| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: dfl-afu: validate DMA mapping length in afu_dma_map_region()
afu_ioctl_dma_map() accepts a 64-bit length from userspace via
DFL_FPGA_PORT_DMA_MAP ioctl without an upper bound check. The value
is passed to afu_dma_pin_pages() where npages is derived as
length >> PAGE_SHIFT and passed to pin_user_pages_fast() which takes
int nr_pages, causing implicit truncation if length is very large.
Validate map.length at the ioctl entry point before calling
afu_dma_map_region(), rejecting values whose page count exceeds
INT_MAX. |
| Heap-based buffer overflow in Windows Bind Filter Driver allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Do not call map->ops->elt_free() if elt_alloc() fails
In paths where tracing_map_elt_alloc() failed to allocate objects,
the map->ops->elt_alloc() call was never successful. In this case,
map->ops->elt_free() should not be called. |
| In the Linux kernel, the following vulnerability has been resolved:
kho: skip KHO for crash kernel
kho_fill_kimage() unconditionally populates the kimage with KHO
metadata for every kexec image type. When the image is a crash kernel,
this can be problematic as the crash kernel can run in a small reserved
region and the KHO scratch areas can sit outside it.
The crash kernel then faults during kho_memory_init() when it
tries phys_to_virt() on the KHO FDT address:
Unable to handle kernel paging request at virtual address xxxxxxxx
...
fdt_offset_ptr+...
fdt_check_node_offset_+...
fdt_first_property_offset+...
fdt_get_property_namelen_+...
fdt_getprop+...
kho_memory_init+...
mm_core_init+...
start_kernel+...
kho_locate_mem_hole() already skips KHO logic for KEXEC_TYPE_CRASH
images, but kho_fill_kimage() was missing the same guard. As
kho_fill_kimage() is the single point that populates image->kho.fdt
and image->kho.scratch, fixing it here is sufficient for both arm64
and x86 as the FDT and boot_params path are bailing out when these
fields are unset. |
| Integer overflow or wraparound in Windows HTTP.sys allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Kernel allows an authorized attacker to elevate privileges locally. |
| Loofah is a general library for manipulating and transforming HTML/XML documents and fragments, built on top of Nokogiri. From 2.25.0 until 2.25.2, Loofah::HTML5::Scrub.allowed_uri? does not reject javascript: URIs whose scheme is split or prefixed with the HTML5 named whitespace character references 	 or 
. CGI.unescapeHTML leaves those references intact, so allowed_uri? reports the URL safe even though a browser decodes and strips the tab or line feed and executes the resulting javascript: URL. This issue affects only callers that pass HTML-encoded strings directly to allowed_uri?; Loofah's default sanitize() path is not affected. This issue is fixed in version 2.25.2. |
| Flowise before 3.1.3 contains a sandbox escape vulnerability in pythonCodeValidator.ts that fails to block native Pandas DataFrame methods like to_csv, to_json, pipe, and query. Authenticated attackers can exploit this to exfiltrate uploaded CSV data or write arbitrary files to the server filesystem. |
| Browserslist is a configuration tool for sharing target browsers and Node.js versions between front-end tools. Prior to 4.28.7, normalizeStats() in node.js, reached unconditionally through getStat() and loadStat() on every browserslist() call, processes untrusted browserslist-stats.json, opts.stats, and CLI --stats data with an unguarded for...in loop and plain-object bracket access and assignment, allowing inherited Object.prototype keys including __proto__, toString, valueOf, constructor, hasOwnProperty, and isPrototypeOf to cause an uncaught TypeError or modify the prototype of the returned normalized object. This issue is fixed in version 4.28.7. |
| libexpat before 2.8.3 has an out-of-bounds read and resultant infinite loop because low surrogates are treated the same as high surrogates during Unicode processing in the *_toUtf16 functions. |
| Gammu DCT3 trace file parser crash in 4.6.0 to 4.6.7 allows denial of service |
| TTX Logger file parser crash in 4.6.0 to 4.6.7 allows denial of service |
| @fastify/busboy is a multipart form-data parser. In versions 3.1.0 through 3.2.0, a remote unauthenticated attacker can stall the Node.js event loop by sending a multipart request whose boundary is crafted to a specific length. The vendored streaming search stores its skip table in a fixed 256 entry byte array, and a boundary of exactly 252 bytes makes the search needle 256 bytes, which truncates the default skip distance to zero and turns the search into a CPU bound loop on a small body. A single small request can keep one core busy and deny service to other requests handled by the same process. The issue is fixed in @fastify/busboy 3.2.1, which widens the skip table so the skip distance is preserved. Users should upgrade to 3.2.1. |
