| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Wazuh authd contains a heap-buffer overflow vulnerability that allows attackers to cause memory corruption and malformed heap data by sending specially crafted input. Attackers can exploit this vulnerability to trigger a denial of service condition, resulting in low availability impact to the authentication daemon. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/rsrc: reject zero-length fixed buffer import
validate_fixed_range() admits buf_addr at the exact end of the
registered region when len is zero, because the check uses strict
greater-than (buf_end > imu->ubuf + imu->len). io_import_fixed()
then computes offset == imu->len, which causes the bvec skip logic
to advance past the last bio_vec entry and read bv_offset from
out-of-bounds slab memory.
Return early from io_import_fixed() when len is zero. A zero-length
import has no data to transfer and should not walk the bvec array
at all.
BUG: KASAN: slab-out-of-bounds in io_import_reg_buf+0x697/0x7f0
Read of size 4 at addr ffff888002bcc254 by task poc/103
Call Trace:
io_import_reg_buf+0x697/0x7f0
io_write_fixed+0xd9/0x250
__io_issue_sqe+0xad/0x710
io_issue_sqe+0x7d/0x1100
io_submit_sqes+0x86a/0x23c0
__do_sys_io_uring_enter+0xa98/0x1590
Allocated by task 103:
The buggy address is located 12 bytes to the right of
allocated 584-byte region [ffff888002bcc000, ffff888002bcc248) |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (tps53679) Fix array access with zero-length block read
i2c_smbus_read_block_data() can return 0, indicating a zero-length
read. When this happens, tps53679_identify_chip() accesses buf[ret - 1]
which is buf[-1], reading one byte before the buffer on the stack.
Fix by changing the check from "ret < 0" to "ret <= 0", treating a
zero-length read as an error (-EIO), which prevents the out-of-bounds
array access.
Also fix a typo in the adjacent comment: "if present" instead of
duplicate "if". |
| Illustrator versions 29.8.6, 30.3 and earlier are affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_conntrack_h323: fix OOB read in decode_choice()
In decode_choice(), the boundary check before get_len() uses the
variable `len`, which is still 0 from its initialization at the top of
the function:
unsigned int type, ext, len = 0;
...
if (ext || (son->attr & OPEN)) {
BYTE_ALIGN(bs);
if (nf_h323_error_boundary(bs, len, 0)) /* len is 0 here */
return H323_ERROR_BOUND;
len = get_len(bs); /* OOB read */
When the bitstream is exactly consumed (bs->cur == bs->end), the check
nf_h323_error_boundary(bs, 0, 0) evaluates to (bs->cur + 0 > bs->end),
which is false. The subsequent get_len() call then dereferences
*bs->cur++, reading 1 byte past the end of the buffer. If that byte
has bit 7 set, get_len() reads a second byte as well.
This can be triggered remotely by sending a crafted Q.931 SETUP message
with a User-User Information Element containing exactly 2 bytes of
PER-encoded data ({0x08, 0x00}) to port 1720 through a firewall with
the nf_conntrack_h323 helper active. The decoder fully consumes the
PER buffer before reaching this code path, resulting in a 1-2 byte
heap-buffer-overflow read confirmed by AddressSanitizer.
Fix this by checking for 2 bytes (the maximum that get_len() may read)
instead of the uninitialized `len`. This matches the pattern used at
every other get_len() call site in the same file, where the caller
checks for 2 bytes of available data before calling get_len(). |
| In PHP versions 8.2.* before 8.2.31, 8.3.* before 8.3.31, 8.4.* before 8.4.21, and 8.5.* before 8.5.6, some functions, including urldecode(), pass signed char to ctype functions (like isxdigit()). On the systems with default signed char and optimized table-lookup ctype functions - such as NetBSD - this can lead to accessing array with negative offset, which can trigger a denial of service. |
| In PHP versions 8.2.* before 8.2.31, 8.3.* before 8.3.31, 8.4.* before 8.4.21, and 8.5.* before 8.5.6, the metaphone() function in ext/standard/metaphone.c uses a signed int variable to track the current position within the input string. If a string longer than 2,147,483,647 bytes is passed, a signed integer overflow occurs, resulting in undefined behavior. This can lead to an out-of-bounds read, causing a segmentation fault or access to unrelated memory, and may affect the availability of the PHP process. |
| In PHP versions 8.4.* before 8.4.21 and 8.5.* before 8.5.6, when an encoding name containing an embedded NUL byte is passed to mb_convert_encoding() or related mbstring functions, the code incorrectly assumes that when strncasecmp() returns 0 it means the strings have the same length. This can lead to out-of-bounds read of global memory, potentially causing a crash or information disclosure or crash. Affected functions include mb_convert_encoding(), mb_detect_encoding(), mb_convert_variables(), and mb_detect_order(), as well as the mbstring.detect_order and mbstring.http_output INI settings. |
| A heap-based out-of-bounds read vulnerability in the DNSSEC validation of dnsmasq allows remote attackers to cause a denial of service via a crafted DNS packet. |
| In GStreamer through 1.26.1, the isomp4 plugin's qtdemux_parse_trak function may read past the end of a heap buffer while parsing an MP4 file, possibly leading to information disclosure. |
| In the Linux kernel, the following vulnerability has been resolved:
i40e: Fix potential invalid access when MAC list is empty
list_first_entry() never returns NULL - if the list is empty, it still
returns a pointer to an invalid object, leading to potential invalid
memory access when dereferenced.
