| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability, which was classified as critical, has been found in LB-LINK BL-AC1900, BL-AC2100_AZ3, BL-AC3600, BL-AX1800, BL-AX5400P and BL-WR9000 up to 20250702. This issue affects the function bs_GetManPwd in the library libblinkapi.so of the file /cgi-bin/lighttpd.cgi. The manipulation leads to information disclosure. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Bare Metal Operator (BMO) implements a Kubernetes API for managing bare metal hosts in Metal3. The `BareMetalHost` (BMH) CRD allows the `userData`, `metaData`, and `networkData` for the provisioned host to be specified as links to Kubernetes Secrets. There are fields for both the `Name` and `Namespace` of the Secret, meaning that versions of the baremetal-operator prior to 0.8.0, 0.6.2, and 0.5.2 will read a `Secret` from any namespace. A user with access to create or edit a `BareMetalHost` can thus exfiltrate a `Secret` from another namespace by using it as e.g. the `userData` for provisioning some host (note that this need not be a real host, it could be a VM somewhere).
BMO will only read a key with the name `value` (or `userData`, `metaData`, or `networkData`), so that limits the exposure somewhat. `value` is probably a pretty common key though. Secrets used by _other_ `BareMetalHost`s in different namespaces are always vulnerable. It is probably relatively unusual for anyone other than cluster administrators to have RBAC access to create/edit a `BareMetalHost`. This vulnerability is only meaningful, if the cluster has users other than administrators and users' privileges are limited to their respective namespaces.
The patch prevents BMO from accepting links to Secrets from other namespaces as BMH input. Any BMH configuration is only read from the same namespace only. The problem is patched in BMO releases v0.7.0, v0.6.2 and v0.5.2 and users should upgrade to those versions. Prior upgrading, duplicate the BMC Secrets to the namespace where the corresponding BMH is. After upgrade, remove the old Secrets. As a workaround, an operator can configure BMO RBAC to be namespace scoped for Secrets, instead of cluster scoped, to prevent BMO from accessing Secrets from other namespaces. |
| Incorrect access control in the realtime.cgi endpoint of Deep Sea Electronics devices DSE855 v1.1.0 to v1.1.26 allows attackers to gain access to the admin panel and complete control of the device. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in MBE Worldwide S.P.A. MBE eShip allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects MBE eShip: from n/a through 2.1.2. |
| The Intelligence plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 1.4.0. This is due the plugin not preventing direct access to the /vendor/levelten/intel/realtime/index.php file and display_errors being enabled. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website. |
| A vulnerability has been identified in which an RKE1 cluster keeps
constantly reconciling when secrets encryption configuration is enabled.
When reconciling, the Kube API secret values are written in plaintext
on the AppliedSpec. Cluster owners, Cluster members, and Project members
(for projects within the cluster), all have RBAC permissions to view
the cluster object from the apiserver. |
| The Glossary plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 2.2.26. This is due the plugin utilizing wpdesk and not preventing direct access to the test files along with display_errors being enabled. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website. |
| ** UNSUPPORTED WHEN ASSIGNED ** A vulnerability has been found in D-Link DNS-320L, DNS-320LW and DNS-327L up to 20240403 and classified as problematic. Affected by this vulnerability is an unknown functionality of the file /cgi-bin/info.cgi of the component HTTP GET Request Handler. The manipulation leads to information disclosure. The attack can be launched remotely. The exploit has been disclosed to the public and may be used. The identifier VDB-259285 was assigned to this vulnerability. NOTE: This vulnerability only affects products that are no longer supported by the maintainer. NOTE: Vendor was contacted early and confirmed immediately that the product is end-of-life. It should be retired and replaced. |
| Git Credential Manager (GCM) is a secure Git credential helper built on .NET that runs on Windows, macOS, and Linux. The Git credential protocol is text-based over standard input/output, and consists of a series of lines of key-value pairs in the format `key=value`. Git's documentation restricts the use of the NUL (`\0`) character and newlines to form part of the keys or values. When Git reads from standard input, it considers both LF and CRLF as newline characters for the credential protocol by virtue of calling `strbuf_getline` that calls to `strbuf_getdelim_strip_crlf`. Git also validates that a newline is not present in the value by checking for the presence of the line-feed character (LF, `\n`), and errors if this is the case. This captures both LF and CRLF-type newlines. Git Credential Manager uses the .NET standard library `StreamReader` class to read the standard input stream line-by-line and parse the `key=value` credential protocol format. The implementation of the `ReadLineAsync` method considers LF, CRLF, and CR as valid line endings. This is means that .NET considers a single CR as a valid newline character, whereas Git does not. This mismatch of newline treatment between Git and GCM means that an attacker can craft a malicious remote URL. When a user clones or otherwise interacts with a malicious repository that requires authentication, the attacker can capture credentials for another Git remote. The attack is also heightened when cloning from repositories with submodules when using the `--recursive` clone option as the user is not able to inspect the submodule remote URLs beforehand. This issue has been patched in version 2.6.1 and all users are advised to upgrade. Users unable to upgrade should only interact with trusted remote repositories, and not clone with `--recursive` to allow inspection of any submodule URLs before cloning those submodules. |
