| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
spi: fix resource leaks on device setup failure
Make sure to call controller cleanup() if spi_setup() fails while
registering a device to avoid leaking any resources allocated by
setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: control: Validate buf_len before strnlen() in snd_ctl_elem_init_enum_names()
snd_ctl_elem_init_enum_names() advances pointer p through the names
buffer while decrementing buf_len. If buf_len reaches zero but items
remain, the next iteration calls strnlen(p, 0).
While strnlen(p, 0) returns 0 and would hit the existing name_len == 0
error path, CONFIG_FORTIFY_SOURCE's fortified strnlen() first checks
maxlen against __builtin_dynamic_object_size(). When Clang loses track
of p's object size inside the loop, this triggers a BRK exception panic
before the return value is examined.
Add a buf_len == 0 guard at the loop entry to prevent calling fortified
strnlen() on an exhausted buffer.
Found by kernel fuzz testing through Xiaomi Smartphone. |
| In the Linux kernel, the following vulnerability has been resolved:
net: caif: clear client service pointer on teardown
`caif_connect()` can tear down an existing client after remote shutdown by
calling `caif_disconnect_client()` followed by `caif_free_client()`.
`caif_free_client()` releases the service layer referenced by
`adap_layer->dn`, but leaves that pointer stale.
When the socket is later destroyed, `caif_sock_destructor()` calls
`caif_free_client()` again and dereferences the freed service pointer.
Clear the client/service links before releasing the service object so
repeated teardown becomes harmless. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: afs: revert mmap_prepare() change
Partially reverts commit 9d5403b1036c ("fs: convert most other
generic_file_*mmap() users to .mmap_prepare()").
This is because the .mmap invocation establishes a refcount, but
.mmap_prepare is called at a point where a merge or an allocation failure
might happen after the call, which would leak the refcount increment.
Functionality is being added to permit the use of .mmap_prepare in this
case, but in the interim, we need to fix this. |
| Jenkins Credentials Binding Plugin 720.v3f6decef43ea_ and earlier does not properly sanitize file names for file and zip file credentials, allowing attackers able to provide credentials to a job to write files to arbitrary locations on the node filesystem, which can lead to remote code execution if Jenkins is configured to allow a low-privileged user to configure file or zip file credentials used for a job running on the built-in node. |
| Missing Authorization vulnerability in Benbodhi SVG Support allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects SVG Support: from n/a through 2.5.14. |
| When creating an export through the pretix API, API clients are
returned an UUID value for their export job (a long, random string like
35742818-c375-4d15-839f-d49aecce94d6). Using this UUID, the API client
can then request the actual file for download. The same kind of UUID is
used in other places in pretix when temporary files are generated for
internal use or download.
One remaining API endpoint, however, wrongfully did not verify if the
UUID used for download actually belongs to a file that is supposed to
be downloadable and belongs to the correct user. In reality, this is
hard to exploit because an attacker would need to have access to a valid
UUID for the file they desire which is unlikely to happen without a
separate security problem giving them access to logs etc. |
| Taipy 4.1.1, fixed in commit 129fd40, contains a path traversal vulnerability in the ElementLibrary.get_resource() method in taipy/gui/extension/library.py that allows unauthenticated attackers to escape the intended module directory by exploiting an incomplete path containment check using str.startswith() without a trailing path separator. Attackers can send crafted GET requests with path traversal segments targeting a prefix-matching sibling directory on disk, bypassing the directory containment check because Flask's path converter and Werkzeug's WSGI layer preserve the traversal segments while the resolved path still satisfies the flawed startswith comparison, enabling unauthorized file access outside the intended library directory. |
| Missing Authorization vulnerability in Prasad Kirpekar WP Meta and Date Remover allows Exploiting Incorrectly Configured Access Control Security Levels.
This issue affects WP Meta and Date Remover: from n/a through 2.3.6. |
| go-git is an extensible git implementation library written in pure Go. Prior to 5.19.0 and 6.0.0-alpha.3, go-git may parse malformed Git objects in a way that differs from upstream Git. When commit or tag objects contain ambiguous or malformed headers, go-git’s decoded representation may expose values differently from how Git itself would interpret or reject the same object. Additionally, go-git’s commit signing and verification logic operates over commit data reconstructed from go-git’s parsed representation rather than the original raw object bytes. As a result, go-git may sign or verify a commit payload that is not byte-for-byte equivalent to the object stored in the repository. This can cause a signature to appear valid for a commit whose displayed or effective metadata differs from the object that was intended to be signed. This vulnerability is fixed in 5.19.0 and 6.0.0-alpha.3. |
| go-git is an extensible git implementation library written in pure Go. Prior to 5.19.1 and 6.0.0-alpha.4, go-git's SSH transport constructs the remote exec command by wrapping the repository path in single quotes without escaping single quotes embedded inside the path. A repository path containing a single quote can therefore break out of the quoted region in the exec command and be appended as additional shell tokens. This vulnerability is fixed in 5.19.1 and 6.0.0-alpha.4. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: caiaq: fix usb_dev refcount leak on probe failure
create_card() takes a reference on the USB device with usb_get_dev()
and stores the matching usb_put_dev() in card_free(), which is
installed as the snd_card's ->private_free destructor.