Fix this by using list_first_entry_or_null instead of list_first_entry. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: fix OOB read/write in network-coding decode
batadv_nc_skb_decode_packet() trusts coded_len and checks only against
skb->len. XOR starts at sizeof(struct batadv_unicast_packet), reducing
payload headroom, and the source skb length is not verified, allowing an
out-of-bounds read and a small out-of-bounds write.
Validate that coded_len fits within the payload area of both destination
and source sk_buffs before XORing. |
| In the Linux kernel, the following vulnerability has been resolved:
iio: imu: bno055: fix OOB access of hw_xlate array
Fix a potential out-of-bounds array access of the hw_xlate array in
bno055.c.
In bno055_get_regmask(), hw_xlate was iterated over the length of the
vals array instead of the length of the hw_xlate array. In the case of
bno055_gyr_scale, the vals array is larger than the hw_xlate array,
so this could result in an out-of-bounds access. In practice, this
shouldn't happen though because a match should always be found which
breaks out of the for loop before it iterates beyond the end of the
hw_xlate array.
By adding a new hw_xlate_len field to the bno055_sysfs_attr, we can be
sure we are iterating over the correct length. |
| In the Linux kernel, the following vulnerability has been resolved:
media: venus: Add a check for packet size after reading from shared memory
Add a check to ensure that the packet size does not exceed the number of
available words after reading the packet header from shared memory. This
ensures that the size provided by the firmware is safe to process and
prevent potential out-of-bounds memory access. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: pcl726: Prevent invalid irq number
The reproducer passed in an irq number(0x80008000) that was too large,
which triggered the oob.
Added an interrupt number check to prevent users from passing in an irq
number that was too large.
If `it->options[1]` is 31, then `1 << it->options[1]` is still invalid
because it shifts a 1-bit into the sign bit (which is UB in C).
Possible solutions include reducing the upper bound on the
`it->options[1]` value to 30 or lower, or using `1U << it->options[1]`.
The old code would just not attempt to request the IRQ if the
`options[1]` value were invalid. And it would still configure the
device without interrupts even if the call to `request_irq` returned an
error. So it would be better to combine this test with the test below. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Limit access to parser->buffer when trace_get_user failed
When the length of the string written to set_ftrace_filter exceeds
FTRACE_BUFF_MAX, the following KASAN alarm will be triggered:
BUG: KASAN: slab-out-of-bounds in strsep+0x18c/0x1b0
Read of size 1 at addr ffff0000d00bd5ba by task ash/165
CPU: 1 UID: 0 PID: 165 Comm: ash Not tainted 6.16.0-g6bcdbd62bd56-dirty
Hardware name: linux,dummy-virt (DT)
Call trace:
show_stack+0x34/0x50 (C)
dump_stack_lvl+0xa0/0x158
print_address_description.constprop.0+0x88/0x398
print_report+0xb0/0x280
kasan_report+0xa4/0xf0
__asan_report_load1_noabort+0x20/0x30
strsep+0x18c/0x1b0
ftrace_process_regex.isra.0+0x100/0x2d8
ftrace_regex_release+0x484/0x618
__fput+0x364/0xa58
____fput+0x28/0x40
task_work_run+0x154/0x278
do_notify_resume+0x1f0/0x220
el0_svc+0xec/0xf0
el0t_64_sync_handler+0xa0/0xe8
el0t_64_sync+0x1ac/0x1b0
The reason is that trace_get_user will fail when processing a string
longer than FTRACE_BUFF_MAX, but not set the end of parser->buffer to 0.
Then an OOB access will be triggered in ftrace_regex_release->
ftrace_process_regex->strsep->strpbrk. We can solve this problem by
limiting access to parser->buffer when trace_get_user failed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: asix_devices: Fix PHY address mask in MDIO bus initialization
Syzbot reported shift-out-of-bounds exception on MDIO bus initialization.
