| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: fix reversed error cleanup order in ucopy functions
nouveau_uvmm_vm_bind_ucopy() and nouveau_exec_ucopy() place their error
cleanup labels in allocation order rather than reverse allocation order.
On a u_memcpya() failure for in_sync.s, the goto to err_free_ops (or
err_free_pushs) frees the first allocation and then falls through to
err_free_ins, which calls u_free() on args->in_sync.s.
Since args->in_sync.s still holds the ERR_PTR returned by the failed
u_memcpya(), and ERR_PTR values are not caught by ZERO_OR_NULL_PTR(),
kvfree() proceeds to dereference it, which can result in a kernel oops.
A failure for out_sync.s instead jumps to err_free_ins and skips freeing
the first allocation, leading to a memory leak.
Fix by swapping the cleanup label order so resources are freed in the
correct reverse allocation sequence. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: dummy_hcd: prevent fifo_req reuse during giveback
dummy_hcd embeds a single shared usb_request (dum->fifo_req) that the
"emulated single-request FIFO" fast-path in dummy_queue() reuses for
small IN transfers: it copies the caller's request into it
(req->req = *_req) and queues it, treating list_empty(&fifo_req.queue)
as "the slot is free".
The completion side (dummy_timer/transfer/nuke/dummy_dequeue) follows
the standard pattern: list_del_init(&req->queue) unlinks the request,
then the lock is dropped and usb_gadget_giveback_request() invokes
req->complete(). But list_del_init() makes fifo_req.queue look empty
*before* the completion callback returns, so a concurrent dummy_queue()
on another CPU sees the slot as free, reuses fifo_req and runs
req->req = *_req -- overwriting req->complete while dummy_timer is
mid-calling it. The indirect call then jumps to a clobbered pointer,
causing a general protection fault / page fault in dummy_timer
(syzkaller extid faf3a6cf579fc65591ca). The clobbering write is an
in-bounds memcpy on a live shared object, so KASAN cannot flag it.
Add a fifo_req_busy bit covering the shared request's whole lifetime:
set it in dummy_queue() when the FIFO fast-path takes fifo_req (making
it the fast-path guard, replacing the list_empty(&fifo_req.queue)
test), and clear it after the completion callback has returned, via a
dummy_giveback() helper used at all four gadget-request giveback
sites. The shared slot can no longer be reused until its completion
callback has finished. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: fix use-after-free in aggr_reset_state()
The aggr_reset_state() function uses timer_delete() (non-synchronous)
for the aggregation timer before proceeding to delete TID state and
before the structure is freed by callers like aggr_module_destroy().
If the timer callback (aggr_timeout) is executing when aggr_reset_state()
is called, the callback will continue to access aggr_conn fields like
rx_tid[] and stat[] which may be freed immediately after by
kfree(aggr_info->aggr_conn) in aggr_module_destroy().
Additionally, the timer callback can re-arm itself via mod_timer() while
aggr_reset_state() is running, creating a more complex race condition.
Use timer_delete_sync() instead to ensure any running timer callback
has completed before returning. |
| WatchGuard Fireware OS contains a race condition leading to a use-after-free vulnerability in LDAP authentication for the Mobile User VPN with IKEv2. A remote unauthenticated attacker could exploit this vulnerability to execute arbitrary code in the context of the iked process on Fireboxes that have a Mobile VPN with IKEv2 configured to use an external LDAP authentication server. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pt: Reset current_op in xe_pt_update_ops_init()
xe_pt_update_ops_init() fails to reset current_op to 0. On the
vm_bind path, ops_execute() calls xe_pt_update_ops_prepare() inside
the xe_validation_guard() / drm_exec_until_all_locked() loop. When
that loop retries due to lock contention or OOM eviction
(drm_exec_retry_on_contention() / xe_validation_retry_on_oom()),
xe_pt_update_ops_prepare() runs again on the same vops, and each
call to bind_op_prepare() increments current_op without resetting it.
