| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| RabbitMQ is a messaging and streaming broker. From 4.2.0 until 4.2.9 and 4.3.3, OAuth2 isinteger(Exp) guard skips token-expiry checks for float exp. validatetokenexpiry/1 (lines 208-214) and expirytimestamp/1 (138-144) both guard with 'when isinteger(Exp)' and fall through to ok/never for float values. josejwt:verify validates only the signature, not exp. With float exp, no expiry validation occurs anywhere in the If the IdP emits exp as a JSON float (RFC 7519 permits fractional NumericDate), both the login-time expiry check and the mid-connection disconnect timer are silently skipped , an already-expired token is accepted, and connections never time OAuth2 backend enabled IdP emits float exp (uncommon; mainstream IdPs emit integers) Attacker possesses a previously-valid signed. This issue is fixed in versions 4.2.9 and 4.3.3. |
| RabbitMQ is a messaging and streaming broker. From 3.13.0 until 4.3.3, 4.2.9 , 4.1.14, 4.0.24, and 3.13.18, Federation upstream in RabbitMQ skips vhost authorization allowing cross-vhost message access. what the bug lets you do. A policymaker on one vhost reads and drains messages out of another vhost it has no permission on. With the default ack-mode the source messages are consumed (deleted), not copied. Why that should not 1. Federation validates the upstream URI without any vhost-access Cross-vhost message read/drain from a per-vhost policymaker, breaking vhost tenancy This issue is fixed in versions 4.3.3, 4.2.9 , 4.1.14, 4.0.24, and 3.13.18. |
| Zammad is a web based open source helpdesk/customer support system. Prior to 7.0.2, summary An issue with permission checks in the knowledge base management area has been identified. Under certain conditions, data validation for linked items was not fully enforced. This could have allowed users with limited read permissions to interact with items outside their assigned access scope. Data access has been strengthened in the current version through additional validation routines. This issue is fixed in version 7.0.2. |
| Zammad is a web based open source helpdesk/customer support system. Prior to 7.0.2, a broken access control vulnerability exists in Zammad's GraphQL API. An authenticated user can access taskbar item data belonging to another user by crafting a request with the target user's taskbar identifier. The taskbar feature stores transient state for active user sessions, including auto-saved ticket drafts. Under certain conditions, the authorization check for taskbar item access is not enforced, allowing a user to read another user's taskbar item data. This vulnerability is fixed in 7.0.2. |
| Zammad is a web based open source helpdesk/customer support system. Prior to 7.1.2, zammad's External Data Source feature, used to look up records from an external system, did not properly verify whether a user was allowed to see a specific ticket, user, group, or organization before including its details in a request to that external system. An authenticated user, including one with only basic customer access, could exploit this by referencing another record's ID, and thereby view details of tickets, customer accounts, teams, or organizations that did not belong to them. This issue is fixed in version 7.1.2. |
| Zammad is a web based open source helpdesk/customer support system. Prior to 7.1.2, an authenticated user with agent permissions can supply an arbitrary AI analytics run identifier to the ticket summarize endpoint and receive the AI provider error message stored for that run, even if the run belongs to a ticket the agent is not authorized to access. The disclosure is limited to the provider error string; ticket content is not exposed. This issue is fixed in version 7.1.2. |
| Cotonti through 1.0.0 contains an open redirect vulnerability in message.php that base64-decodes the redirect parameter without domain validation. Unauthenticated attackers can craft malicious links with encoded external URLs to redirect users to arbitrary sites via meta refresh tags for phishing attacks. |
| On Windows, PHP's filesystem and stream APIs do not reject reserved device names such as CON, PRN, AUX, NUL, COM1 to COM9, LPT1 to LPT9, CONIN$ and CONOUT$ when they appear as a component of a path. An attacker-controlled filename therefore reaches CreateFileW() and opens a device instead of the regular file the application expected, which can block or hang the request and exhaust worker processes. |
| An authorization bypass vulnerability in the FileMaker Server Web Publishing Engine allowed requests containing an extended privilege header to bypass the disabled Custom Web Publishing with XML setting and access the XML Web Publishing interface. This vulnerability is addressed in FileMaker Server version 26.0.3. |
| A DLL hijacking vulnerability in the FileMaker Pro installer for Windows allowed a local user to execute arbitrary code with elevated administrator privileges by placing a malicious DLL file in the installer directory. This vulnerability is addressed in FileMaker Pro version 26.0.3. |
| In the Linux kernel, the following vulnerability has been resolved:
smb/client: zero-initialize stack-allocated cifs_open_info_data
Stack-allocated cifs_open_info_data may contain random data.
This can make some fields have wrong value if they are not set later. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: remove stale namespaces by NSID range during scan
nvme_scan_ns_list() drops the stale namespaces in each gap in the
reported NSID list one NSID at a time. Every iteration calls
nvme_find_get_ns() to look the namespace up and removes it if it is
present. The loop runs once per NSID in the gap rather than once per
namespace actually present.
NSIDs are 32-bit, so a target with a sparse NSID space can make a
single gap spin the loop billions of times with nothing to remove.
watchdog: BUG: soft lockup - CPU#4 stuck for 26s!
