| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
rust_binder: avoid reading the written value in offsets array
When sending a transaction, its offsets array is first copied into the
target proc's vma, and then the values are read back from there. This is
normally fine because the vma is a read-only mapping, so the target
process cannot change the value under us.
However, if the target process somehow gains the ability to write to its
own vma, it could change the offset before it's read back, causing the
kernel to misinterpret what the sender meant. If the sender happens to
send a payload with a specific shape, this could in the worst case lead
to the receiver being able to privilege escalate into the sender.
The intent is that gaining the ability to change the read-only vma of
your own process should not be exploitable, so remove this TOCTOU read
even though it's unexploitable without another Binder bug. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Remove redundant css_put() in scx_cgroup_init()
The iterator css_for_each_descendant_pre() walks the cgroup hierarchy
under cgroup_lock(). It does not increment the reference counts on
yielded css structs.
According to the cgroup documentation, css_put() should only be used
to release a reference obtained via css_get() or css_tryget_online().
Since the iterator does not use either of these to acquire a reference,
calling css_put() in the error path of scx_cgroup_init() causes a
refcount underflow.
Remove the unbalanced css_put() to prevent a potential Use-After-Free
(UAF) vulnerability. |
| In the Linux kernel, the following vulnerability has been resolved:
cgroup: fix race between task migration and iteration
When a task is migrated out of a css_set, cgroup_migrate_add_task()
first moves it from cset->tasks to cset->mg_tasks via:
list_move_tail(&task->cg_list, &cset->mg_tasks);
If a css_task_iter currently has it->task_pos pointing to this task,
css_set_move_task() calls css_task_iter_skip() to keep the iterator
valid. However, since the task has already been moved to ->mg_tasks,
the iterator is advanced relative to the mg_tasks list instead of the
original tasks list. As a result, remaining tasks on cset->tasks, as
well as tasks queued on cset->mg_tasks, can be skipped by iteration.
Fix this by calling css_set_skip_task_iters() before unlinking
task->cg_list from cset->tasks. This advances all active iterators to
the next task on cset->tasks, so iteration continues correctly even
when a task is concurrently being migrated.
This race is hard to hit in practice without instrumentation, but it
can be reproduced by artificially slowing down cgroup_procs_show().
For example, on an Android device a temporary
/sys/kernel/cgroup/cgroup_test knob can be added to inject a delay
into cgroup_procs_show(), and then:
1) Spawn three long-running tasks (PIDs 101, 102, 103).
2) Create a test cgroup and move the tasks into it.
3) Enable a large delay via /sys/kernel/cgroup/cgroup_test.
4) In one shell, read cgroup.procs from the test cgroup.
5) Within the delay window, in another shell migrate PID 102 by
writing it to a different cgroup.procs file.
Under this setup, cgroup.procs can intermittently show only PID 101
while skipping PID 103. Once the migration completes, reading the
file again shows all tasks as expected.
Note that this change does not allow removing the existing
css_set_skip_task_iters() call in css_set_move_task(). The new call
in cgroup_migrate_add_task() only handles iterators that are racing
with migration while the task is still on cset->tasks. Iterators may
also start after the task has been moved to cset->mg_tasks. If we
dropped css_set_skip_task_iters() from css_set_move_task(), such
iterators could keep task_pos pointing to a migrating task, causing
css_task_iter_advance() to malfunction on the destination css_set,
up to and including crashes or infinite loops.
The race window between migration and iteration is very small, and
css_task_iter is not on a hot path. In the worst case, when an
iterator is positioned on the first thread of the migrating process,
cgroup_migrate_add_task() may have to skip multiple tasks via
css_set_skip_task_iters(). However, this only happens when migration
and iteration actually race, so the performance impact is negligible
compared to the correctness fix provided here. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mana: Null service_wq on setup error to prevent double destroy
In mana_gd_setup() error path, set gc->service_wq to NULL after
destroy_workqueue() to match the cleanup in mana_gd_cleanup().
This prevents a use-after-free if the workqueue pointer is checked
after a failed setup. |
| In the Linux kernel, the following vulnerability has been resolved:
e1000/e1000e: Fix leak in DMA error cleanup
If an error is encountered while mapping TX buffers, the driver should
unmap any buffers already mapped for that skb.