After N retries current_op exceeds the array size allocated by
xe_vma_ops_alloc(), causing an out-of-bounds write into
SLUB-poisoned memory and a subsequent UAF crash in
xe_migrate_update_pgtables_cpu() when reading the corrupted pt_op->bind.
Also reset needs_svm_lock and needs_invalidation which are derived in
the same prepare pass and would otherwise cause wrong migrate ops
selection and redundant TLB invalidation on retry.
Fix this by resetting current_op, needs_svm_lock and needs_invalidation
in xe_pt_update_ops_init().
v2 (Matt):
- Add details in commit message.
- Add Fixes tag and Cc to stable@vger.kernel.org
(cherry picked from commit 046045543e530605c441063535e7dca0075369a6) |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: timer: drain a slave's callback before its master detaches it
snd_timer_close_locked() drains the closing instance's own in-flight
callback (IFLG_CALLBACK) before freeing it, but not its slaves'. When a
master instance is closed, remove_slave_links() clears each slave's
->timer; the slave's own close then reads timer == NULL and takes the
branch that skips the drain entirely (snd_timer_stop_slave() also no-ops
on a NULL timer). So a slave whose callback is still running when the
master is closed is freed underneath the live callback, leading to
use-after-free.
Drain the slaves too before remove_slave_links() severs them.
snd_timer_stop() has already taken this instance off the active list, so
no new slave callback can be queued. Take the slaves off the ack list so
a pending one can't fire either, then wait for any that is already in
flight. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix use-after-free freeing trigger private data
Commit 61d445af0a7c ("tracing: Add bulk garbage collection of freeing
event_trigger_data") moved the kfree() of event_trigger_data to a kthread
that runs tracepoint_synchronize_unregister() before freeing. That removed
the synchronization the trigger .free callbacks used to get implicitly and
inline from trigger_data_free().
event_hist_trigger_free(), event_hist_trigger_named_free() and
event_enable_trigger_free() free their satellite data (hist_data, cmd_ops,
enable_data) right after trigger_data_free() returns. With the
synchronization now deferred to the kthread, a concurrent tracepoint
handler can still reach that data through the list_del_rcu()'d trigger,
causing a use-after-free.
The histogram teardown must stay synchronous: remove_hist_vars() and
unregister_field_var_hists() have to detach a synthetic event from the
histogram before the trigger-removal write returns, otherwise a following
command races in and the synthetic-event removal fails with -EBUSY, as the
trigger-synthetic-eprobe.tc selftest catches. Make those callbacks wait
with the correct barrier - tracepoint_synchronize_unregister(), matching
the free kthread - before freeing.
The enable trigger has no such synchronous requirement, and a blocking
synchronize there would re-serialize the path that commit deliberately
deferred. Give it an optional private_data_free() callback that the free
kthread runs after its grace period, and free enable_data from there. |
| In the Linux kernel, the following vulnerability has been resolved:
rds: drop incoming messages that cross network namespace boundaries
rds_find_bound() looks up the destination socket using a global
rhashtable keyed solely on (addr, port, scope_id). Network namespaces
are not part of the key, so a sender in netns A can deliver an incoming
message (inc) to a socket that lives in a different netns B.
When this happens, inc->i_conn points to an rds_connection whose c_net
is netns A, but the receiving rs lives in netns B. Once the child
process that created netns A exits, cleanup_net() calls
rds_loop_exit_net() -> rds_loop_kill_conns() -> rds_conn_destroy(),
freeing that connection. If the survivor socket in netns B still holds
the inc, any subsequent dereference of inc->i_conn is a use-after-free.
There are two dangerous sites in rds_clear_recv_queue():
1. inc->i_conn->c_lcong (offset 88 of freed rds_connection, size 200)
read via rds_recv_rcvbuf_delta() -- confirmed by KASAN.
2. inc->i_conn->c_trans->inc_free(inc) (function pointer at offset 80)
called via rds_inc_put() when the inc refcount reaches zero -- same
race window, potential call-through-freed-object primitive.