The PHY address should be masked to 5 bits (0-31). Without this
mask, invalid PHY addresses could be used, potentially causing issues
with MDIO bus operations.
Fix this by masking the PHY address with 0x1f (31 decimal) to ensure
it stays within the valid range. |
| In the Linux kernel, the following vulnerability has been resolved:
smb3: fix for slab out of bounds on mount to ksmbd
With KASAN enabled, it is possible to get a slab out of bounds
during mount to ksmbd due to missing check in parse_server_interfaces()
(see below):
BUG: KASAN: slab-out-of-bounds in
parse_server_interfaces+0x14ee/0x1880 [cifs]
Read of size 4 at addr ffff8881433dba98 by task mount/9827
CPU: 5 UID: 0 PID: 9827 Comm: mount Tainted: G
OE 6.16.0-rc2-kasan #2 PREEMPT(voluntary)
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: Dell Inc. Precision Tower 3620/0MWYPT,
BIOS 2.13.1 06/14/2019
Call Trace:
<TASK>
dump_stack_lvl+0x9f/0xf0
print_report+0xd1/0x670
__virt_addr_valid+0x22c/0x430
? parse_server_interfaces+0x14ee/0x1880 [cifs]
? kasan_complete_mode_report_info+0x2a/0x1f0
? parse_server_interfaces+0x14ee/0x1880 [cifs]
kasan_report+0xd6/0x110
parse_server_interfaces+0x14ee/0x1880 [cifs]
__asan_report_load_n_noabort+0x13/0x20
parse_server_interfaces+0x14ee/0x1880 [cifs]
? __pfx_parse_server_interfaces+0x10/0x10 [cifs]
? trace_hardirqs_on+0x51/0x60
SMB3_request_interfaces+0x1ad/0x3f0 [cifs]
? __pfx_SMB3_request_interfaces+0x10/0x10 [cifs]
? SMB2_tcon+0x23c/0x15d0 [cifs]
smb3_qfs_tcon+0x173/0x2b0 [cifs]
? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs]
? cifs_get_tcon+0x105d/0x2120 [cifs]
? do_raw_spin_unlock+0x5d/0x200
? cifs_get_tcon+0x105d/0x2120 [cifs]
? __pfx_smb3_qfs_tcon+0x10/0x10 [cifs]
cifs_mount_get_tcon+0x369/0xb90 [cifs]
? dfs_cache_find+0xe7/0x150 [cifs]
dfs_mount_share+0x985/0x2970 [cifs]
? check_path.constprop.0+0x28/0x50
? save_trace+0x54/0x370
? __pfx_dfs_mount_share+0x10/0x10 [cifs]
? __lock_acquire+0xb82/0x2ba0
? __kasan_check_write+0x18/0x20
cifs_mount+0xbc/0x9e0 [cifs]
? __pfx_cifs_mount+0x10/0x10 [cifs]
? do_raw_spin_unlock+0x5d/0x200
? cifs_setup_cifs_sb+0x29d/0x810 [cifs]
cifs_smb3_do_mount+0x263/0x1990 [cifs] |
| In the Linux kernel, the following vulnerability has been resolved:
hfs: fix slab-out-of-bounds in hfs_bnode_read()
This patch introduces is_bnode_offset_valid() method that checks
the requested offset value. Also, it introduces
check_and_correct_requested_length() method that checks and
correct the requested length (if it is necessary). These methods
are used in hfs_bnode_read(), hfs_bnode_write(), hfs_bnode_clear(),
hfs_bnode_copy(), and hfs_bnode_move() with the goal to prevent
the access out of allocated memory and triggering the crash. |
| In the Linux kernel, the following vulnerability has been resolved:
hfsplus: fix slab-out-of-bounds in hfsplus_bnode_read()
The hfsplus_bnode_read() method can trigger the issue:
[ 174.852007][ T9784] ==================================================================
[ 174.852709][ T9784] BUG: KASAN: slab-out-of-bounds in hfsplus_bnode_read+0x2f4/0x360
[ 174.853412][ T9784] Read of size 8 at addr ffff88810b5fc6c0 by task repro/9784
[ 174.854059][ T9784]
[ 174.854272][ T9784] CPU: 1 UID: 0 PID: 9784 Comm: repro Not tainted 6.16.0-rc3 #7 PREEMPT(full)