Because count is incremented after a successful mapping, it will always
match the correct number of unmappings needed when dma_error is reached.
Decrementing count before the while loop in dma_error causes an
off-by-one error. If any mapping was successful before an unsuccessful
mapping, exactly one DMA mapping would leak.
In these commits, a faulty while condition caused an infinite loop in
dma_error:
Commit 03b1320dfcee ("e1000e: remove use of skb_dma_map from e1000e
driver")
Commit 602c0554d7b0 ("e1000: remove use of skb_dma_map from e1000 driver")
Commit c1fa347f20f1 ("e1000/e1000e/igb/igbvf/ixgb/ixgbe: Fix tests of
unsigned in *_tx_map()") fixed the infinite loop, but introduced the
off-by-one error.
This issue may still exist in the igbvf driver, but I did not address it
in this patch. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: x_tables: guard option walkers against 1-byte tail reads
When the last byte of options is a non-single-byte option kind, walkers
that advance with i += op[i + 1] ? : 1 can read op[i + 1] past the end
of the option area.
Add an explicit i == optlen - 1 check before dereferencing op[i + 1]
in xt_tcpudp and xt_dccp option walkers. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nft_set_pipapo: fix stack out-of-bounds read in pipapo_drop()
pipapo_drop() passes rulemap[i + 1].n to pipapo_unmap() as the
to_offset argument on every iteration, including the last one where
i == m->field_count - 1. This reads one element past the end of the
stack-allocated rulemap array (declared as rulemap[NFT_PIPAPO_MAX_FIELDS]
with NFT_PIPAPO_MAX_FIELDS == 16).
Although pipapo_unmap() returns early when is_last is true without
using the to_offset value, the argument is evaluated at the call site
before the function body executes, making this a genuine out-of-bounds
stack read confirmed by KASAN:
BUG: KASAN: stack-out-of-bounds in pipapo_drop+0x50c/0x57c [nf_tables]
Read of size 4 at addr ffff8000810e71a4
This frame has 1 object:
[32, 160) 'rulemap'
The buggy address is at offset 164 -- exactly 4 bytes past the end
of the rulemap array.
Pass 0 instead of rulemap[i + 1].n on the last iteration to avoid
the out-of-bounds read. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp: route: hold key->lock in mctp_flow_prepare_output()
mctp_flow_prepare_output() checks key->dev and may call
mctp_dev_set_key(), but it does not hold key->lock while doing so.
mctp_dev_set_key() and mctp_dev_release_key() are annotated with
__must_hold(&key->lock), so key->dev access is intended to be
serialized by key->lock. The mctp_sendmsg() transmit path reaches
mctp_flow_prepare_output() via mctp_local_output() -> mctp_dst_output()
without holding key->lock, so the check-and-set sequence is racy.
Example interleaving:
CPU0 CPU1
---- ----
mctp_flow_prepare_output(key, devA)
if (!key->dev) // sees NULL
mctp_flow_prepare_output(
key, devB)
if (!key->dev) // still NULL
mctp_dev_set_key(devB, key)
mctp_dev_hold(devB)
key->dev = devB
mctp_dev_set_key(devA, key)
mctp_dev_hold(devA)
key->dev = devA // overwrites devB
Now both devA and devB references were acquired, but only the final
key->dev value is tracked for release. One reference can be lost,
causing a resource leak as mctp_dev_release_key() would only decrease
the reference on one dev.
Fix by taking key->lock around the key->dev check and
mctp_dev_set_key() call. |
| In the Linux kernel, the following vulnerability has been resolved:
mctp: i2c: fix skb memory leak in receive path
When 'midev->allow_rx' is false, the newly allocated skb isn't consumed
by netif_rx(), it needs to free the skb directly. |
| OS command injection vulneravility in the management gui (maintenance utility) of Hitachi Virtual Storage Platform One Block 23, 24, 26 and 28.
