| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
block: fix resource leak in blk_register_queue() error path
When registering a queue fails after blk_mq_sysfs_register() is
successful but the function later encounters an error, we need
to clean up the blk_mq_sysfs resources.
Add the missing blk_mq_sysfs_unregister() call in the error path
to properly clean up these resources and prevent a memory leak. |
| In the Linux kernel, the following vulnerability has been resolved:
net: phy: allow MDIO bus PM ops to start/stop state machine for phylink-controlled PHY
DSA has 2 kinds of drivers:
1. Those who call dsa_switch_suspend() and dsa_switch_resume() from
their device PM ops: qca8k-8xxx, bcm_sf2, microchip ksz
2. Those who don't: all others. The above methods should be optional.
For type 1, dsa_switch_suspend() calls dsa_user_suspend() -> phylink_stop(),
and dsa_switch_resume() calls dsa_user_resume() -> phylink_start().
These seem good candidates for setting mac_managed_pm = true because
that is essentially its definition [1], but that does not seem to be the
biggest problem for now, and is not what this change focuses on.
Talking strictly about the 2nd category of DSA drivers here (which
do not have MAC managed PM, meaning that for their attached PHYs,
mdio_bus_phy_suspend() and mdio_bus_phy_resume() should run in full),
I have noticed that the following warning from mdio_bus_phy_resume() is
triggered:
WARN_ON(phydev->state != PHY_HALTED && phydev->state != PHY_READY &&
phydev->state != PHY_UP);
because the PHY state machine is running.
It's running as a result of a previous dsa_user_open() -> ... ->
phylink_start() -> phy_start() having been initiated by the user.
The previous mdio_bus_phy_suspend() was supposed to have called
phy_stop_machine(), but it didn't. So this is why the PHY is in state
PHY_NOLINK by the time mdio_bus_phy_resume() runs.
mdio_bus_phy_suspend() did not call phy_stop_machine() because for
phylink, the phydev->adjust_link function pointer is NULL. This seems a
technicality introduced by commit fddd91016d16 ("phylib: fix PAL state
machine restart on resume"). That commit was written before phylink
existed, and was intended to avoid crashing with consumer drivers which
don't use the PHY state machine - phylink always does, when using a PHY.
But phylink itself has historically not been developed with
suspend/resume in mind, and apparently not tested too much in that
scenario, allowing this bug to exist unnoticed for so long. Plus, prior
to the WARN_ON(), it would have likely been invisible.
This issue is not in fact restricted to type 2 DSA drivers (according to
the above ad-hoc classification), but can be extrapolated to any MAC
driver with phylink and MDIO-bus-managed PHY PM ops. DSA is just where
the issue was reported. Assuming mac_managed_pm is set correctly, a
quick search indicates the following other drivers might be affected:
$ grep -Zlr PHYLINK_NETDEV drivers/ | xargs -0 grep -L mac_managed_pm
drivers/net/ethernet/atheros/ag71xx.c
drivers/net/ethernet/microchip/sparx5/sparx5_main.c
drivers/net/ethernet/microchip/lan966x/lan966x_main.c
drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c
drivers/net/ethernet/freescale/fs_enet/fs_enet-main.c
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
drivers/net/ethernet/freescale/ucc_geth.c
drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
drivers/net/ethernet/marvell/mvneta.c
drivers/net/ethernet/marvell/prestera/prestera_main.c
drivers/net/ethernet/mediatek/mtk_eth_soc.c
drivers/net/ethernet/altera/altera_tse_main.c
drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c
drivers/net/ethernet/meta/fbnic/fbnic_phylink.c
drivers/net/ethernet/tehuti/tn40_phy.c
drivers/net/ethernet/mscc/ocelot_net.c
Make the existing conditions dependent on the PHY device having a
phydev->phy_link_change() implementation equal to the default
phy_link_change() provided by phylib. Otherwise, we implicitly know that
the phydev has the phylink-provided phylink_phy_change() callback, and
when phylink is used, the PHY state machine always needs to be stopped/
started on the suspend/resume path. The code is structured as such that
if phydev->phy_link_change() is absent, it is a matter of time until the
kernel will crash - no need to further complicate the test.
Thus, for the situation where the PM is not managed b
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: handle overlapped pclusters out of crafted images properly
syzbot reported a task hang issue due to a deadlock case where it is
waiting for the folio lock of a cached folio that will be used for
cache I/Os.
