| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Nimiq is a Rust implementation of the Nimiq Proof-of-Stake protocol based on the Albatross consensus algorithm. Prior to 1.6.0, a malicious state-sync peer can crash a syncing node by sending a crafted TrieChunk proof containing two TrieProofNode values with identical keys. TrieProof::verify calls TrieProofNode::child_index in primitives/src/trie/trie_proof_node.rs, where is_prefix_of accepts equal keys and KeyNibbles::get is called at the key length, returns None, and is unconditionally unwrapped. Untrusted ResponseChunk data reaches commit_chunks, put_chunk, and proof.verify before cryptographic proof validation, so the attacker does not need a valid proof. Exploitation requires the attacker to be selected as the victim's sync peer during state sync, and the resulting panic is transient because the node restarts and resynchronizes. This issue is fixed in version 1.6.0. |
| fastify is a fast and low-overhead web framework for Node.js. In versions before 5.12.5, when a route registers a response trailer via reply.trailer() and is served over HTTP/2, fastify unconditionally sets the Transfer-Encoding: chunked header, which is forbidden on HTTP/2, so Node.js throws while serializing the response headers. The exception is not caught and becomes an uncaughtException, so a single unauthenticated HTTP/2 request to any route that uses trailers crashes the server process and drops all in-flight requests, and it can be repeated on every restart. The issue is fixed in fastify 5.12.5, and users should upgrade to 5.12.5 or later. As a workaround, avoid registering response trailers with reply.trailer() on routes served over HTTP/2 until upgrading. |
| undici's dump interceptor reads and discards a response body up to a configurable maximum size. When a response declares a Content-Length that exceeds the maximum, the interceptor aborts cleanly, but when a response has no Content-Length and is chunked, the interceptor instead signals completion early once the accumulated size reaches the maximum, without pausing or aborting the request. Because the underlying parser keeps delivering body bytes, a second completion signal fires and trips an internal assertion, which aborts the request and tears down the connection. The application is left observing a misleading successful status with an empty or truncated body while the connection has actually been disconnected. This affects undici versions from 7.1.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2. |
| undici's experimental WebSocketStream client crashes the whole Node.js process when a remote peer closes the TCP connection without a WebSocket close handshake. On an unclean close the internal socket-close handler calls abort on the writable stream unconditionally and discards the returned promise, but per the WHATWG Streams standard aborting a locked writable returns a promise that rejects with a TypeError. Because the application holds a writer on that writable, which is the only way to write, the rejection is never observed and Node's default unhandled-rejection behavior terminates the process. An untrusted server can therefore crash a client with a single abrupt disconnect, with no authentication and no application mistake. This affects undici versions from 7.0.0 up to 7.29.1 and from 8.0.0 up to 8.10.2. Users should upgrade to undici 7.29.1 or 8.10.2. |
| gRPC-Go is the Go language implementation of gRPC. Prior to 1.82.2 and 1.83.2, servers created with xds.NewGRPCServer() allow internal/transport/http2_server.go to accept an RPC containing neither the :authority header nor the Host header, while RouteAndProcess in internal/xds/server/routing.go assumes that an authority value exists and indexes the empty slice. A remote client that can complete transport connection establishment can trigger an index-out-of-bounds panic that is not recovered by the per-RPC goroutine and terminates the entire server process. In insecure or ordinary TLS deployments the request can be unauthenticated, while strict mTLS or ALTS deployments require valid transport credentials before the malformed RPC can reach the interceptor. This issue is fixed in versions 1.82.2 and 1.83.2. |
| SQLAdmin is a flexible Admin interface for SQLAlchemy models. Prior to 0.27.1, ModelView.sort_query in sqladmin/models.py accepts the attacker-controlled sortBy list-view query parameter without enforcing the configured column_sortable_list server-side allow-list in self._sort_fields. The value is resolved with getattr and passed to relationship joins and order_by, allowing requests to sort by columns hidden from column_list and by related-model columns through dotted paths. The resulting row order forms an information-exposure oracle for unexposed values, and reversing ascending and descending order confirms their relative ordering. Pairing sortBy with searchable or filterable columns and pagination can narrow the oracle toward specific values, but exact recovery depends on the application's available fields and data. This issue is fixed in version 0.27.1. |
| ExifReader is a JavaScript Exif information parser. Prior to 4.40.1, ExifReader.load() and the asynchronous file and URL loaders can pass attacker-supplied HEIC or AVIF data to the ISO-BMFF parser in src/image-header-iso-bmff.js, where findMetaBox() and parseBox() accept an eight-byte box header without confirming that fields required by the parsed box remain in the DataView. A valid ftyp box followed by an empty free or unknown box can cause an unchecked full-box version read, while a truncated extended-size box can make getBoxLength() and hasEmptyHighBits() read absent size fields. The resulting RangeError escapes the main parsing path and can abort an application request or worker when parse errors are not defensively caught, causing denial of service. This issue is fixed in version 4.40.1. |
| An unrecovered panic in the event stream header decoder in Amazon AWS SDK for Go v2 before release-2026-03-23 might allow an unauthenticated remote actor to terminate the consuming application process via a crafted event stream response frame containing a header value type outside the valid range.