However, ->private_free is only assigned near the end of init_card(),
after several failure points (usb_set_interface(), EP type checks,
usb_submit_urb(), the EP1_CMD_GET_DEVICE_INFO exchange, and its
timeout). When any of those fail, init_card() returns an error to
snd_probe(), which calls snd_card_free(card). Because ->private_free
is still NULL, card_free() never runs, the usb_get_dev() reference
is not dropped, and the struct usb_device leaks along with its
descriptor allocations and device_private.
syzbot reproduces this with a malformed UAC3 device whose only valid
altsetting is 0; init_card()'s usb_set_interface(usb_dev, 0, 1) call
fails with -EIO and triggers the leak.
Move the ->private_free assignment into create_card(), immediately
after usb_get_dev(), so that every error path reaching snd_card_free()
balances the reference. card_free()'s callees (snd_usb_caiaq_input_free,
free_urbs, kfree) already tolerate the partially-initialized state
because the chip private area is zero-initialized by snd_card_new(). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: ctxfi: Add fallback to default RSR for S/PDIF
spdif_passthru_playback_get_resources() uses atc->pll_rate as the RSR
for the MSR calculation loop. However, pll_rate is only updated in
atc_pll_init() and not in hw_pll_init(), so it remains 0 after the
card init.
When spdif_passthru_playback_setup() skips atc_pll_init() for
32000 Hz, (rsr * desc.msr) always becomes 0, causing the loop to spin
indefinitely.
Add fallback to use atc->rsr when atc->pll_rate is 0. This reflects
the hardware state, since hw_card_init() already configures the PLL
to the default RSR. |
| In the Linux kernel, the following vulnerability has been resolved:
md/raid10: fix deadlock with check operation and nowait requests
When an array check is running it will raise the barrier at which point
normal requests will become blocked and increment the nr_pending value to
signal there is work pending inside of wait_barrier(). NOWAIT requests
do not block and so will return immediately with an error, and additionally
do not increment nr_pending in wait_barrier(). Upstream change commit
43806c3d5b9b ("raid10: cleanup memleak at raid10_make_request") added a
call to raid_end_bio_io() to fix a memory leak when NOWAIT requests hit
this condition. raid_end_bio_io() eventually calls allow_barrier() and
it will unconditionally do an atomic_dec_and_test(&conf->nr_pending) even
though the corresponding increment on nr_pending didn't happen in the
NOWAIT case.
This can be easily seen by starting a check operation while an application
is doing nowait IO on the same array. This results in a deadlocked state
due to nr_pending value underflowing and so the md resync thread gets stuck
waiting for nr_pending to == 0.
Output of r10conf state of the array when we hit this condition:
crash> struct r10conf
barrier = 1,
nr_pending = {
counter = -41
},
nr_waiting = 15,
nr_queued = 0,
Example of md_sync thread stuck waiting on raise_barrier() and other
requests stuck in wait_barrier():
md1_resync
[<0>] raise_barrier+0xce/0x1c0
[<0>] raid10_sync_request+0x1ca/0x1ed0
[<0>] md_do_sync+0x779/0x1110
[<0>] md_thread+0x90/0x160
[<0>] kthread+0xbe/0xf0
[<0>] ret_from_fork+0x34/0x50
[<0>] ret_from_fork_asm+0x1a/0x30
kworker/u1040:2+flush-253:4
[<0>] wait_barrier+0x1de/0x220
[<0>] regular_request_wait+0x30/0x180
[<0>] raid10_make_request+0x261/0x1000
[<0>] md_handle_request+0x13b/0x230
[<0>] __submit_bio+0x107/0x1f0
[<0>] submit_bio_noacct_nocheck+0x16f/0x390
[<0>] ext4_io_submit+0x24/0x40
[<0>] ext4_do_writepages+0x254/0xc80
[<0>] ext4_writepages+0x84/0x120
[<0>] do_writepages+0x7a/0x260
[<0>] __writeback_single_inode+0x3d/0x300
[<0>] writeback_sb_inodes+0x1dd/0x470
[<0>] __writeback_inodes_wb+0x4c/0xe0
[<0>] wb_writeback+0x18b/0x2d0
[<0>] wb_workfn+0x2a1/0x400
[<0>] process_one_work+0x149/0x330
[<0>] worker_thread+0x2d2/0x410
[<0>] kthread+0xbe/0xf0
[<0>] ret_from_fork+0x34/0x50
[<0>] ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
landlock: Fix LOG_SUBDOMAINS_OFF inheritance across fork()
hook_cred_transfer() only copies the Landlock security blob when the
source credential has a domain. This is inconsistent with
landlock_restrict_self() which can set LOG_SUBDOMAINS_OFF on a
credential without creating a domain (via the ruleset_fd=-1 path): the
field is committed but not preserved across fork() because the child's
prepare_creds() calls hook_cred_transfer() which skips the copy when
domain is NULL.
