| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The PiWeb Cancel order / Refund request for WooCommerce WordPress plugin before 1.3.4.34 does not have authorization or ownership checks when adding the contents of a previous order to the cart, allowing unauthenticated users to disclose the contents of other customers' orders, as well as to clear and repopulate a logged in user's cart via a crafted link. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix kernel panic during driver load failure
Avoid kernel panic if MES init fails during driver load. The KIQ ring is
falsely marked as ready as ASICs that use MES, KIQ is owned by MES.
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:gfx_v12_1_wait_reg_mem+0x5a/0x1f0 [amdgpu]
Call Trace:
gfx_v12_1_ring_emit_reg_write_reg_wait+0x1f/0x30 [amdgpu]
amdgpu_gmc_fw_reg_write_reg_wait+0xb2/0x190 [amdgpu]
amdgpu_gmc_flush_gpu_tlb+0x1cc/0x230 [amdgpu]
amdgpu_gart_invalidate_tlb+0x81/0xa0 [amdgpu]
amdgpu_gart_unbind+0x72/0x90 [amdgpu]
amdgpu_ttm_backend_unbind+0xa4/0xb0 [amdgpu]
amdgpu_ttm_tt_unpopulate+0x13/0xd0 [amdgpu]
amdttm_tt_unpopulate+0x29/0x70 [amdttm]
ttm_bo_put+0x1eb/0x360 [amdttm]
amdgpu_bo_free_kernel+0xf9/0x1f0 [amdgpu]
amdgpu_ih_ring_fini+0x5a/0x90 [amdgpu]
amdgpu_irq_fini_hw+0x58/0x80 [amdgpu]
amdgpu_device_fini_hw+0x4e0/0x5b0 [amdgpu]
amdgpu_driver_load_kms+0x60/0xa0 [amdgpu]
amdgpu_pci_probe+0x28e/0x6d0 [amdgpu]
pci_device_probe+0x19f/0x220
really_probe+0x1ed/0x340
driver_probe_device+0x1e/0x80
__driver_attach+0xd3/0x1a0
bus_for_each_dev+0x68/0xa0
bus_add_driver+0x19f/0x270
driver_register+0x5d/0xf0
do_one_initcall+0xac/0x200
do_init_module+0x1ec/0x280
__se_sys_finit_module+0x2de/0x310
do_syscall_64+0x6a/0x250
entry_SYSCALL_64_after_hwframe+0x4b/0x53
(cherry picked from commit 4623b958dd6da0f4c3026afdf330626a09ecb0f0) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx10: replace BUG_ON() with WARN_ON()
There's no need to crash the kernel for these cases.
(cherry picked from commit ac6f00beb658239bced4aaed9efbb04a35348d48) |
| In the Linux kernel, the following vulnerability has been resolved:
ovpn: fix peer refcount leak in TCP error paths
When either the TCP RX or TX error path calls ovpn_peer_hold() followed
by schedule_work(&peer->tcp.defer_del_work), and the work item is already
pending from the other path, schedule_work() returns false and the work
runs only once. Since ovpn_tcp_peer_del_work() calls ovpn_peer_put()
exactly once, the extra reference taken by the losing path is never
dropped, leaking the peer object.
The race window:
CPU0 (strparser/RX error): CPU1 (tcp_tx_work/TX error):
ovpn_peer_hold() <- refcnt+1 ovpn_peer_hold() <- refcnt+2
schedule_work() <- queued schedule_work() <- NO-OP
(work already pending)
ovpn_tcp_peer_del_work runs:
ovpn_peer_del()
ovpn_peer_put() <- refcnt+1
<- peer never freed
Fix by checking the return value of schedule_work() in both paths and
calling ovpn_peer_put() to drop the extra reference if the work was
already pending. ovpn_peer_hold() is kept unconditional in the TX path
as it cannot fail at that point. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gpusvm: Fix MM reference leak in drm_gpusvm_range_evict
If kvmalloc_array() fails in drm_gpusvm_range_evict(), the MM
reference acquired earlier is not released, resulting in a reference
leak.
