WooCommerce Addons for WPBakery Builder plugin for WordPress is vulnerable to unauthorized plugin settings modification due to a missing capability check on several plugin functions in all versions up to, and including, 1.4.5. This makes it possible for authenticated attackers, with Subscriber-level access and above, to change some of the plugin settings. |
| A denial-of-service vulnerability exists in the affected products. The vulnerability could allow a remote, non-privileged user to send malicious requests resulting in a major nonrecoverable fault causing a denial-of-service. |
| Quest KACE Systems Management Appliance (SMA) 13.0.x before 13.0.385, 13.1.x before 13.1.81, 13.2.x before 13.2.183, 14.0.x before 14.0.341 (Patch 5), and 14.1.x before 14.1.101 (Patch 4) contains an authentication bypass vulnerability that allows attackers to impersonate legitimate users without valid credentials. The vulnerability exists in the SSO authentication handling mechanism and can lead to complete administrative takeover. |
| A Local Code Execution Vulnerability exists in the product and version listed above. The vulnerability is due to a default setting in Windows and allows access to the Command Prompt as a higher privileged user. |
| Improper Neutralization of Special Elements used in an SQL Command ('SQL Injection') vulnerability in M A Vinoth Kumar Frontend Dashboard frontend-dashboard allows SQL Injection.This issue affects Frontend Dashboard: from n/a through <= 2.2.5. |
| The PowerPress Podcasting plugin by Blubrry plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the ‘media_url’ parameter in all versions up to, and including, 11.9.10 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The Schema Scalpel plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the post title in all versions up to, and including, 1.6.1 due to insufficient input sanitization and output escaping when outputting user-supplied data into JSON-LD schema markup. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| A Remote Code Execution Vulnerability exists in the product and version listed above. The vulnerability is due to lack of input sanitation and could allow a remote attacker to run commands or code as a high privileged user. |
| Quest KACE Systems Management Appliance (SMA) 13.0.x before 13.0.385, 13.1.x before 13.1.81, 13.2.x before 13.2.183, 14.0.x before 14.0.341 (Patch 5), and 14.1.x before 14.1.101 (Patch 4) allows unauthenticated users to upload backup files to the system. While signature validation is implemented, weaknesses in the validation process can be exploited to upload malicious backup content that could compromise system integrity. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bcsp: receive data only if registered
Currently, bcsp_recv() can be called even when the BCSP protocol has not
been registered. This leads to a NULL pointer dereference, as shown in
the following stack trace:
KASAN: null-ptr-deref in range [0x0000000000000108-0x000000000000010f]
RIP: 0010:bcsp_recv+0x13d/0x1740 drivers/bluetooth/hci_bcsp.c:590
Call Trace:
<TASK>
hci_uart_tty_receive+0x194/0x220 drivers/bluetooth/hci_ldisc.c:627
tiocsti+0x23c/0x2c0 drivers/tty/tty_io.c:2290
tty_ioctl+0x626/0xde0 drivers/tty/tty_io.c:2706
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:907 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0x3b0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
To prevent this, ensure that the HCI_UART_REGISTERED flag is set before
processing received data. If the protocol is not registered, return
-EUNATCH. |
| An Incorrect Permission Assignment Vulnerability exists in the product and version listed above. The vulnerability is due to incorrect permissions being assigned to the remote debugger port and can allow for unauthenticated access to the system configuration. |
| DPA countermeasures are unavailable for ECDH key agreement and EdDSA signing operations on Curve25519 and Curve448 on all Series 2 modules and SoCs due to a lack of hardware and software support. A successful DPA attack may result in exposure of confidential information. The best practice is to use the impacted crypto curves and operations with ephemeral keys to reduce the number of DPA traces that can be collected. |
| A Local Code Injection Vulnerability exists in the product and version listed above. The vulnerability is due to incorrect default permissions and allows for DLLs to be executed with higher level permissions. |
| The Xagio SEO – AI Powered SEO plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the ‘HTTP_REFERER’ parameter in all versions up to, and including, 7.1.0.16 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. The vulnerability was partially patched in version 7.1.0.0. |
| In the Linux kernel, the following vulnerability has been resolved:
amd/amdkfd: resolve a race in amdgpu_amdkfd_device_fini_sw
There is race in amdgpu_amdkfd_device_fini_sw and interrupt.
if amdgpu_amdkfd_device_fini_sw run in b/w kfd_cleanup_nodes and
kfree(kfd), and KGD interrupt generated.
kernel panic log:
BUG: kernel NULL pointer dereference, address: 0000000000000098
amdgpu 0000:c8:00.0: amdgpu: Requesting 4 partitions through PSP
PGD d78c68067 P4D d78c68067
kfd kfd: amdgpu: Allocated 3969056 bytes on gart
PUD 1465b8067 PMD @
Oops: @002 [#1] SMP NOPTI
kfd kfd: amdgpu: Total number of KFD nodes to be created: 4
CPU: 115 PID: @ Comm: swapper/115 Kdump: loaded Tainted: G S W OE K
RIP: 0010:_raw_spin_lock_irqsave+0x12/0x40
Code: 89 e@ 41 5c c3 cc cc cc cc 66 66 2e Of 1f 84 00 00 00 00 00 OF 1f 40 00 Of 1f 44% 00 00 41 54 9c 41 5c fa 31 cO ba 01 00 00 00 <fO> OF b1 17 75 Ba 4c 89 e@ 41 Sc
89 c6 e8 07 38 5d
RSP: 0018: ffffc90@1a6b0e28 EFLAGS: 00010046
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000018
0000000000000001 RSI: ffff8883bb623e00 RDI: 0000000000000098
ffff8883bb000000 RO8: ffff888100055020 ROO: ffff888100055020
0000000000000000 R11: 0000000000000000 R12: 0900000000000002
ffff888F2b97da0@ R14: @000000000000098 R15: ffff8883babdfo00
CS: 010 DS: 0000 ES: 0000 CRO: 0000000080050033
CR2: 0000000000000098 CR3: 0000000e7cae2006 CR4: 0000000002770ce0
0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
0000000000000000 DR6: 00000000fffeO7FO DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<IRQ>
kgd2kfd_interrupt+@x6b/0x1f@ [amdgpu]
? amdgpu_fence_process+0xa4/0x150 [amdgpu]
kfd kfd: amdgpu: Node: 0, interrupt_bitmap: 3 YcpxFl Rant tErace
amdgpu_irq_dispatch+0x165/0x210 [amdgpu]
amdgpu_ih_process+0x80/0x100 [amdgpu]
amdgpu: Virtual CRAT table created for GPU
amdgpu_irq_handler+0x1f/@x60 [amdgpu]
__handle_irq_event_percpu+0x3d/0x170
amdgpu: Topology: Add dGPU node [0x74a2:0x1002]
handle_irq_event+0x5a/@xcO
handle_edge_irq+0x93/0x240
kfd kfd: amdgpu: KFD node 1 partition @ size 49148M
asm_call_irq_on_stack+0xf/@x20
</IRQ>
common_interrupt+0xb3/0x130
asm_common_interrupt+0x1le/0x40
5.10.134-010.a1i5000.a18.x86_64 #1 |
