| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: reject root items with drop_progress and zero drop_level
[BUG]
When recovering relocation at mount time, merge_reloc_root() and
btrfs_drop_snapshot() both use BUG_ON(level == 0) to guard against
an impossible state: a non-zero drop_progress combined with a zero
drop_level in a root_item, which can be triggered:
------------[ cut here ]------------
kernel BUG at fs/btrfs/relocation.c:1545!
Oops: invalid opcode: 0000 [#1] SMP KASAN NOPTI
CPU: 1 UID: 0 PID: 283 ... Tainted: 6.18.0+ #16 PREEMPT(voluntary)
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU Ubuntu 24.04 PC v2, BIOS 1.16.3-debian-1.16.3-2
RIP: 0010:merge_reloc_root+0x1266/0x1650 fs/btrfs/relocation.c:1545
Code: ffff0000 00004589 d7e9acfa ffffe8a1 79bafebe 02000000
Call Trace:
merge_reloc_roots+0x295/0x890 fs/btrfs/relocation.c:1861
btrfs_recover_relocation+0xd6e/0x11d0 fs/btrfs/relocation.c:4195
btrfs_start_pre_rw_mount+0xa4d/0x1810 fs/btrfs/disk-io.c:3130
open_ctree+0x5824/0x5fe0 fs/btrfs/disk-io.c:3640
btrfs_fill_super fs/btrfs/super.c:987 [inline]
btrfs_get_tree_super fs/btrfs/super.c:1951 [inline]
btrfs_get_tree_subvol fs/btrfs/super.c:2094 [inline]
btrfs_get_tree+0x111c/0x2190 fs/btrfs/super.c:2128
vfs_get_tree+0x9a/0x370 fs/super.c:1758
fc_mount fs/namespace.c:1199 [inline]
do_new_mount_fc fs/namespace.c:3642 [inline]
do_new_mount fs/namespace.c:3718 [inline]
path_mount+0x5b8/0x1ea0 fs/namespace.c:4028
do_mount fs/namespace.c:4041 [inline]
__do_sys_mount fs/namespace.c:4229 [inline]
__se_sys_mount fs/namespace.c:4206 [inline]
__x64_sys_mount+0x282/0x320 fs/namespace.c:4206
...
RIP: 0033:0x7f969c9a8fde
Code: 0f1f4000 48c7c2b0 fffffff7 d8648902 b8ffffff ffc3660f
---[ end trace 0000000000000000 ]---
The bug is reproducible on 7.0.0-rc2-next-20260310 with our dynamic
metadata fuzzing tool that corrupts btrfs metadata at runtime.
[CAUSE]
A non-zero drop_progress.objectid means an interrupted
btrfs_drop_snapshot() left a resume point on disk, and in that case
drop_level must be greater than 0 because the checkpoint is only
saved at internal node levels.
Although this invariant is enforced when the kernel writes the root
item, it is not validated when the root item is read back from disk.
That allows on-disk corruption to provide an invalid state with
drop_progress.objectid != 0 and drop_level == 0.
When relocation recovery later processes such a root item,
merge_reloc_root() reads drop_level and hits BUG_ON(level == 0). The
same invalid metadata can also trigger the corresponding BUG_ON() in
btrfs_drop_snapshot().
[FIX]
Fix this by validating the root_item invariant in tree-checker when
reading root items from disk: if drop_progress.objectid is non-zero,
drop_level must also be non-zero. Reject such malformed metadata with
-EUCLEAN before it reaches merge_reloc_root() or btrfs_drop_snapshot()
and triggers the BUG_ON.
After the fix, the same corruption is correctly rejected by tree-checker
and the BUG_ON is no longer triggered. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: reject mount if bigalloc with s_first_data_block != 0
bigalloc with s_first_data_block != 0 is not supported, reject mounting
it. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix accepting multiple L2CAP_ECRED_CONN_REQ
Currently the code attempts to accept requests regardless of the
command identifier which may cause multiple requests to be marked
as pending (FLAG_DEFER_SETUP) which can cause more than
L2CAP_ECRED_MAX_CID(5) to be allocated in l2cap_ecred_rsp_defer
causing an overflow.
The spec is quite clear that the same identifier shall not be used on
subsequent requests:
'Within each signaling channel a different Identifier shall be used
for each successive request or indication.'
https://www.bluetooth.com/wp-content/uploads/Files/Specification/HTML/Core-62/out/en/host/logical-link-control-and-adaptation-protocol-specification.html#UUID-32a25a06-4aa4-c6c7-77c5-dcfe3682355d
So this attempts to check if there are any channels pending with the
same identifier and rejects if any are found. |
| A denial of service vulnerability was found in the 389-ds-base LDAP server. This issue may allow an authenticated user to cause a server denial of service while attempting to log in with a user with a malformed hash in their password. |
| Some payload elements of the messages sent between two stations in a networking architecture are not properly checked on the receiving station allowing an attacker to execute unauthorized commands in the application. |
| A local attacker could cause a full device reset by resetting the device passwords using an invalid reset file via USB. |
| Avahi is a system which facilitates service discovery on a local network via the mDNS/DNS-SD protocol suite. Prior to version 0.9-rc4, any unprivileged local user can crash avahi-daemon by sending a single D-Bus method call with conflicting publish flags. This issue has been patched in version 0.9-rc4. |
| This CVE ID has been rejected or withdrawn by its CVE Numbering Authority. |
| An Improper Validation of Consistency within Input vulnerability in the routing protocol daemon (rpd) of Juniper Networks Junos OS and Junos OS Evolved allows an unauthenticated network-based attacker sending a specifically malformed BGP packet to cause rpd to crash and restart, resulting in a Denial of Service (DoS). Continued receipt and processing of this packet will create a sustained Denial of Service (DoS) condition.