The bug is reachable from unprivileged user namespaces
(CLONE_NEWUSER + CLONE_NEWNET), available since Linux 3.8.
Fix this by rejecting the delivery in rds_recv_incoming() when the
socket returned by rds_find_bound() belongs to a different network
namespace than the connection that carried the message. Use the
existing rds_conn_net() / sock_net() helpers and net_eq() for the
comparison. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (corsair-psu) Stop device IO before calling hid_hw_stop
hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
corsairpsu_probe(). If the probe operation fails after "io start" has
been initiated, this race condition will result in a uaf vulnerability
[1].
CPU0 CPU1
==== ====
corsairpsu_probe()
hid_device_io_start()
... unlock driver_input_lock
hid_hw_stop()
kfree(hidraw) __hid_input_report()
... acquire driver_input_lock
hid_report_raw_event()
hidraw_report_event()
... access hidraw's list_lock // trigger uaf
Consequently, when corsairpsu_probe() fails and hid_hw_stop() needs to
be executed, the io_started flag is first cleared while holding the
driver_input_lock to prevent potential race conditions involving input
reports.
[1]
BUG: KASAN: slab-use-after-free in rt_spin_lock+0x83/0x400 kernel/locking/spinlock_rt.c:56
Call Trace:
hidraw_report_event+0x5d/0x3a0 drivers/hid/hidraw.c:577
hid_report_raw_event+0x311/0x1730 drivers/hid/hid-core.c:2076
__hid_input_report drivers/hid/hid-core.c:2152 [inline]
hid_input_report+0x44e/0x580 drivers/hid/hid-core.c:2174
hid_irq_in+0x47e/0x6d0 drivers/hid/usbhid/hid-core.c:286
__usb_hcd_giveback_urb+0x3b3/0x5e0 drivers/usb/core/hcd.c:1657
dummy_timer+0x8a9/0x47d0 drivers/usb/gadget/udc/dummy_hcd.c:2005
Allocated by task 10:
hidraw_connect+0x57/0x430 drivers/hid/hidraw.c:606
hid_connect+0x5bf/0x19d0 drivers/hid/hid-core.c:2277
hid_hw_start+0xa8/0x120 drivers/hid/hid-core.c:2387
corsairpsu_probe+0xd9/0x3c0 drivers/hwmon/corsair-psu.c:782
Freed by task 10:
hidraw_disconnect+0x4f/0x60 drivers/hid/hidraw.c:662
hid_disconnect drivers/hid/hid-core.c:2362 [inline]
hid_hw_stop+0x101/0x1e0 drivers/hid/hid-core.c:2407
corsairpsu_probe+0x327/0x3c0 drivers/hwmon/corsair-psu.c:826
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop().
[groeck: Updated subject and description;
call hid_device_io_stop() only if IO has been started] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: revalidate LOAD_CONN_PARAM queued update
MGMT_OP_LOAD_CONN_PARAM queues conn_update_sync() when a single parameter
update changes an existing LE central connection. The queued work currently
stores a borrowed hci_conn_params entry from hdev->le_conn_params. A later
LOAD_CONN_PARAM request can clear disabled parameters and free that entry
before hci_cmd_sync_work() runs the queued callback.
Do not keep the borrowed hci_conn_params pointer in queued work. Queue the
hci_conn instead and hold a reference until the queued callback completes.
When the work runs, revalidate that the connection is still present, look
up the current hci_conn_params entry, and cancel the update if userspace
removed that entry while the work was pending.
Copy the interval values from the current params entry under hdev->lock,
then drop the lock and keep using hci_le_conn_update_sync() to issue the
update.