[ 174.854281][ T9784] Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 174.854286][ T9784] Call Trace:
[ 174.854289][ T9784] <TASK>
[ 174.854292][ T9784] dump_stack_lvl+0x10e/0x1f0
[ 174.854305][ T9784] print_report+0xd0/0x660
[ 174.854315][ T9784] ? __virt_addr_valid+0x81/0x610
[ 174.854323][ T9784] ? __phys_addr+0xe8/0x180
[ 174.854330][ T9784] ? hfsplus_bnode_read+0x2f4/0x360
[ 174.854337][ T9784] kasan_report+0xc6/0x100
[ 174.854346][ T9784] ? hfsplus_bnode_read+0x2f4/0x360
[ 174.854354][ T9784] hfsplus_bnode_read+0x2f4/0x360
[ 174.854362][ T9784] hfsplus_bnode_dump+0x2ec/0x380
[ 174.854370][ T9784] ? __pfx_hfsplus_bnode_dump+0x10/0x10
[ 174.854377][ T9784] ? hfsplus_bnode_write_u16+0x83/0xb0
[ 174.854385][ T9784] ? srcu_gp_start+0xd0/0x310
[ 174.854393][ T9784] ? __mark_inode_dirty+0x29e/0xe40
[ 174.854402][ T9784] hfsplus_brec_remove+0x3d2/0x4e0
[ 174.854411][ T9784] __hfsplus_delete_attr+0x290/0x3a0
[ 174.854419][ T9784] ? __pfx_hfs_find_1st_rec_by_cnid+0x10/0x10
[ 174.854427][ T9784] ? __pfx___hfsplus_delete_attr+0x10/0x10
[ 174.854436][ T9784] ? __asan_memset+0x23/0x50
[ 174.854450][ T9784] hfsplus_delete_all_attrs+0x262/0x320
[ 174.854459][ T9784] ? __pfx_hfsplus_delete_all_attrs+0x10/0x10
[ 174.854469][ T9784] ? rcu_is_watching+0x12/0xc0
[ 174.854476][ T9784] ? __mark_inode_dirty+0x29e/0xe40
[ 174.854483][ T9784] hfsplus_delete_cat+0x845/0xde0
[ 174.854493][ T9784] ? __pfx_hfsplus_delete_cat+0x10/0x10
[ 174.854507][ T9784] hfsplus_unlink+0x1ca/0x7c0
[ 174.854516][ T9784] ? __pfx_hfsplus_unlink+0x10/0x10
[ 174.854525][ T9784] ? down_write+0x148/0x200
[ 174.854532][ T9784] ? __pfx_down_write+0x10/0x10
[ 174.854540][ T9784] vfs_unlink+0x2fe/0x9b0
[ 174.854549][ T9784] do_unlinkat+0x490/0x670
[ 174.854557][ T9784] ? __pfx_do_unlinkat+0x10/0x10
[ 174.854565][ T9784] ? __might_fault+0xbc/0x130
[ 174.854576][ T9784] ? getname_flags.part.0+0x1c5/0x550
[ 174.854584][ T9784] __x64_sys_unlink+0xc5/0x110
[ 174.854592][ T9784] do_syscall_64+0xc9/0x480
[ 174.854600][ T9784] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 174.854608][ T9784] RIP: 0033:0x7f6fdf4c3167
[ 174.854614][ T9784] Code: f0 ff ff 73 01 c3 48 8b 0d 26 0d 0e 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 08
[ 174.854622][ T9784] RSP: 002b:00007ffcb948bca8 EFLAGS: 00000206 ORIG_RAX: 0000000000000057
[ 174.854630][ T9784] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f6fdf4c3167
[ 174.854636][ T9784] RDX: 00007ffcb948bcc0 RSI: 00007ffcb948bcc0 RDI: 00007ffcb948bd50
[ 174.854641][ T9784] RBP: 00007ffcb948cd90 R08: 0000000000000001 R09: 00007ffcb948bb40
[ 174.854645][ T9784] R10: 00007f6fdf564fc0 R11: 0000000000000206 R12: 0000561e1bc9c2d0
[ 174.854650][ T9784] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 174.854658][ T9784] </TASK>
[ 174.854661][ T9784]
[ 174.879281][ T9784] Allocated by task 9784:
[ 174.879664][ T9784] kasan_save_stack+0x20/0x40
[ 174.880082][ T9784] kasan_save_track+0x14/0x30
[ 174.880500][ T9784] __kasan_kmalloc+0xaa/0xb0
[ 174.880908][ T9784] __kmalloc_noprof+0x205/0x550
[ 174.881337][ T9784] __hfs_bnode_create+0x107/0x890
[ 174.881779][ T9784] hfsplus_bnode_find+0x2d0/0xd10
[ 174.882222][ T9784] hfsplus_brec_find+0x2b0/0x520
[ 174.882659][ T9784] hfsplus_delete_all_attrs+0x23b/0x3
---truncated--- |
