| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability was found in MariaDB. An OpenVAS port scan on ports 3306 and 4567 allows a malicious remote client to cause a denial of service. |
| IncusOS is an immutable OS image dedicated to running Incus. Prior to 202603142010, the default configuration of systemd-cryptenroll as used by IncusOS through mkosi allows for an attacker with physical access to the machine to access the encrypted data without requiring any interaction by the system's owner or any tampering of Secure Boot state or kernel (UKI) boot image. That's because in this configuration, the LUKS key is made available by the TPM so long as the system has the expected PCR7 value and the PCR11 policy matches. That default PCR11 policy importantly allows for the TPM to release the key to the booted system rather than just from the initrd part of the signed kernel image (UKI). The attack relies on the attacker being able to substitute the original encrypted root partition for one that they control. By doing so, the system will prompt for a recovery key on boot, which the attacker has defined and can provide, before booting the system using the attacker's root partition rather than the system's original one. The attacker only needs to put a systemd unit starting on system boot within their root partition to have the system run that logic on boot. That unit will then run in an environment where the TPM will allow for the retrieval of the encryption key of the real root disk, allowing the attacker to steal the LUKS volume key (immutable master key) and then use it against the real root disk, altering it or getting data out before putting the disk back the way it was and returning the system without a trace of this attack having happened. This is all possible because the system will have still booted with Secure Boot enabled, will have measured and ran the expected bootloader and kernel image (UKI). The initrd selects the root disk based on GPT partition identifiers making it possible to easily substitute the real root disk for an attacker controlled one. This doesn't lead to any change in the TPM state and therefore allows for retrieval of the LUKS key by the attacker through a boot time systemd unit on their alternative root partition. IncusOS version 202603142010 (2026/03/14 20:10 UTC) includes the new PCR15 logic and will automatically update the TPM policy on boot. Anyone suspecting that their system may have been physically accessed while shut down should perform a full system wipe and reinstallation as only that will rotate the LUKS volume key and prevent subsequent access to the encrypted data should the system have been previously compromised. There are no known workarounds other than updating to a version with corrected logic which will automatically rebind the LUKS keys to the new set of TPM registers and prevent this from being exploited. |
| Craft CMS is a content management system (CMS). From version 4.0.0-RC1 to before version 4.17.6 and from version 5.0.0-RC1 to before version 5.9.12, a low-privilege user (or an unauthenticated user who has been sent a shared URL) can escalate their privileges to admin by abusing UsersController->actionImpersonateWithToken. This issue has been patched in versions 4.17.6 and 5.9.12. |
| cpp-httplib is a C++11 single-file header-only cross platform HTTP/HTTPS library. Prior to 0.37.1, when a cpp-httplib client uses the streaming API (httplib::stream::Get, httplib::stream::Post, etc.), the library calls std::stoull() directly on the Content-Length header value received from the server with no input validation and no exception handling. std::stoull throws std::invalid_argument for non-numeric strings and std::out_of_range for values exceeding ULLONG_MAX. Since nothing catches these exceptions, the C++ runtime calls std::terminate(), which kills the process with SIGABRT. Any server the client connects to — including servers reached via HTTP redirects, third-party APIs, or man-in-the-middle positions can crash the client application with a single HTTP response. No authentication is required. No interaction from the end user is required. The crash is deterministic and immediate. This vulnerability is fixed in 0.37.1. |
| The Writeprint Stylometry plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'p' GET parameter in all versions up to and including 0.1. This is due to insufficient input sanitization and output escaping in the bjl_wprintstylo_comments_nav() function. The function directly outputs the $_GET['p'] parameter into an HTML href attribute without any escaping. This makes it possible for authenticated attackers with Contributor-level permissions or higher to inject arbitrary web scripts in pages that execute if they can successfully trick another user into performing an action such as clicking on a link. |