Validation reproduced this kernel report:
BUG: KASAN: slab-use-after-free in conn_update_sync+0x2a/0xf0 [bluetooth]
Read of size 1 at addr ffff88810c697126 by task kworker/u17:0/377
Workqueue: hci0 hci_cmd_sync_work [bluetooth]
Call Trace:
<TASK>
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x5f0
kasan_report+0xe0/0x110
conn_update_sync+0x2a/0xf0 [bluetooth]
hci_cmd_sync_work+0x187/0x210 [bluetooth]
process_one_work+0x4fd/0xbc0
worker_thread+0x2d8/0x570
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
ret_from_fork_asm+0x1a/0x30
Allocated by task 466:
hci_conn_params_add+0xa6/0x240 [bluetooth]
load_conn_param+0x4e1/0x850 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth]
Freed by task 474:
kfree+0x313/0x590
hci_conn_params_clear_disabled+0x9b/0xc0 [bluetooth]
load_conn_param+0x4bf/0x850 [bluetooth]
hci_sock_sendmsg+0x96b/0xf80 [bluetooth] |
| In the Linux kernel, the following vulnerability has been resolved:
amt: re-read skb header pointers after every pull
Several AMT receive and transmit paths cache a pointer into the skb head
(ip_hdr(), ipv6_hdr(), eth_hdr() or the AMT message header) and then call
a helper that can reallocate that head before the cached pointer is used
again. pskb_may_pull(), ip_mc_may_pull(), ipv6_mc_may_pull(),
iptunnel_pull_header(), ip_mc_check_igmp() and ipv6_mc_check_mld() can all
free the old head and move the data, so a pointer taken before the call
dangles afterwards and the later access is a use-after-free of the freed
head.
The affected sites are:
amt_rcv() caches ip_hdr() before amt_parse_type() pulls, then reads
iph->saddr.
amt_dev_xmit() caches ip_hdr()/ipv6_hdr() before ip_mc_check_igmp()/
ipv6_mc_check_mld() and pskb_may_pull(), then reads the group address.
amt_multicast_data_handler() caches eth_hdr() before pskb_may_pull(),
then writes the L2 header.
amt_membership_query_handler() caches the AMT header, the outer and
inner eth_hdr() and ip_hdr() before iptunnel_pull_header() and several
pulls, then reads and writes them.
amt_igmpv3_report_handler() and amt_mldv2_report_handler() cache
ip_hdr()/ipv6_hdr() and the current group record and read the record
count from the report header inside the record loop, across the
*_mc_may_pull() calls.
amt_update_handler() caches ip_hdr() and the AMT membership-update
header before pskb_may_pull(), iptunnel_pull_header(),
ip_mc_check_igmp() and the report handler, then reads iph->daddr and
amtmu->nonce / amtmu->response_mac.
Fix each site by either snapshotting the scalar that is used after the
pull before the first pull runs, or re-deriving the header pointer from
the skb after the last pull that can move the head. Values that are
stable across the pull (source and group address, the response MAC and
nonce, the record count, the outer source MAC) are snapshotted; pointers
that are written through or read repeatedly are re-derived. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: core: sysfs: add lock to bos_descriptors_read()
Add a lock to the function bos_descriptors_read().
This function accesses udev->bos, which could be simultaneously freed in
usb_reset_and_verify_device(), a function that is commonly called in
drivers all over the kernel. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/guc: Keep scheduler timeline name alive
The scheduler keeps a pointer to the timeline name, but q->name
is freed with the exec queue while scheduler fences can still
reference it.
Store the name in struct xe_guc_exec_queue so it shares
the scheduler's RCU-deferred lifetime.
(cherry picked from commit 41075f0eb5dcbd3b065d15f15ef7bbe9315188e8) |
| In the Linux kernel, the following vulnerability has been resolved:
net: airoha: Fix potential use-after-free in airoha_ppe_deinit()
airoha_ppe_deinit() replaces the NPU pointer with NULL via
rcu_replace_pointer() but does not wait for existing RCU readers
to exit before calling ppe_deinit() and airoha_npu_put(). This can
cause a use-after-free if a reader in an RCU read-side critical
section still holds a reference to the NPU when it is freed.
The init path (airoha_ppe_init) already calls synchronize_rcu()
after rcu_assign_pointer(), but the deinit path introduced in
commit 6abcf751bc08 ("net: airoha: Fix schedule while atomic in
airoha_ppe_deinit()") omitted the matching barrier when switching
from rcu_read_lock()/rcu_dereference() to rcu_replace_pointer().