To remediate this issue, users should upgrade to release-2026-03-23 or later, and patch any forked or derivative code. |
| hbs is an Express view engine wrapper for Handlebars. Version 4.3.0 can crash the Node.js process during output escaping when an async helper, registered with registerAsyncHelper, resolves to an object whose toHTML property is truthy but not callable. Handlebars escapeExpression calls the toHTML method on any value that has a truthy toHTML, so such a value throws a TypeError, and because the async substitution runs on a later tick outside the render function's try/catch, the throw is an uncaught exception that terminates the process without sending a response. Only version 4.3.0 is affected, since the throwing escape was introduced by the fix for CVE-2026-16231 and earlier versions do not escape async helper values. It can be triggered remotely when an async helper resolves to an externally influenced object such as parsed JSON. The issue is fixed in hbs 4.3.1, and users should upgrade to hbs 4.3.1 or later. |
| PocketMine-MP before 4.7.2 fails to properly handle exceptions from the adhocore/json-comment library when parsing skin geometry data. Attackers can send login or skin packets with invalid geometry JSON to trigger an unhandled RuntimeException, causing server crash. |
| PocketMine-MP before 4.0.7 contains an unhandled exception vulnerability in the ModalFormResponsePacket handler when processing malformed JSON from clients. Attackers can send specially crafted form response packets with invalid JSON to trigger an uncaught InvalidArgumentException, causing server crashes. |
| Uncaught Exception (CWE-248) in Kibana Cases can lead to denial of service via Input Data Manipulation (CAPEC-153). Malformed link syntax stored in a case comment was not rejected or sanitized when the comment was later formatted for display, and the resulting unhandled error prevented the affected case from being displayed. An authenticated user holding privileges to comment on a case could store such a comment, after which that case became inaccessible to every user who opened it until the stored comment was removed. |
| multer is a middleware for handling multipart/form-data in Node.js. A small multipart request containing two specially crafted text field names can cause an uncaught RangeError (Invalid array length) that terminates the Node.js process. The first field uses a very large numeric array index to allocate a maximum-length sparse array, and a second field then pushes past that length, which throws inside the append-field dependency and is not caught by multer. All versions before 2.3.0 are affected, and the issue is a remotely triggerable denial of service. The issue is fixed in multer 2.3.0. Upgrade to multer 2.3.0 to remediate. |
| Uncaught Exception (CWE-248) in Kibana can lead to a denial of service via Input Data Manipulation (CAPEC-153). An authenticated user holding only the low-privileged feature access required to use the Observability AI Assistant can submit a specially crafted request that produces an unhandled error condition, terminating the Kibana process and denying service to all users and spaces on that instance until it is restarted. |
| Uncaught Exception (CWE-248), resulting from Improper Input Validation (CWE-20), in Kibana can lead to denial of service via Input Data Manipulation (CAPEC-153). An authenticated user holding only low-privileged access can cause an internal error condition in Kibana by supplying specially crafted data. The resulting error is raised on an execution path so it propagates as an uncaught exception and terminates the Kibana process. Kibana is unavailable to all users until the service is restarted, and the condition can be triggered repeatedly. |
| An unauthenticated party able to reach the port of a MongoDB Connector for BI (mongosqld) instance may generate enough routine connection log activity to exhaust the storage backing the configured log path. When a log write or log rotation operation subsequently fails, the resulting error is not handled and the shared mongosqld process ends, ending service for all connected SQL clients. The process continues to end on startup until an operator restores available storage, and the diagnostic message explaining the condition is not recorded. |
| SSH protocol dissector crash in 4.6.0 to 4.6.7 and 4.4.0 to 4.4.18 allows denial of service |
| ### Summary
`qs.stringify` throws a `TypeError` when it serializes an object whose own `constructor` property has a truthy, non-callable `isBuffer` member. `utils.isBuffer` duck-types buffers by calling `obj.constructor.isBuffer(obj)` after checking only that the property is truthy, so a value such as `{ constructor: { isBuffer: "x" } }` makes the call throw `TypeError: obj.constructor.isBuffer is not a function`.