| Glances is an open-source system cross-platform monitoring tool. The GHSA-gh4x fix (commit 5d3de60) addressed unauthenticated configuration secrets exposure on the `/api/v4/config` endpoints by introducing `as_dict_secure()` redaction. However, the `/api/v4/args` and `/api/v4/args/{item}` endpoints were not addressed by this fix. These endpoints return the complete command-line arguments namespace via `vars(self.args)`, which includes the password hash (salt + pbkdf2_hmac), SNMP community strings, SNMP authentication keys, and the configuration file path. When Glances runs without `--password` (the default), these endpoints are accessible without any authentication. Version 4.5.2 provides a more complete fix. |
| Next Click Ventures RealtyScript 4.0.2 contains SQL injection vulnerabilities that allow unauthenticated attackers to manipulate database queries by injecting arbitrary SQL code through the GET parameter 'u_id' in /admin/users.php and the POST parameter 'agent[]' in /admin/mailer.php. Attackers can exploit time-based blind SQL injection techniques to extract sensitive database information or cause denial of service through sleep-based payloads. |
| Dagu is a workflow engine with a built-in Web user interface. Prior to 2.2.4, the dagRunId request field accepted by the inline DAG execution endpoints is passed directly into filepath.Join to construct a temporary directory path without any format validation. Go's filepath.Join resolves .. segments lexically, so a caller can supply a value such as ".." to redirect the computed directory outside the intended /tmp/<name>/<id> path. A deferred cleanup function that calls os.RemoveAll on that directory then runs unconditionally when the HTTP handler returns, deleting whatever directory the traversal resolved to. With dagRunId set to "..", the resolved directory is the system temporary directory (/tmp on Linux). On non-root deployments, os.RemoveAll("/tmp") removes all files in /tmp owned by the dagu process user, disrupting every concurrent dagu run that has live temp files. On root or Docker deployments, the call removes the entire contents of /tmp, causing a system-wide denial of service. This vulnerability is fixed in 2.2.4. |
| CairoSVG is an SVG converter based on Cairo, a 2D graphics library. Prior to Kozea/CairoSVG has exponential denial of service via recursive <use> element amplification in cairosvg/defs.py. This causes CPU exhaustion from a small input. |
| A flaw was found in Keycloak. A remote attacker could bypass security controls by sending a valid SAML response from an external Identity Provider (IdP) to the Keycloak SAML endpoint for IdP-initiated broker logins. This allows the attacker to complete broker logins even when the SAML Identity Provider is disabled, leading to unauthorized authentication. |
| xiaoheiFS is a self-hosted financial and operational system for cloud service businesses. In versions up to and including 0.3.15, the `AdminPaymentPluginUpload` endpoint lets admins upload any file to `plugins/payment/`. It only checks a hardcoded password (`qweasd123456`) and ignores file content. A background watcher (`StartWatcher`) then scans this folder every 5 seconds. If it finds a new executable, it runs it immediately, resulting in RCE. Version 4.0.0 fixes the issue. |
| xiaoheiFS is a self-hosted financial and operational system for cloud service businesses. In versions up to and including 0.3.15, the standard plugin system allows admins to upload a ZIP file containing a binary and a `manifest.json`. The server trusts the `binaries` field in the manifest and executes the specified file without any validation of its contents or behavior, leading to Remote Code Execution (RCE). Version 0.4.0 fixes the issue. |
| Wazuh is a free and open source platform used for threat prevention, detection, and response. Starting in version 3.9.0 and prior to version 4.14.3, multiple stack-based buffer overflows exist in the Security Configuration Assessment (SCA) decoder (`wazuh-analysisd`). The use of `sprintf` with a floating-point (`%lf`) format specifier on a fixed-size 128-byte buffer allows a remote attacker to overflow the stack. A specially crafted JSON event can trigger this overflow, leading to a denial of service (crash) or potential RCE on the Wazuh manager. The vulnerability is located in `/src/analysisd/decoders/security_configuration_assessment.c`, within the `FillScanInfo` and `FillCheckEventInfo` functions. In multiple locations, a 128-byte buffer (`char value[OS_SIZE_128];`) is allocated on the stack to hold the string representation of a number from a JSON event. The code checks if the number is an integer or a double. If it's a double, it uses `sprintf(value, "%lf", ...)` to perform the conversion. This `sprintf` call is unbounded. If a floating-point number with a large exponent (e.g., `1.0e150`) is provided, `sprintf` will attempt to write its full string representation (a "1" followed by 150 zeros), which is larger than the 128-byte buffer, corrupting the stack. Version 4.14.3 patches the issue. |