Fix this by dropping the MM reference on the kvmalloc_array()
failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/ttm: Account for NULL and handle pages in ttm_pool_backup
Pages in ttm_pool_backup can be NULL or backup handles
(ttm_backup_page_ptr_is_handle()), neither of which can be passed to
set_pages_array_wb() or freed. Add a dedicated WB pass before the
dma/purge loop that walks allocations using the same i += num_pages
stride, skipping NULL and handle entries, and calls set_pages_array_wb()
once per contiguous run of real pages. Apply the same NULL/handle guard
to the dma/purge loop.
Fixes the following oops:
Oops: general protection fault, kernel NULL pointer dereference 0x0: 0000 [#1] SMP NOPTI
RIP: 0010:__cpa_process_fault+0xf8/0x770
RSP: 0018:ffffc90000a87718 EFLAGS: 00010287
RAX: 0000000000000000 RBX: ffffc90000a87868 RCX: 0000000000000000
RDX: 0000000000001000 RSI: 0005088000000000 RDI: ffffffff827c5f34
RBP: 0005088000000000 R08: ffffc90000a877cb R09: ffffc90000a877d0
R10: 0000000000000000 R11: 000000000000001b R12: 000ffffffffff000
R13: ffffc90000a87868 R14: ffffc90000a87868 R15: ffff88815b882ae0
FS: 0000000000000000(0000) GS:ffff8884ec840000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f930b844000 CR3: 000000000262e003 CR4: 0000000008f70ef0
PKRU: 55555554
Call Trace:
<TASK>
__change_page_attr_set_clr+0x989/0xe90
? __purge_vmap_area_lazy+0x6c/0x3a0
? _vm_unmap_aliases+0x250/0x2a0
set_pages_array_wb+0x7f/0x120
ttm_pool_backup+0x4c9/0x5b0 [ttm]
? dma_resv_wait_timeout+0x3b/0xf0
ttm_tt_backup+0x32/0x60 [ttm]
ttm_bo_shrink+0x66/0x110 [ttm]
xe_bo_shrink_purge+0x12b/0x1b0 [xe]
xe_bo_shrink+0xbb/0x270 [xe]
__xe_shrinker_walk+0xf7/0x160 [xe]
xe_shrinker_walk+0x9d/0xc0 [xe]
xe_shrinker_scan+0x11f/0x210 [xe]
do_shrink_slab+0x13b/0x270
shrink_slab+0xf1/0x400
shrink_node+0x352/0x8a0
balance_pgdat+0x32c/0x700
kswapd+0x205/0x2f0
? __pfx_autoremove_wake_function+0x10/0x10
? __pfx_kswapd+0x10/0x10
kthread+0xd1/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x1b1/0x200
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK> |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Check bounds in allocate_event_notification_slot
The valid event ids go from 0 to KFD_SIGNAL_EVENT_LIMIT
allocate_event_notification_slot has an option to specify
an event id to allocate at, used by CRIU. We weren't checking
the bounds on that value.
Check them.