### Details
`lib/stringify.js:127` calls `utils.isBuffer` on every non-primitive value it serializes. `utils.isBuffer` (`lib/utils.js:332`) reads `obj.constructor.isBuffer` and invokes it without verifying that it is a function. `constructor` and `isBuffer` are ordinary property names, so any object carrying them as own properties reaches the unchecked call.
Such an object can be built from untrusted input. `qs.parse("x[constructor][isBuffer]=y", { plainObjects: true })` or `{ allowPrototypes: true }` keeps the `constructor` key as an own property (the default parse options drop it), and `JSON.parse("{\"a\":{\"constructor\":{\"isBuffer\":\"x\"}}}")` produces the same shape with no qs option involved. Express 4 with its default `query parser` setting and body-parser with `extended: true` both call `qs.parse` with `allowPrototypes: true`, so on those stacks `req.query` and `req.body` can carry the shape directly.
#### PoC
```js
var qs = require("qs");
qs.stringify(qs.parse("x[constructor][isBuffer]=y", { plainObjects: true }));
qs.stringify(JSON.parse("{\"a\":{\"constructor\":{\"isBuffer\":\"x\"}}}"));
// TypeError: obj.constructor.isBuffer is not a function
// at Object.isBuffer (lib/utils.js:332:78)
// at stringify (lib/stringify.js:127:45)
```
#### Fix
`lib/utils.js`, applied in e83d321 on `main` and released as v6.16.0:
```diff
- return !!(obj.constructor && obj.constructor.isBuffer && obj.constructor.isBuffer(obj));
+ return !!(obj.constructor && typeof obj.constructor.isBuffer === "function" && obj.constructor.isBuffer(obj));
```
Real `Buffer`, `safer-buffer`, and browserify `buffer` polyfill instances serialize exactly as before; only the throw is removed.
### Affected versions
`>=2.2.5 <6.16.0`, fixed in v6.16.0.
The unguarded duck-type was introduced in 3768a75 and first shipped in v2.2.5 (September 2014). v2.2.4 and earlier used `Buffer.isBuffer` and are not affected. Every release from v2.2.5 through v6.15.3 contains the unguarded call.
### Impact
An unauthenticated request can make any code path that re-serializes attacker-influenced data with `qs.stringify` (for example, rebuilding a query string from `req.query` for a redirect or an upstream request, or serializing a parsed JSON body) throw synchronously. In a typical Node.js HTTP framework the throw is caught by the framework error boundary and the affected request returns a 500; the process survives and other requests are unaffected. Where the call runs outside an error boundary, such as an `async` Express 4 handler (where the throw becomes an unhandled promise rejection) or a background job, the process exits, so the impact in that case depends on the application error handling rather than on qs. |
| Uncaught exception for some Intel(R) TDX modules within Ring 0: Trust Domain may allow a denial of service. System software adversary with a privileged user combined with a high complexity attack may enable denial of service. This result may potentially occur via local access when attack requirements are present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (high) impacts. |
| ALOS HTTP is a Linux-first Go web framework and application server built around a custom networking stack. Prior to 0.0.0-20260617230736-314b6783e196, core/utils.go::sanitizeRequestPath calls splitPathQuery on a request path beginning with a question mark and then performs the unchecked p[0] access without checking whether the resulting path is empty. An unauthenticated client can send a malformed request such as a question-mark-only path through h1_plain.go::ParseH1RequestHead, hpack.go::decodeSimpleGetPathHTTPSRequest, hpack.go::observeHeader, or h3_conn.go::handleRequestStream, causing an out-of-bounds panic before core.Recovery() middleware runs and terminating the server process. This issue is fixed in pseudo-version 0.0.0-20260617230736-314b6783e196. |