This breaks the documented use case where a process mutes subdomain logs
before forking sandboxed children: the children lose the muting and
their domains produce unexpected audit records.
Fix this by unconditionally copying the Landlock credential blob. |
| In the Linux kernel, the following vulnerability has been resolved:
media: amphion: Fix race between m2m job_abort and device_run
Fix kernel panic caused by race condition where v4l2_m2m_ctx_release()
frees m2m_ctx while v4l2_m2m_try_run() is about to call device_run
with the same context.
Race sequence:
v4l2_m2m_try_run(): v4l2_m2m_ctx_release():
lock/unlock v4l2_m2m_cancel_job()
job_abort()
v4l2_m2m_job_finish()
kfree(m2m_ctx) <- frees ctx
device_run() <- use-after-free crash at 0x538
Crash trace:
Unable to handle kernel read from unreadable memory at virtual address
0000000000000538
v4l2_m2m_try_run+0x78/0x138
v4l2_m2m_device_run_work+0x14/0x20
The amphion vpu driver does not rely on the m2m framework's device_run
callback to perform encode/decode operations.
Fix the race by preventing m2m framework job scheduling entirely:
- Add job_ready callback returning 0 (no jobs ready for m2m framework)
- Remove job_abort callback to avoid the race condition |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: qat - fix IRQ cleanup on 6xxx probe failure
When adf_dev_up() partially completes and then fails, the IRQ
handlers registered during adf_isr_resource_alloc() are not detached
before the MSI-X vectors are released.
Since the device is enabled with pcim_enable_device(), calling
pci_alloc_irq_vectors() internally registers pcim_msi_release() as a
devres action. On probe failure, devres runs pcim_msi_release() which
calls pci_free_irq_vectors(), tearing down the MSI-X vectors while IRQ
handlers (for example 'qat0-bundle0') are still attached. This causes
remove_proc_entry() warnings:
[ 22.163964] remove_proc_entry: removing non-empty directory 'irq/143', leaking at least 'qat0-bundle0'
Moving the devm_add_action_or_reset() before adf_dev_up() does not solve
the problem since devres runs in LIFO order and pcim_msi_release(),
registered later inside adf_dev_up(), would still fire before
adf_device_down().
Fix by calling adf_dev_down() explicitly when adf_dev_up() fails, to
properly free IRQ handlers before devres releases the MSI-X vectors. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/shstk: Prevent deadlock during shstk sigreturn
During sigreturn the shadow stack signal frame is popped. The kernel does
this by reading the shadow stack using normal read accesses. When it can't
assume the memory is shadow stack, it takes extra steps to makes sure it is
reading actual shadow stack memory and not other normal readable memory. It
does this by holding the mmap read lock while doing the access and checking
the flags of the VMA.
Unfortunately that is not safe. If the read of the shadow stack sigframe
hits a page fault, the fault handler will try to recursively grab another
mmap read lock. This normally works ok, but if a writer on another CPU is
also waiting, the second read lock could fail and cause a deadlock.
Fix this by not holding mmap lock during the read access to userspace.
Instead use mmap_lock_speculate_...() to watch for changes between dropping
mmap lock and the userspace access. Retry if anything grabbed an mmap write
lock in between and could have changed the VMA.
These mmap_lock_speculate_...() helpers use mm::mm_lock_seq, which is only
available when PER_VMA_LOCK is configured. So make X86_USER_SHADOW_STACK
depend on it. On x86, PER_VMA_LOCK is a default configuration for SMP
kernels. So drop support for the other configs under the assumption that
the !SMP shadow stack user base does not exist.
Currently there is a check that skips the lookup work when the SSP can be
assumed to be on a shadow stack. While reorganizing the function, remove
the optimization to make the tricky code flows more common, such that
issues like this cannot escape detection for so long. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs3: add buffer boundary checks to run_unpack()
run_unpack() checks `run_buf < run_last` at the top of the while loop
but then reads size_size and offset_size bytes via run_unpack_s64()
without verifying they fit within the remaining buffer. A crafted NTFS
image with truncated run data in an MFT attribute triggers an OOB heap
read of up to 15 bytes when the filesystem is mounted.
Add boundary checks before each run_unpack_s64() call to ensure the
declared field size does not exceed the remaining buffer.
Found by fuzzing with a source-patched harness (LibAFL + QEMU). |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (powerz) Fix missing usb_kill_urb() on signal interrupt
wait_for_completion_interruptible_timeout() returns -ERESTARTSYS when
interrupted. This needs to abort the URB and return an error. No data
has been received from the device so any reads from the transfer
buffer are invalid.
The original code tests !ret, which only catches the timeout case (0).
On signal delivery (-ERESTARTSYS), !ret is false so the function skips
usb_kill_urb() and falls through to read from the unfilled transfer
buffer.
Fix by capturing the return value into a long (matching the function
return type) and handling signal (negative) and timeout (zero) cases
with separate checks that both call usb_kill_urb() before returning. |