After looking into the crafted fuzzed image, I found it's formed with
several overlapped big pclusters as below:
Ext: logical offset | length : physical offset | length
0: 0.. 16384 | 16384 : 151552.. 167936 | 16384
1: 16384.. 32768 | 16384 : 155648.. 172032 | 16384
2: 32768.. 49152 | 16384 : 537223168.. 537239552 | 16384
...
Here, extent 0/1 are physically overlapped although it's entirely
_impossible_ for normal filesystem images generated by mkfs.
First, managed folios containing compressed data will be marked as
up-to-date and then unlocked immediately (unlike in-place folios) when
compressed I/Os are complete. If physical blocks are not submitted in
the incremental order, there should be separate BIOs to avoid dependency
issues. However, the current code mis-arranges z_erofs_fill_bio_vec()
and BIO submission which causes unexpected BIO waits.
Second, managed folios will be connected to their own pclusters for
efficient inter-queries. However, this is somewhat hard to implement
easily if overlapped big pclusters exist. Again, these only appear in
fuzzed images so let's simply fall back to temporary short-lived pages
for correctness.
Additionally, it justifies that referenced managed folios cannot be
truncated for now and reverts part of commit 2080ca1ed3e4 ("erofs: tidy
up `struct z_erofs_bvec`") for simplicity although it shouldn't be any
difference. |
| In the Linux kernel, the following vulnerability has been resolved:
fork: defer linking file vma until vma is fully initialized
Thorvald reported a WARNING [1]. And the root cause is below race:
CPU 1 CPU 2
fork hugetlbfs_fallocate
dup_mmap hugetlbfs_punch_hole
i_mmap_lock_write(mapping);
vma_interval_tree_insert_after -- Child vma is visible through i_mmap tree.
i_mmap_unlock_write(mapping);
hugetlb_dup_vma_private -- Clear vma_lock outside i_mmap_rwsem!
i_mmap_lock_write(mapping);
hugetlb_vmdelete_list
vma_interval_tree_foreach
hugetlb_vma_trylock_write -- Vma_lock is cleared.
tmp->vm_ops->open -- Alloc new vma_lock outside i_mmap_rwsem!
hugetlb_vma_unlock_write -- Vma_lock is assigned!!!
i_mmap_unlock_write(mapping);
hugetlb_dup_vma_private() and hugetlb_vm_op_open() are called outside
i_mmap_rwsem lock while vma lock can be used in the same time. Fix this
by deferring linking file vma until vma is fully initialized. Those vmas
should be initialized first before they can be used. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/kbuf: fix signedness in this_len calculation
When importing and using buffers, buf->len is considered unsigned.
However, buf->len is converted to signed int when committing. This can
lead to unexpected behavior if the buffer is large enough to be
interpreted as a negative value. Make min_t calculation unsigned. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: use volume UUID in FS_OBJECT_ID_INFORMATION
Use sb->s_uuid for a proper volume identifier as the primary choice.
For filesystems that do not provide a UUID, fall back to stfs.f_fsid
obtained from vfs_statfs(). |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: unset conn->binding on failed binding request
When a multichannel SMB2_SESSION_SETUP request with
SMB2_SESSION_REQ_FLAG_BINDING fails ksmbd sets conn->binding = true
but never clears it on the error path. This leaves the connection in
a binding state where all subsequent ksmbd_session_lookup_all() calls
fall back to the global sessions table. This fix it by clearing
conn->binding = false in the error path. |
| The wpForo Forum plugin for WordPress is vulnerable to Arbitrary File Deletion in versions up to and including 3.0.2. This is due to a two-step logic flaw: the topic_add() and topic_edit() action handlers accept arbitrary user-supplied data[*] arrays from $_REQUEST and store them as postmeta without restricting which fields may contain array values. Because 'body' is included in the allowed topic fields list, an attacker can supply data[body][fileurl] with an arbitrary file path (e.g., wp-config.php or an absolute server path). This poisoned fileurl is persisted to the plugin's custom postmeta database table. Subsequently, when the attacker submits wpftcf_delete[]=body on a topic_edit request, the add_file() method retrieves the stored postmeta record, extracts the attacker-controlled fileurl, passes it through wpforo_fix_upload_dir() which only rewrites legitimate wpforo upload paths and returns all other paths unchanged, and then calls wp_delete_file() on the unvalidated path. This makes it possible for authenticated attackers, with subscriber-level access and above, to delete arbitrary files writable by the PHP process on the server, including critical files such as wp-config. |
| CR/LF bytes were not rejected by HTTP client proxy tunnel headers or host. |
| Side-channel information leakage in Navigation in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: Medium) |
| Policy bypass in Blink in Google Chrome prior to 147.0.7727.55 allowed a remote attacker to perform UI spoofing via a crafted HTML page. (Chromium security severity: Medium) |
| Use after free in PrivateAI in Google Chrome prior to 147.0.7727.55 allowed a remote attacker who convinced a user to engage in specific UI gestures to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) |