This issue affects Hitachi Virtual Storage Platform One Block 23/24/26/28: before DKCMAIN A3-04-21-40/00, ESM A3-04-21/00. |
| ZTE Cloud PC client uSmartView contains a DLL hijacking vulnerability; since uSmartViewServiceAgent.exe runs with SYSTEM privileges, successful hijacking enables local arbitrary code execution, privilege escalation, and memory corruption.contains a DLL hijacking vulnerability; since uSmartViewServiceAgent.exe runs with SYSTEM privileges, successful hijacking enables local arbitrary code execution, privilege escalation, and memory corruption. |
| OpenEXR provides the specification and reference implementation of the EXR file format, an image storage format for the motion picture industry. From versions 3.0.0 to before 3.2.9, 3.3.0 to before 3.3.11, and 3.4.0 to before 3.4.11, IDManifest::init() reconstructs strings from a prefix-compressed representation. If the previous string is longer than 255 bytes, the next string is expected to begin with a 2-byte prefix length. The code reads stringList[i][0] and stringList[i][1] without checking that the current string has at least two bytes. This issue has been patched in versions 3.2.9, 3.3.11, and 3.4.11. |
| Out-of-bounds write vulnerability in The Document Foundation LibreOffice via crafted OOXML documents with mismatched encryption salt parameters.
This issue affects LibreOffice: from 26.2 before 26.2.3, from 25.8 before 25.8.7. |
| A code injection in Ivanti Endpoint Manager Mobile allowing attackers to achieve unauthenticated remote code execution. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: af_alg - Fix page reassignment overflow in af_alg_pull_tsgl
When page reassignment was added to af_alg_pull_tsgl the original
loop wasn't updated so it may try to reassign one more page than
necessary.
Add the check to the reassignment so that this does not happen.
Also update the comment which still refers to the obsolete offset
argument. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: icmp: fix null-ptr-deref in icmp_build_probe()
ipv6_stub->ipv6_dev_find() may return ERR_PTR(-EAFNOSUPPORT) when the
IPv6 stack is not active (CONFIG_IPV6=m and not loaded), and passing
this error pointer to dev_hold() will cause a kernel crash with
null-ptr-deref.
Instead, silently discard the request. RFC 8335 does not appear to
define a specific response for the case where an IPv6 interface
identifier is syntactically valid but the implementation cannot perform
the lookup at runtime, and silently dropping the request may safer than
misreporting "No Such Interface". |
| In the Linux kernel, the following vulnerability has been resolved:
serial: caif: hold tty->link reference in ldisc_open and ser_release
A reproducer triggers a KASAN slab-use-after-free in pty_write_room()
when caif_serial's TX path calls tty_write_room(). The faulting access
is on tty->link->port.
Hold an extra kref on tty->link for the lifetime of the caif_serial line
discipline: get it in ldisc_open() and drop it in ser_release(), and
also drop it on the ldisc_open() error path.
With this change applied, the reproducer no longer triggers the UAF in
my testing. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: soc-core: flush delayed work before removing DAIs and widgets
When a sound card is unbound while a PCM stream is open, a
use-after-free can occur in snd_soc_dapm_stream_event(), called from
the close_delayed_work workqueue handler.
During unbind, snd_soc_unbind_card() flushes delayed work and then
calls soc_cleanup_card_resources(). Inside cleanup,
snd_card_disconnect_sync() releases all PCM file descriptors, and
the resulting PCM close path can call snd_soc_dapm_stream_stop()
which schedules new delayed work with a pmdown_time timer delay.
Since this happens after the flush in snd_soc_unbind_card(), the
new work is not caught. soc_remove_link_components() then frees
DAPM widgets before this work fires, leading to the use-after-free.
The existing flush in soc_free_pcm_runtime() also cannot help as it
runs after soc_remove_link_components() has already freed the widgets.
Add a flush in soc_cleanup_card_resources() after
snd_card_disconnect_sync() (after which no new PCM closes can
schedule further delayed work) and before soc_remove_link_dais()
and soc_remove_link_components() (which tear down the structures the
delayed work accesses). |
| In the Linux kernel, the following vulnerability has been resolved:
rxrpc, afs: Fix missing error pointer check after rxrpc_kernel_lookup_peer()
rxrpc_kernel_lookup_peer() can also return error pointers in addition to
NULL, so just checking for NULL is not sufficient.
