| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, additional exploits in the expression evaluation of n8n have been identified and patched following CVE-2025-68613. An authenticated user with permission to create or modify workflows could abuse crafted expressions in workflow parameters to trigger unintended system command execution on the host running n8n. The issues have been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate all known vulnerabilities. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or deploy n8n in a hardened environment with restricted operating system privileges and network access to reduce the impact of potential exploitation. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.2.0 and 1.123.8, an authenticated user with permission to create or modify workflows could chain the Read/Write Files from Disk node with git operations to achieve remote code execution. By writing to specific configuration files and then triggering a git operation, the attacker could execute arbitrary shell commands on the n8n host. The issue has been fixed in n8n versions 2.2.0 and 1.123.8. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Read/Write Files from Disk node by adding `n8n-nodes-base.readWriteFile` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Versions starting with 1.65.0 and below 1.121.0 enable an attacker to access files on the underlying server through execution of certain form-based workflows. A vulnerable workflow could grant access to an unauthenticated remote attacker, resulting in exposure of sensitive information stored on the system and may enable further compromise depending on deployment configuration and workflow usage. This issue is fixed in version 1.121.0. |
| n8n is an open source workflow automation platform. In versions 0.121.2 and below, an authenticated attacker may be able to execute malicious code using the n8n service. This could result in full compromise and can impact both self-hosted and n8n Cloud instances. This issue is fixed in version 1.121.3. Administrators can reduce exposure by disabling the Git node and limiting access for untrusted users, but upgrading to the latest version is recommended. |
| n8n is an open source workflow automation platform. In versions from 0.150.0 to before 2.2.2, an authentication bypass vulnerability in the Stripe Trigger node allows unauthenticated parties to trigger workflows by sending forged Stripe webhook events. The Stripe Trigger creates and stores a Stripe webhook signing secret when registering the webhook endpoint, but incoming webhook requests were not verified against this secret. As a result, any HTTP client that knows the webhook URL could send a POST request containing a matching event type, causing the workflow to execute as if a legitimate Stripe event had been received. This issue affects n8n users who have active workflows using the Stripe Trigger node. An attacker could potentially fake payment or subscription events and influence downstream workflow behavior. The practical risk is reduced by the fact that the webhook URL contains a high-entropy UUID; however, authenticated n8n users with access to the workflow can view this webhook ID. This issue has been patched in version 2.2.2. A temporary workaround for this issue involves users deactivating affected workflows or restricting access to workflows containing Stripe Trigger nodes to trusted users only. |
| Using string formatting and exception handling, an attacker may bypass n8n's python-task-executor sandbox restrictions and run arbitrary unrestricted Python code in the underlying operating system.
The vulnerability can be exploited via the Code block by an authenticated user with basic permissions and can lead to a full n8n instance takeover on instances operating under "Internal" execution mode.
If the instance is operating under the "External" execution mode (ex. n8n's official Docker image) - arbitrary code execution occurs inside a Sidecar container and not the main node, which significantly reduces the vulnerability impact. |
| n8n is an open source workflow automation platform. Prior to version 1.123.2, a Cross-Site Scripting (XSS) vulnerability has been identified in the handling of webhook responses and related HTTP endpoints. Under certain conditions, the Content Security Policy (CSP) sandbox protection intended to isolate HTML responses may not be applied correctly. An authenticated user with permission to create or modify workflows could abuse this to execute malicious scripts with same-origin privileges when other users interact with the crafted workflow. This could lead to session hijacking and account takeover. This issue has been patched in version 1.123.2. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.18 and 2.5.0, a vulnerability in the file access controls allows authenticated users with permission to create or modify workflows to read sensitive files from the n8n host system. This can be exploited to obtain critical configuration data and user credentials, leading to complete account takeover of any user on the instance. This issue has been patched in versions 1.123.18 and 2.5.0. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.10 and 2.5.0, vulnerabilities in the Git node allowed authenticated users with permission to create or modify workflows to execute arbitrary system commands or read arbitrary files on the n8n host. This issue has been patched in versions 1.123.10 and 2.5.0. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.9 and 2.2.1, a Cross-Site Scripting (XSS) vulnerability existed in a markdown rendering component used in n8n's interface, including workflow sticky notes and other areas that support markdown content. An authenticated user with permission to create or modify workflows could abuse this to execute scripts with same-origin privileges when other users interact with a maliciously crafted workflow. This could lead to session hijacking and account takeover. This issue has been patched in versions 1.123.9 and 2.2.1. |