Add synchronize_rcu() before ppe_deinit() to ensure all existing
RCU readers have completed before the NPU resources are released. |
| In the Linux kernel, the following vulnerability has been resolved:
net/iucv: take a reference on the socket found in afiucv_hs_rcv()
afiucv_hs_rcv() looks up the destination socket under iucv_sk_list.lock,
drops the lock, and then passes the socket to the afiucv_hs_callback_*()
handlers without holding a reference. AF_IUCV sockets are not
RCU-protected and are freed synchronously by iucv_sock_kill() ->
sock_put(), so a concurrent close can free the socket in the window
between read_unlock() and the handler, which then dereferences freed
memory (for example sk->sk_data_ready() in afiucv_hs_callback_syn()).
Take a reference with sock_hold() while the socket is still on the list
and release it with sock_put() once the handler has run. |
| In the Linux kernel, the following vulnerability has been resolved:
gpu: host1x: Fix use-after-free in host1x_bo_clear_cached_mappings
__host1x_bo_unpin() drops the last reference to the mapping and frees
it, so we can't dereference mapping afterwards. The cache itself
outlives the mapping, so use the cache local variable instead. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86/mmu: Fix use-after-free on vendor module reload
mmu_destroy_caches() destroys pte_list_desc_cache and
mmu_page_header_cache, but leaves both pointers unchanged. The pointers
live in kvm.ko, and therefore survive when a vendor module is unloaded
while kvm.ko remains loaded.
If creation of pte_list_desc_cache fails during a subsequent vendor
module load, its assignment sets pte_list_desc_cache to NULL and the
error path calls mmu_destroy_caches(). mmu_page_header_cache still
points to the cache destroyed during the preceding vendor module
unload. Passing that stale pointer to kmem_cache_destroy() causes a
slab use-after-free.
Reproduce the issue on a v7.1.3 kernel with CONFIG_KASAN=y,
CONFIG_KASAN_GENERIC=y, CONFIG_KVM=m, and CONFIG_KVM_INTEL=m. A
one-shot test hook forces pte_list_desc_cache to NULL on the second
invocation of kvm_mmu_vendor_module_init():
1. Load kvm.ko and kvm-intel.ko, creating both caches.
2. Unload only kvm_intel, leaving kvm.ko loaded.
3. Reload kvm_intel and force initialization through the -ENOMEM path.
KASAN reports:
BUG: KASAN: slab-use-after-free in
kvm_mmu_vendor_module_init+0x5b/0x170 [kvm]
...
kmem_cache_destroy+0x21/0x1d0
kvm_mmu_vendor_module_init+0x5b/0x170 [kvm]
...
Allocated by task 16817:
__kmem_cache_create_args+0x12c/0x3b0
__kmem_cache_create.constprop.0+0xb6/0xf0 [kvm]
kvm_mmu_vendor_module_init+0x13b/0x170 [kvm]
...
Freed by task 16820:
kmem_cache_destroy+0x117/0x1d0
kvm_mmu_vendor_module_exit+0x21/0x30 [kvm]
Clear both pointers immediately after destroying their caches so that
the stored state reflects the caches' lifetime and repeated cleanup is
safe.
With the fix applied, the same injected vendor module reload fails with
-ENOMEM as expected and produces no KASAN report. |
| In the Linux kernel, the following vulnerability has been resolved:
watchdog: pretimeout: Fix UAF in watchdog_unregister_governor()
When a watchdog governor is unregistered, it updates existing watchdog
devices that were using this governor by falling back to `default_gov`.
If the governor being unregistered is currently set as `default_gov`,
the `default_gov` is never cleared. This leads to 2 use-after-free
issues:
1. New watchdog devices registered after this point will inherit the
dangling `default_gov`.
2. Existing watchdog devices using the unregistered governor will have
their `wdd->gov` reassigned to the dangling `default_gov`.