Fix this by:
(1) Changing rxrpc_kernel_lookup_peer() to return -ENOMEM rather than NULL
on allocation failure.
(2) Making the callers in afs use IS_ERR() and PTR_ERR() to pass on the
error code returned. |
| In the Linux kernel, the following vulnerability has been resolved:
net/mlx5e: RX, Fix XDP multi-buf frag counting for striding RQ
XDP multi-buf programs can modify the layout of the XDP buffer when the
program calls bpf_xdp_pull_data() or bpf_xdp_adjust_tail(). The
referenced commit in the fixes tag corrected the assumption in the mlx5
driver that the XDP buffer layout doesn't change during a program
execution. However, this fix introduced another issue: the dropped
fragments still need to be counted on the driver side to avoid page
fragment reference counting issues.
The issue was discovered by the drivers/net/xdp.py selftest,
more specifically the test_xdp_native_tx_mb:
- The mlx5 driver allocates a page_pool page and initializes it with
a frag counter of 64 (pp_ref_count=64) and the internal frag counter
to 0.
- The test sends one packet with no payload.
- On RX (mlx5e_skb_from_cqe_mpwrq_nonlinear()), mlx5 configures the XDP
buffer with the packet data starting in the first fragment which is the
page mentioned above.
- The XDP program runs and calls bpf_xdp_pull_data() which moves the
header into the linear part of the XDP buffer. As the packet doesn't
contain more data, the program drops the tail fragment since it no
longer contains any payload (pp_ref_count=63).
- mlx5 device skips counting this fragment. Internal frag counter
remains 0.
- mlx5 releases all 64 fragments of the page but page pp_ref_count is
63 => negative reference counting error.
Resulting splat during the test:
WARNING: CPU: 0 PID: 188225 at ./include/net/page_pool/helpers.h:297 mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core]
Modules linked in: [...]
CPU: 0 UID: 0 PID: 188225 Comm: ip Not tainted 6.18.0-rc7_for_upstream_min_debug_2025_12_08_11_44 #1 NONE
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
RIP: 0010:mlx5e_page_release_fragmented.isra.0+0xbd/0xe0 [mlx5_core]
[...]
Call Trace:
<TASK>
mlx5e_free_rx_mpwqe+0x20a/0x250 [mlx5_core]
mlx5e_dealloc_rx_mpwqe+0x37/0xb0 [mlx5_core]
mlx5e_free_rx_descs+0x11a/0x170 [mlx5_core]
mlx5e_close_rq+0x78/0xa0 [mlx5_core]
mlx5e_close_queues+0x46/0x2a0 [mlx5_core]
mlx5e_close_channel+0x24/0x90 [mlx5_core]
mlx5e_close_channels+0x5d/0xf0 [mlx5_core]
mlx5e_safe_switch_params+0x2ec/0x380 [mlx5_core]
mlx5e_change_mtu+0x11d/0x490 [mlx5_core]
mlx5e_change_nic_mtu+0x19/0x30 [mlx5_core]
netif_set_mtu_ext+0xfc/0x240
do_setlink.isra.0+0x226/0x1100
rtnl_newlink+0x7a9/0xba0
rtnetlink_rcv_msg+0x220/0x3c0
netlink_rcv_skb+0x4b/0xf0
netlink_unicast+0x255/0x380
netlink_sendmsg+0x1f3/0x420
__sock_sendmsg+0x38/0x60
____sys_sendmsg+0x1e8/0x240
___sys_sendmsg+0x7c/0xb0
[...]
__sys_sendmsg+0x5f/0xb0
do_syscall_64+0x55/0xc70
The problem applies for XDP_PASS as well which is handled in a different
code path in the driver.
This patch fixes the issue by doing page frag counting on all the
original XDP buffer fragments for all relevant XDP actions (XDP_TX ,
XDP_REDIRECT and XDP_PASS). This is basically reverting to the original
counting before the commit in the fixes tag.
As frag_page is still pointing to the original tail, the nr_frags
parameter to xdp_update_skb_frags_info() needs to be calculated
in a different way to reflect the new nr_frags. |