| xdg-dbus-proxy is a filtering proxy for D-Bus connections. Prior to 0.1.7, a policy parser vulnerability allows bypassing eavesdrop restrictions. The proxy checks for eavesdrop=true in policy rules but fails to handle eavesdrop ='true' (with a space before the equals sign) and similar cases. Clients can intercept D-Bus messages they should not have access to. This vulnerability is fixed in 0.1.7. |
| Unfurl before 2026.04 contains an unbounded zlib decompression vulnerability in parse_compressed.py that allows remote attackers to cause denial of service. Attackers can submit highly compressed payloads via URL parameters to the /json/visjs endpoint that expand to gigabytes, exhausting server memory and crashing the service. |
| Hayabusa versions prior to 3.8.0 contain a cross-site scripting (XSS) vulnerability in its HTML report output that allows an attacker to execute arbitrary JavaScript when a user scans JSON-exported logs containing malicious content in the Computer field. An attacker can inject JavaScript into the Computer field of JSON logs that executes in the forensic examiner's browser session when viewing the generated HTML report, leading to information disclosure or code execution. |
| The Optimole – Optimize Images in Real Time plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via URL paths in versions up to, and including, 4.2.3 This is due to insufficient output escaping on user-supplied URL paths in the get_current_url() function, which are inserted into JavaScript code via str_replace() without proper JavaScript context escaping in the replace_content() function. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| The Optimole – Optimize Images | Convert WebP & AVIF | CDN & Lazy Load | Image Optimization plugin for WordPress is vulnerable to Stored Cross-Site Scripting in all versions up to, and including, 4.2.2. This is due to insufficient input sanitization and output escaping on the user-supplied 's' parameter (srcset descriptor) in the unauthenticated /wp-json/optimole/v1/optimizations REST endpoint. The endpoint validates requests using an HMAC signature and timestamp, but these values are exposed directly in the frontend HTML making them accessible to any visitor. The plugin uses sanitize_text_field() on the descriptor value of rest.php, which strips HTML tags but does not escape double quotes. The poisoned descriptor is then stored via transients (backed by the WordPress options table) and later retrieved and injected verbatim into the srcset attribute of tag_replacer.php without proper escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts into pages that will execute whenever a user accesses the injected page. |
| The LifterLMS plugin for WordPress is vulnerable to SQL Injection via the 'order' parameter in all versions up to, and including, 9.2.1. This is due to insufficient escaping on the user supplied parameter and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Instructor-level access and above who have the edit_post capability on the quiz, to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| The BuddyPress Groupblog plugin for WordPress is vulnerable to Privilege Escalation in all versions up to, and including, 1.9.3. This is due to the group blog settings handler accepting the `groupblog-blogid`, `default-member`, and `groupblog-silent-add` parameters from user input without proper authorization checks. The `groupblog-blogid` parameter allows any group admin (including Subscribers who create their own group) to associate their group with any blog on the Multisite network, including the main site (blog ID 1). The `default-member` parameter accepts any WordPress role, including `administrator`, without validation against a whitelist. When combined with `groupblog-silent-add`, any user who joins the attacker's group is automatically added to the targeted blog with the injected role. This makes it possible for authenticated attackers, with Subscriber-level access and above, to escalate any user (including themselves via a second account) to Administrator on the main site of the Multisite network. |
| The UsersWP – Front-end login form, User Registration, User Profile & Members Directory plugin for WP plugin for WordPress is vulnerable to blind Server-Side Request Forgery in all versions up to, and including, 1.2.58. This is due to insufficient URL origin validation in the process_image_crop() method when processing avatar/banner image crop operations. The function accepts a user-controlled URL via the uwp_crop POST parameter and only validates it using esc_url() for sanitization and wp_check_filetype() for extension verification, without enforcing that the URL references a local uploads file. The URL is then passed to uwp_resizeThumbnailImage() which uses it in PHP image processing functions (getimagesize(), imagecreatefrom*()) that support URL wrappers and perform outbound HTTP requests. This makes it possible for authenticated attackers with subscriber-level access and above to coerce the WordPress server into making arbitrary HTTP requests to attacker-controlled or internal network destinations, enabling internal network scanning and potential access to sensitive services. |