| An application using the MongoDB BI Connector ODBC Driver may experience a memory-safety issue when processing output parameters from a stored procedure. Triggering this issue requires connecting to an untrusted or impersonated database server that returns crafted metadata. This may result in process termination, disclosure of process memory, or, under certain conditions, arbitrary code execution. |
| In Teltonika Networks RUTOS devices, a vulnerability exists in modbusgwd
due to improper handling of Modbus TCP request data. A remote,
unauthenticated attacker with access to the affected service could
trigger a heap-based buffer overflow, resulting in a denial of service. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote authenticated attacker to inject arbitrary content into Navigator log files due to improper output neutralization for logs. |
| IBM Security Verify Access 10.0 through 10.0.9.2 and IBM Verify Identity Access 11.0 through 11.0.3 and IBM Verify Identity Access Container 11.0 through 11.0.3 contains a format string injection vulnerability in the management interface that allows attackers to cause denial of service and information disclosure by crafting a malicious HTTP request. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/ftrace: Relocate %rip-relative percpu refs in dynamic trampolines
With CONFIG_CALL_DEPTH_TRACKING enabled on an x86 retbleed-affected platform
(eg: Skylake), with retbleed=stuff, registering a dynamic ftrace trampoline
crashes on the first call into the traced function:
BUG: unable to handle page fault for address: ffff88817ae18880
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 4b53067 P4D 4b53067 PUD 0
Oops: Oops: 0002 [#1] SMP PTI
CPU: 3 UID: 0 PID: 187 Comm: usleep Not tainted 7.0.10 #243 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.17.0-2-2 04/01/2014
Code: 24 78 00 00 00 00 48 89 ea 48 89 54 24 20 48 8b b4 24 b8 00 00 00 48 8b bc 24 b0 00 00 00 48 89 bc 24 80 00 00 00 48 83 ef 05 <65> 48 c1 3d 1f a8 b6 02 05 48 8b 15 f6 00 00 00 4c 89 3c 24 4c 89
Call Trace:
<TASK>
? find_held_lock
? exc_page_fault
? lock_release
? __x64_sys_clock_nanosleep
? lockdep_hardirqs_on_prepare
? trace_hardirqs_on
__x64_sys_clock_nanosleep
do_syscall_64
? exc_page_fault
? call_depth_return_thunk
entry_SYSCALL_64_after_hwframe
...
Kernel panic - not syncing: Fatal exception
This small reproducer allows to easily trigger the crash:
# echo 'p __x64_sys_clock_nanosleep' > /sys/kernel/tracing/kprobe_events
# echo 1 > /sys/kernel/tracing/events/kprobes/p___x64_sys_clock_nanosleep_0/enable
# usleep 1
Monitoring the crash under GDB points to the exact instruction in charge of
incrementing the call depth:
sarq $5, %gs:__x86_call_depth(%rip)
This instruction matches the one inserted by the ftrace_regs_caller from
ftrace_64.S. This emitted code was likely working fine until the introduction
of
59bec00ace28 ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()"):
it has made the call depth accounting addressing relative to $rip, instead of
being based on an absolute address.
As this code exact location depends on where the trampoline lives in memory,
the corresponding displacement needs to be adjusted at runtime to actually
correctly find the per-cpu __x86_call_depth value, otherwise the targeted
address is wrong, leading to the page fault seen above.
Fix the %rip-relative displacement of the copied CALL_DEPTH_ACCOUNT
instruction (from ftrace_regs_caller) by calling text_poke_apply_relocation(),
as it is done for example by the x86 BPF JIT compiler through
x86_call_depth_emit_accounting(). This corrects both CALL_DEPTH_ACCOUNT slots,
in ftrace_caller and ftrace_regs_caller.
[ bp: Massage. ] |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: Bound used_lrs when flushing the pKVM hyp vCPU
flush_hyp_vcpu() copies the host vGIC state into the hyp's private vCPU
on every run. The vGIC list register save and restore use used_lrs as
their loop bound and expect it to stay within the number of implemented
list registers. While this is generally the case, flush_hyp_vcpu()
copies vgic_v3 verbatim and does not enforce this, so a value provided
by the host is used at EL2 to index vgic_lr[] and access ICH_LR<n>_EL2
(host -> EL2).
Fix by clamping used_lrs to the number of implemented list registers
after the copy, as the trusted path already does in
vgic_flush_lr_state(). The number of implemented list registers is
constant after init, so it is replicated once from
kvm_vgic_global_state.nr_lr into hyp_gicv3_nr_lr rather than read on
every entry. |
| In the Linux kernel, the following vulnerability has been resolved:
qed: fix double free in qed_cxt_tables_alloc()
If one of the later PF or VF CID bitmap allocations fails,
qed_cid_map_alloc() jumps to cid_map_fail and frees the previously
allocated CID bitmaps before returning an error. qed_cxt_tables_alloc()
then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free()
again.
Fix this by setting each CID bitmap pointer to NULL after bitmap_free()
to avoid double free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime reproduction was not attempted because exercising the failing
allocation path requires device-specific setup. |