Workqueue: nvme-wq nvme_scan_work [nvme_core]
RIP: 0010:__srcu_read_unlock+0xb/0x20
Call Trace:
nvme_find_get_ns+0x7d/0xb0 [nvme_core]
nvme_scan_ns_list+0xe8/0x280 [nvme_core]
nvme_scan_work+0x18a/0x280 [nvme_core]
process_one_work+0x197/0x380
worker_thread+0x2fe/0x410
kthread+0xe0/0x100
Rename nvme_remove_invalid_namespaces() to nvme_remove_nsid_range()
and give it an open (start, end) NSID range. ctrl->namespaces is
sorted by NSID, so the whole gap is dropped in a single walk that
stops once end is reached. This bounds the work by the namespaces
that are present instead of by the size of the gap. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme-fc: Do not cancel requests in io target before it is initialized
A new nvme-fc controller in CONNECTING state sees admin request timeout
schedules ctrl->ioerr_work to abort inflight requests. This ends up
calling __nvme_fc_abort_outstanding_ios() which aborts requests in both
admin and io tagsets. In case fc_ctrl->tag_set was not initialized we
see the warning below. This is because ctrl.queue_count is initialized
early in nvme_fc_alloc_ctrl().
nvme nvme0: NVME-FC{0}: starting error recovery Connectivity Loss
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
lpfc 0000:ab:00.0: queue 0 connect admin queue failed (-6).
you didn't initialize this object before use?
turning off the locking correctness validator.
Workqueue: nvme-reset-wq nvme_fc_ctrl_ioerr_work [nvme_fc]
Call Trace:
<TASK>
dump_stack_lvl+0x57/0x80
register_lock_class+0x567/0x580
__lock_acquire+0x330/0xb90
lock_acquire.part.0+0xad/0x210
blk_mq_tagset_busy_iter+0xf9/0xc00
__nvme_fc_abort_outstanding_ios+0x23f/0x320 [nvme_fc]
nvme_fc_ctrl_ioerr_work+0x172/0x210 [nvme_fc]
process_one_work+0x82c/0x1450
worker_thread+0x5ee/0xfd0
kthread+0x3a0/0x750
ret_from_fork+0x439/0x670
ret_from_fork_asm+0x1a/0x30
</TASK>
Update the check in __nvme_fc_abort_outstanding_ios() confirm that io
tagset was created before iterating over busy requests. Also make sure
to cancel ctrl->ioerr_work before removing io tagset. |
| In the Linux kernel, the following vulnerability has been resolved:
ACPICA: add boundary checks in acpi_ps_get_next_field()
Add boundary checks in acpi_ps_get_next_field() to prevent out-of-bounds
access. |
| e621ng versions before 26.09.16 pass untrusted request parameters directly to Rails url_for in PaginatorComponent and controller navigation links, allowing attackers to redirect pagination and navigation controls to attacker-controlled origins. Attackers can supply host, protocol, and port query parameters that are interpreted as URL generation options, causing pagination links to point to malicious domains while the initial page loads from the legitimate site. |
| Nautobot is a Network Source of Truth and Network Automation Platform. From 3.0.0 until 3.1.8, the generic ApprovalWorkflowStageResponse create endpoint does not enforce approver-group membership, change permission on the object under review, or the one-response-per-user restriction applied by the intended approve and deny actions. A user with only extras.add_approvalworkflowstageresponse can submit approved responses directly, while writable user and state fields permit responses to be attributed to arbitrary users. These forged responses can satisfy min_approvers, approve the workflow, and activate its gated ScheduledJob without a legitimate approver. This issue is fixed in version 3.1.8. |
| The Bookly WordPress plugin before 28.3 does not properly verify a customer's identity before updating their stored details, allowing unauthenticated attackers who know a customer's primary identifier to overwrite that customer's stored personal information such as name, email and address. |
| Notepad++ is a free and open-source source code editor. Prior to 8.9.8, Notepad++ incompletely enforces shortcuts.xml HMAC validation because WM_MACRODLGRUNMACRO, the Run a Macro Multiple Times entry point, calls macroPlayback() without the validation used by command(). A tampered shortcuts.xml macro that is blocked through the Macro menu or a shortcut key can therefore execute through the multi-run dialog and invoke internal Notepad++ commands, including commands that launch external programs, in the current user context. This issue is fixed in version 8.9.8. |
| Apache Airflow HashiCorp provider: the HashiCorp Vault secrets backend's team-scope guard can be bypassed with a user-controlled key. In a multi-team deployment, a Dag author scoped to one team can supply a Variable key containing a path separator that causes the backend to resolve a secret belonging to a different team, because after the team-scoped lookup misses the backend falls back to a team-agnostic path concatenated from the unvalidated key. The Execution API Variables route accepts a path-shaped key, so this is reachable from ordinary Dag code.
Affects multi-team deployments using the HashiCorp Vault secrets backend. Single-team deployments are not affected, as there is no cross-team boundary to cross. This is the same class as CVE-2026-86465, CVE-2026-68870, CVE-2026-68871 and CVE-2026-68872 in the Akeyless, Azure Key Vault, Yandex Lockbox and Amazon secrets backends.
Users of apache-airflow-providers-hashicorp are recommended to upgrade to version 4.8.0 or later, which fixes the issue. |
| js-toml is a TOML parser for JavaScript. Prior to 1.1.3, load() does not bound nesting or dotted-key depth in the recursive parser at src/load/parser.ts or the interpreter at src/load/interpreter.ts, so deeply nested arrays, deeply nested inline tables, or long dotted keys can exhaust the V8 call stack and throw a raw RangeError instead of the documented SyntaxParseError. Applications that parse attacker-controlled TOML and handle only SyntaxParseError can rethrow the unexpected exception, which can terminate a worker or process and cause denial of service. The exception is synchronous and catchable by consumers that handle all exceptions, and the issue does not affect confidentiality or integrity. This issue is fixed in version 1.1.3. |