In some cases, rpd fails to restart requiring a manual restart via the 'restart routing' CLI command.
This issue only affects systems with BGP traceoptions enabled and
requires a BGP session to be already established. Systems without BGP traceoptions enabled are not affected by this issue.
This issue affects iBGP and eBGP, and both IPv4 and IPv6 are affected by this vulnerability.
This issue affects:
Junos OS:
* All versions before 21.4R3-S8,
* 22.2 before 22.2R3-S5,
* 22.3 before 22.3R3-S4,
* 22.4 before 22.4R3-S3,
* 23.2 before 23.2R2-S2,
* 23.4 before 23.4R2;
Junos OS Evolved:
* All versions before 21.4R3-S8-EVO,
* 22.2-EVO before 22.2R3-S5-EVO,
* 22.3-EVO before 22.3R3-S4-EVO,
* 22.4-EVO before 22.4R3-S3-EVO,
* 23.2-EVO before 23.2R2-S2-EVO,
* 23.4-EVO before 23.4R2-EVO. |
| Improper Validation of Consistency within Input vulnerability in Drupal Reverse Proxy Header allows Manipulating User-Controlled Variables.This issue affects Reverse Proxy Header: from 0.0.0 before 1.1.2. |
| Missing validation of the root metatdata version number could allow an actor to supply an arbitrary version number to the client instead of the intended version in the root metadata file, altering the version fetched by the client. Users should upgrade to tough version 0.20.0 or later and ensure any forked or derivative code is patched to incorporate the new fixes. |
| Improper Input Validation in the Networking Stack of QNX SDP version(s) 6.6, 7.0, and 7.1 could allow an attacker to potentially cause Information Disclosure or a Denial-of-Service condition. |
| An issue has been discovered in GitLab CE/EE affecting all versions from 11.1 before 17.10.7, 17.11 before 17.11.3, and 18.0 before 18.0.1. Improper XPath validation allows modified SAML response to bypass 2FA requirement under specialized conditions. |
| vLLM is an inference and serving engine for large language models (LLMs). In versions starting from 0.7.0 to before 0.9.0, in the file vllm/multimodal/hasher.py, the MultiModalHasher class has a security and data integrity issue in its image hashing method. Currently, it serializes PIL.Image.Image objects using only obj.tobytes(), which returns only the raw pixel data, without including metadata such as the image’s shape (width, height, mode). As a result, two images of different sizes (e.g., 30x100 and 100x30) with the same pixel byte sequence could generate the same hash value. This may lead to hash collisions, incorrect cache hits, and even data leakage or security risks. This issue has been patched in version 0.9.0. |
| xmldom is a pure JavaScript W3C standard-based (XML DOM Level 2 Core) `DOMParser` and `XMLSerializer` module. xmldom parses XML that is not well-formed because it contains multiple top level elements, and adds all root nodes to the `childNodes` collection of the `Document`, without reporting any error or throwing. This breaks the assumption that there is only a single root node in the tree, which led to issuance of CVE-2022-39299 as it is a potential issue for dependents. Update to @xmldom/xmldom@~0.7.7, @xmldom/xmldom@~0.8.4 (dist-tag latest) or @xmldom/xmldom@>=0.9.0-beta.4 (dist-tag next). As a workaround, please one of the following approaches depending on your use case: instead of searching for elements in the whole DOM, only search in the `documentElement`or reject a document with a document that has more then 1 `childNode`. |
| An issue was discovered in Samsung Mobile Processor Exynos 980, Exynos 850, Exynos 1280, Exynos 1380, and Exynos 1330. In the function slsi_nan_followup_get_nl_params(), there is no input validation check on hal_req->sdea_service_specific_info_len coming from userspace, which can lead to a heap overwrite. |
| An issue was discovered in Samsung Mobile Processor Exynos 980, Exynos 850, Exynos 1280, Exynos 1380, and Exynos 1330. In the function slsi_nan_followup_get_nl_params(), there is no input validation check on hal_req->service_specific_info_len coming from userspace, which can lead to a heap overwrite. |
| A command injection vulnerability exists in local RACADM. A malicious authenticated user could gain control of the underlying operating system. |
| In JetBrains TeamCity before 2024.03 server administrators could remove arbitrary files from the server by installing tools |
| In JetBrains TeamCity before 2024.03 2FA could be bypassed by providing a special URL parameter |