v2: Lower bounds check is unecessary because of idr_alloc
already rejecting negative numbers. Upper bounds check should
be KFD_SIGNAL_EVENT_LIMIT since the signal mode mappings might
not yet exist
(cherry picked from commit 6853f1f6cbbeb3f53ebbbd7286536aeb2c5d5f50) |
| The LWS Optimize WordPress plugin before 4.1.2 does not properly escape a value submitted through an unauthenticated analytics endpoint before storing it and rendering it in an administrative dashboard, allowing unauthenticated attackers to inject arbitrary web scripts that execute when an administrator views the affected dashboard page. |
| The WP MAPS PRO WordPress plugin before 6.1.3 does not perform a capability check in one of its AJAX actions, which is also available to unauthenticated users, and does not restrict the operation it dispatches, allowing unauthenticated attackers to trigger uncontrolled recursion that exhausts server resources, resulting in a Denial of Service. |
| An Out-of-bounds Write vulnerability in WatchGuard Fireware OS's CLI could allow an authenticated privileged user to execute arbitrary code via a specially crafted CLI command. |
| An Out-of-bounds Write vulnerability in WatchGuard Fireware OS networkd process could allow an authenticated privileged user to execute arbitrary code via a specially crafted requests to the Management Web UI. |
| A path traversal vulnerability in the WatchGuard Fireware OS Management Web UI allows a privileged authenticated attacker to write arbitrary files on the Firebox's filesystem. |
| The JetEngine WordPress plugin before 3.8.13.1 does not sanitise uploaded SVG files before storing and serving them, and does not adequately restrict who can upload them, allowing unauthenticated attackers to upload a file containing malicious JavaScript that executes in the browser of any user who opens it (Stored Cross-Site Scripting). |
| The Login & Register Forms WordPress plugin before 4.0.2 does not verify that a password reset request comes from the account's owner, and does not adequately redact the address returned in its response, allowing unauthenticated users to obtain registered users' email addresses, including administrators'. |
| Consul Community Edition and Consul Enterprise 1.19.1 through 2.0.2 did not enforce the {{session:write}} ACL permission for session deletion operations submitted through the transaction API. An authenticated caller with network access to the Consul server RPC port could delete arbitrary sessions without holding the required permission. This vulnerability, CVE-2026-19016, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| Consul Community Edition and Consul Enterprise 1.17.0 through 2.0.2 are vulnerable to an uncontrolled resource consumption issue in the Connect authorization endpoint that may allow a caller to grow the agent's intention-match cache without bound, defeating the operator's cache-disable configuration. This vulnerability, CVE-2026-190124, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| Consul Community Edition and Consul Enterprise 1.18.0 through 2.0.2 are vulnerable to an authenticated denial of service in the Enterprise-to-Community Edition downgrade path that may allow an authorized caller to crash the Consul server. A caller with config-entry write permission can submit a service-router configuration entry that causes the agent to exit unexpectedly. This vulnerability, CVE-2026-19012, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| Consul Community Edition and Consul Enterprise 1.20.1 through 2.0.2 are vulnerable to an L7 intention authorization bypass when a service proxy is configured with a custom public listener. An authenticated mesh workload may reach HTTP paths that are blocked by a path-based deny intention. This vulnerability, CVE-2026-15970, is fixed in Consul 2.0.3 and Consul Enterprise 1.21.17, 1.22.11, and 2.0.3. |
| The Saitama Addon Pack WordPress plugin through 1.0.8 does not sanitise and escape certain post metadata values before outputting them, allowing users with contributor-level access and above to inject stored Cross-Site Scripting payloads that execute in the browser of a higher-privileged user who reviews the content. |
| In the Linux kernel, the following vulnerability has been resolved:
comedi: comedi_parport: deal with premature interrupt
Syzbot reported a general protection fault in
`comedi_get_is_subdevice_running()`, which was called from the interrupt
handler `parport_interrupt()` in the "comedi_parport" driver, but it
does not currently have a C reproducer for the problem. It's
probably due to a premature interrupt for one of two reasons:
1. The driver sets up the interrupt handler before the comedi subdevices
used by the interrupt handler have been allocated, but does not
disable the interrupt in the parallel port's CTRL register first.
2. The driver uses a user-supplied I/O port base address which Syzbot
would have supplied, but it might not be backed by real parallel port
hardware.
Change the initialization order in the driver's comedi "attach" handler
(`parport_attach()`) so that the hardware registers are initialized
before the interrupt handler is requested. This should prevent
premature interrupts occurring for real hardware.
Also add a test to the interrupt handler to ensure the comedi device is
fully attached and return early if it isn't. |