| Vulnerability in the Oracle Edge Cloud Infrastructure Designer and Visualisation Toolkit product of Oracle Open Source Projects (component: Desktop). The supported version that is affected is 0.3.0. Easily exploitable vulnerability allows unauthenticated attacker with network access via HTTP to compromise Oracle Edge Cloud Infrastructure Designer and Visualisation Toolkit. Successful attacks of this vulnerability can result in takeover of Oracle Edge Cloud Infrastructure Designer and Visualisation Toolkit. CVSS 3.1 Base Score 9.8 (Confidentiality, Integrity and Availability impacts). CVSS Vector: (CVSS:3.1/AV:N/AC:L/PR:N/UI:N/S:U/C:H/I:H/A:H). |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in BZOTheme PrintXtore allows PHP Local File Inclusion.This issue affects PrintXtore: from n/a before 1.7.8. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in BZOTheme GiftXtore allows PHP Local File Inclusion.This issue affects GiftXtore: from n/a before 1.7.7. |
| Improper Control of Filename for Include/Require Statement in PHP Program ('PHP Remote File Inclusion') vulnerability in BZOTheme Petito allows PHP Local File Inclusion.This issue affects Petito: from n/a before 1.6.6. |
| A vulnerability was detected in TRENDnet TEW-713RE 1.02. The impacted element is an unknown function of the file /goformX/formFSrvX. The manipulation of the argument SZCMD results in os command injection. It is possible to launch the attack remotely. The exploit is now public and may be used. The vendor confirms: "The product in question TEW-731RE for CVE-2025-15471 has been discontinued and end of life since October 23, 2020. We no longer provide support for this product, so we are not able to confirm the vulnerabilities. We will make an announcement on the website product support page and notify customers who registered their products with us." This vulnerability only affects products that are no longer supported by the maintainer. |
| EPyT-Flow is a Python package designed for the easy generation of hydraulic and water quality scenario data of water distribution networks. Prior to 0.16.1, EPyT-Flow’s REST API parses attacker-controlled JSON request bodies using a custom deserializer (my_load_from_json) that supports a type field. When type is present, the deserializer dynamically imports an attacker-specified module/class and instantiates it with attacker-supplied arguments. This allows invoking dangerous classes such as subprocess.Popen, which can lead to OS command execution during JSON parsing. This also affects the loading of JSON files. This vulnerability is fixed in 0.16.1. |
| Dark Reader is an accessibility browser extension that makes web pages colors dark. The dynamic dark mode feature of the extension works by analyzing the colors of web pages found in CSS style sheet files. In order to analyze cross-origin style sheets (stored on websites different from the original web page), Dark Reader requests such files via a background worker, ensuring the request is performed with no credentials and that the content type of the response is a CSS file. Prior to Dark Reader 4.9.117, this style content was assigned to an HTML Style Element in order to parse and loop through style declarations, and also stored in page's Session Storage for performance gains. This could allow a website author to request a style sheet from a locally running web server, for example by having a link pointing to `http[:]//localhost[:]8080/style[.]css`. The brute force of the host name, port and file name would be unlikely due to performance impact, that would cause the browser tab to hang shortly, but it could be possible to request a style sheet if the full URL was known in advance. As per December 18, 2025 there is no known exploit of the issue. The problem has been fixed in version 4.9.117 on December 3, 2025. The style sheets are now parsed using modern Constructed Style Sheets API and the contents of cross-origin style sheets is no longer stored in page's Session Storage. Version 4.9.118 (December 8, 2025) restricts cross-origin requests to localhost aliases, IP addresses, hosts with ports and non-HTTPS resources. The absolute majority of users have received an update 4.1.117 or 4.9.118 automatically within a week. However users must ensure their automatic updates are not blocked and they are using the latest version of the extension by going to chrome://extensions or about:addons pages in browser settings. Users utilizing manual builds must upgrade to version 4.9.118 and above. Developers using `darkreader` NPM package for their own websites are likely not affected, but must ensure the function passed to `setFetchMethod()` for performing cross-origin requests works within the intended scope. Developers using custom forks of earlier versions of Dark Reader to build other extensions or integrating into their apps or browsers must ensure they perform cross-origin requests safely and the responses are not accessible outside of the app or extension. |