| n8n is an open source workflow automation platform. Prior to version 2.4.8, a vulnerability in the Python Code node allows authenticated users to break out of the Python sandbox environment and execute code outside the intended security boundary. This issue has been patched in version 2.4.8. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could use the Python Code node to escape the sandbox. The sandbox did not sufficiently restrict access to certain built-in Python objects, allowing an attacker to exfiltrate file contents or achieve RCE. On instances using internal Task Runners (default runner mode), this could result in full compromise of the n8n host. On instances using external Task Runners, the attacker might gain access to or impact other task executed on the Task Runner. Task Runners must be enabled using `N8N_RUNNERS_ENABLED=true`. The issue has been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to this version or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only., and/or disable the Code node by adding `n8n-nodes-base.code` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could leverage the Merge node's SQL query mode to execute arbitrary code and write arbitrary files on the n8n server. The issues have been fixed in n8n versions 2.10.1, 2.9.3, and 1.123.22. Users should upgrade to one of these versions or later to remediate all known vulnerabilities. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Merge node by adding `n8n-nodes-base.merge` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.10.1, 2.9.3, and 1.123.22, an authenticated user with permission to create or modify workflows could inject arbitrary scripts into pages rendered by the n8n application using different techniques on various nodes (Form Trigger node, Chat Trigger node, Send & Wait node, Webhook Node, and Chat Node). Scripts injected by a malicious workflow execute in the browser of any user who visits the affected page, enabling session hijacking and account takeover. The issues have been fixed in n8n versions 2.10.1 and 1.123.21. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations. Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Webhook node by adding `n8n-nodes-base.webhook` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.14.1, 2.13.3, and 1.123.27, an authenticated user with the `global:member` role could exploit chained authorization flaws in n8n's credential pipeline to steal plaintext secrets from generic HTTP credentials (`httpBasicAuth`, `httpHeaderAuth`, `httpQueryAuth`) belonging to other users on the same instance. The attack abuses a name-based credential resolution path that does not enforce ownership or project scope, combined with a bypass in the credentials permission checker that causes generic HTTP credential types to be skipped during pre-execution validation. Together, these flaws allow a member-role user to resolve another user's credential ID and execute a workflow that decrypts and uses that credential without authorization. Native integration credential types (e.g. `slackApi`, `openAiApi`, `postgres`) are not affected by this issue. This vulnerability affects Community Edition only. Enterprise Edition has additional permission gates on workflow creation and execution that independently block this attack chain. The issue has been fixed in n8n versions 1.123.27, 2.13.3, and 2.14.1. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Restrict instance access to fully trusted users only, and/or audit credentials stored on the instance and rotate any generic HTTP credentials (`httpBasicAuth`, `httpHeaderAuth`, `httpQueryAuth`) that may have been exposed. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.14.1, 2.13.3, and 1.123.26, an authenticated user with permission to create or modify workflows could use the Merge node's "Combine by SQL" mode to read local files on the n8n host and achieve remote code execution. The AlaSQL sandbox did not sufficiently restrict certain SQL statements, allowing an attacker to access sensitive files on the server or even compromise the instance. The issue has been fixed in n8n versions 2.14.1, 2.13.3, and 1.123.26. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only, and/or disable the Merge node by adding `n8n-nodes-base.merge` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.4.0 and 1.121.0, when LDAP authentication is enabled, n8n automatically linked an LDAP identity to an existing local account if the LDAP email attribute matched the local account's email. An authenticated LDAP user who could control their own LDAP email attribute could set it to match another user's email — including an administrator's — and upon login gain full access to that account. The account linkage persisted even if the LDAP email was later reverted, resulting in a permanent account takeover. LDAP authentication must be configured and active (non-default). The issue has been fixed in n8n versions 2.4.0 and 1.121.0. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Disable LDAP authentication until the instance can be upgraded, restrict LDAP directory permissions so that users cannot modify their own email attributes, and/or audit existing LDAP-linked accounts for unexpected account associations. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 1.123.22, 2.9.3, and 2.10.1, an authenticated user with permission to create or modify workflows could use the JavaScript Task Runner to allocate uninitialized memory buffers. Uninitialized buffers may contain residual data from the same Node.js process — including data from prior requests, tasks, secrets, or tokens — resulting in information disclosure of sensitive in-process data. Task Runners must be enabled using `N8N_RUNNERS_ENABLED=true`. In external runner mode, the impact is limited to data within the external runner process. The issue has been fixed in n8n versions 1.123.22, 2.10.1 , and 2.9.3. Users should upgrade to this version or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only, and/or use external runner mode (`N8N_RUNNERS_MODE=external`) to isolate the runner process. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.14.1, 2.13.3, and 1.123.27, an authenticated user with permission to create or modify workflows could exploit a prototype pollution vulnerability in the XML and the GSuiteAdmin nodes. By supplying a crafted parameters as part of node configuration, an attacker could write attacker-controlled values onto `Object.prototype`. An attacker could use this prototype pollution to achieve remote code execution on the n8n instance. The issue has been fixed in n8n versions 2.14.1, 2.13.3, and 1.123.27. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only, and/or disable the XML node by adding `n8n-nodes-base.xml` to the `NODES_EXCLUDE` environment variable. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
| n8n is an open source workflow automation platform. Prior to versions 2.14.1, 2.13.3, and 1.123.26, an authenticated user with permission to create or modify workflows could exploit a SQL injection vulnerability in the Data Table Get node. On default SQLite DB, single statements can be manipulated and the attack surface is practically limited. On PostgreSQL deployments, multi-statement execution is possible, enabling data modification and deletion. The issue has been fixed in n8n versions 1.123.26, 2.13.3, and 2.14.1. Users should upgrade to one of these versions or later to remediate the vulnerability. If upgrading is not immediately possible, administrators should consider the following temporary mitigations: Limit workflow creation and editing permissions to fully trusted users only, disable the Data Table node by adding `n8n-nodes-base.dataTable` to the `NODES_EXCLUDE` environment variable, and/or review existing workflows for Data Table Get nodes where `orderByColumn` is set to an expression that incorporates external or user-supplied input. These workarounds do not fully remediate the risk and should only be used as short-term mitigation measures. |