| Information exposure vulnerability in RT software affecting version 4.4.1. This vulnerability allows an attacker with local access to the device to retrieve sensitive information about the application, such as vulnerability tickets, because the application stores the information in the browser cache, leading to information exposure despite session termination. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Wikimedia Foundation Mediawiki - SocialProfile Extension allows Functionality Misuse.This issue affects Mediawiki - SocialProfile Extension: from 1.39.X before 1.39.11, from 1.41.X before 1.41.3, from 1.42.X before 1.42.2. |
| A vulnerability in the router mode configuration of HPE Instant On Access Points exposed certain network configuration details to unintended interfaces. A malicious actor could gain knowledge of internal network configuration details through inspecting impacted packets. |
| Buffalo LS520D 4.53 is vulnerable to Arbitrary file read, which allows unauthenticated attackers to access the NAS web UI and read arbitrary internal files. |
| The Backup, Restore and Migrate WordPress Sites With the XCloner Plugin plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 4.7.3. This is due the plugin utilizing sabre without preventing direct access to the files. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website. |
| The RestroPress – Online Food Ordering System plugin for WordPress is vulnerable to Authentication Bypass in versions 3.0.0 to 3.1.9.2. This is due to the plugin exposing user private tokens and API data via the /wp-json/wp/v2/users REST API endpoint. This makes it possible for unauthenticated attackers to forge JWT tokens for other users, including administrators, and authenticate as them. |
| The OpenTelemetry Collector module AWS firehose receiver is for ingesting AWS Kinesis Data Firehose delivery stream messages and parsing the records received based on the configured record type. `awsfirehosereceiver` allows unauthenticated remote requests, even when configured to require a key. OpenTelemetry Collector can be configured to receive CloudWatch metrics via an AWS Firehose Stream. Firehose sets the header `X-Amz-Firehose-Access-Key` with an arbitrary configured string. The OpenTelemetry Collector awsfirehosereceiver can optionally be configured to require this key on incoming requests. However, when this is configured it **still accepts incoming requests with no key**. Only OpenTelemetry Collector users configured with the “alpha” `awsfirehosereceiver` module are affected. This module was added in version v0.49.0 of the “Contrib” distribution (or may be included in custom builds). There is a risk of unauthorized users writing metrics. Carefully crafted metrics could hide other malicious activity. There is no risk of exfiltrating data. It’s likely these endpoints will be exposed to the public internet, as Firehose does not support private HTTP endpoints. A fix was introduced in PR #34847 and released with v0.108.0. All users are advised to upgrade. There are no known workarounds for this vulnerability. |
| The SchedulePress – Auto Post & Publish, Auto Social Share, Schedule Posts with Editorial Calendar & Missed Schedule Post Publisher plugin for WordPress is vulnerable to Full Path Disclosure in all versions up to, and including, 5.1.3. This is due the plugin utilizing the wpdeveloper library and leaving the demo files in place with display_errors on. This makes it possible for unauthenticated attackers to retrieve the full path of the web application, which can be used to aid other attacks. The information displayed is not useful on its own, and requires another vulnerability to be present for damage to an affected website. |
| Minder by Stacklok is an open source software supply chain security platform. A refactoring in commit `5c381cf` added the ability to get GitHub repositories registered to a project without specifying a specific provider. Unfortunately, the SQL query for doing so was missing parenthesis, and would select a random repository. This issue is patched in pull request 2941. As a workaround, revert prior to `5c381cf`, or roll forward past `2eb94e7`. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Wp2speed WP2Speed Faster allows Accessing Functionality Not Properly Constrained by ACLs.This issue affects WP2Speed Faster: from n/a through 1.0.1. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in The Wikimedia Foundation Mediawiki - CentralAuth Extension allows Resource Leak Exposure.This issue affects Mediawiki - CentralAuth Extension: from master before 1.39. |