Fix the UAF by clearing `default_gov` if it matches the governor being
unregistered. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (nzxt-kraken3) Stop device IO before calling hid_hw_stop
Calling hid_hw_stop() does not stop the device IO.
This results in a race condition between hid_input_report() and the point
immediately following the execution of hid_device_io_start() within
the driver probe function. If the probe operation fails after "io start"
has been initiated, this race condition will result in a UAF vulnerability.
Fix the problem by calling hid_device_io_stop() before calling
hid_hw_stop(). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: core: port: Deattach Type-C connector on component unbind
connector_unbind() is the mirror of connector_bind(), but it is missing
the symmetric call to typec_deattach() that connector_bind() makes via:
if (port_dev->child)
typec_attach(port_dev->connector, &port_dev->child->dev);
When a Thunderbolt dock is unplugged, two teardown paths race:
1. The component framework calls connector_unbind() first, which sets
port_dev->connector = NULL without calling typec_deattach(). This
leaves port->usb2_dev/port->usb3_dev in struct typec_port pointing at
the USB device that is about to be freed.
2. usb_disconnect() then calls typec_deattach(port_dev->connector, ...),
but port_dev->connector is already NULL, so the call is a no-op and
port->usb2_dev is never cleared.
3. Concurrently, UCSI detects a PD partner-disconnect event and calls
typec_unregister_partner(), which reads port->usb2_dev (now a dangling
pointer to freed memory) and passes it to typec_partner_unlink_device()
-> sysfs_remove_link() -> dev_name() on the freed device, corrupting
the typec/UCSI partner state.
This corruption leaves the Thunderbolt tunnel in an inconsistent state on
the next dock hot-plug. On affected hardware the dock's I225/igc NIC fails
to enumerate: AER fires a slot reset while the igc driver is still
initialising ("PCIe link lost"), and the subsequent igc_reset attempt hits
igc_rd32 on an already-detached device:
igc 0000:2e:00.0 eth0: PCIe link lost, device now detached
igc: Failed to read reg 0x0!
WARNING: CPU: 9 PID: 129 at drivers/net/ethernet/intel/igc/igc_main.c:7005
igc_rd32+0xa4/0xc0 [igc]
Call Trace:
igc_disable_pcie_master+0x16/0xa0 [igc]
igc_reset_hw_base+0x14/0x170 [igc]
igc_reset+0x63/0x110 [igc]
igc_io_slot_reset+0x9e/0xd0 [igc]
report_slot_reset+0x5d/0xc0
pcie_do_recovery+0x209/0x400
aer_isr_one_error_type+0x235/0x430
aer_isr+0x4e/0x80
irq_thread+0xf4/0x1f0
4. UCSI later handles the PD partner-disconnect and calls
typec_unregister_partner(), which still sees the stale port->usb2_dev
and tries to remove its sysfs link a second time:
kernfs: can not remove 'typec', no directory
WARNING: CPU: 6 PID: 55 at fs/kernfs/dir.c:1706 kernfs_remove_by_name_ns+0xe9/0xf0
Workqueue: events ucsi_handle_connector_change [typec_ucsi]
Call Trace:
sysfs_remove_link+0x19/0x50
typec_unregister_partner+0x6e/0x120 [typec]
ucsi_unregister_partner+0x107/0x150 [typec_ucsi]
ucsi_handle_connector_change+0x3ec/0x490 [typec_ucsi]
process_one_work+0x18e/0x3e0
worker_thread+0x2e3/0x420
kthread+0x10a/0x230
ret_from_fork+0x121/0x140
ret_from_fork_asm+0x1a/0x30
With worse timing the same stale pointer is dereferenced after the
backing memory is freed, turning the warning into a use-after-free.
Fix the asymmetry: call typec_deattach() before clearing
port_dev->connector, matching what connector_bind() does on the bind side.
typec_partner_deattach() is already protected by port->partner_link_lock,
so it serialises safely with the concurrent typec_unregister_partner() path. |
