| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| When a Client SSL profile is configured with Allow Dynamic Record Sizing on a UDP virtual server, undisclosed traffic can cause the Traffic Management Microkernel (TMM) to terminate.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Zulip is an open-source team collaboration tool. Prior to 12.0, With message_edit_history_visibility_policy set to "moves", /api/v1/messages/{id}/history still returns historical content values, allowing low-privilege users to recover text that was edited away from other users' messages. This vulnerability is fixed in 12.0. |
| Grav is a file-based Web platform. Prior to 2.0.0-rc.2, the Twig sandbox allow-list permits any user with the admin.pages role to call config.toArray() from within a page body, dumping the entire merged site configuration — including all plugin secrets (SMTP passwords, AWS keys, OAuth client secrets, API tokens) — into the rendered HTML. No administrator privileges are required. This vulnerability is fixed in 2.0.0-rc.2. |
| An improper restriction of excessive authentication attempts vulnerability in Fortinet FortiAnalyzer 7.6.0 through 7.6.4, FortiAnalyzer 7.4 all versions, FortiAnalyzer 7.2 all versions, FortiAnalyzer 7.0 all versions, FortiAnalyzer 6.4 all versions, FortiAnalyzer Cloud 7.6.0 through 7.6.4, FortiAnalyzer Cloud 7.4 all versions, FortiAnalyzer Cloud 7.2 all versions, FortiAnalyzer Cloud 7.0 all versions, FortiAnalyzer Cloud 6.4 all versions, FortiManager 7.6.0 through 7.6.4, FortiManager 7.4 all versions, FortiManager 7.2 all versions, FortiManager 7.0 all versions, FortiManager 6.4 all versions, FortiManager Cloud 7.6.0 through 7.6.4, FortiManager Cloud 7.4 all versions, FortiManager Cloud 7.2 all versions, FortiManager Cloud 7.0 all versions, FortiManager Cloud 6.4 all versions may allow an attacker to bypass bruteforce protections via exploitation of race conditions. The latter raises the complexity of practical exploitation. |
| An arbitrary file write vulnerability exists in Casdoor's Local File System storage provider. Due to insufficient path sanitization, an authenticated attacker with administrative privileges can perform a Path Traversal attack to create or overwrite arbitrary files anywhere on the host filesystem, bypassing the application's intended storage sandbox. |
| A heap-based buffer overflow vulnerability exists in a Network management service of AOS-8 and AOS-10 that could allow an unauthenticated remote attacker to achieve remote code execution. Successful exploitation could allow an unauthenticated attacker to execute arbitrary code as a privileged user on the underlying operating system, potentially leading to a system compromise. Exploitation may also result in a denial-of-service (DoS) condition affecting the impacted system process. |
| Command injection vulnerabilities exist in the command line interface (CLI) service accessed by the PAPI protocol of AOS-8 and AOS-10 Operating Systems. Successful exploitation of these vulnerabilities could allow an authenticated remote attacker to execute arbitrary commands on the underlying operating system. |
| urllib3 is an HTTP client library for Python. From 2.6.0 to before 2.7.0, urllib3 could decompress the whole response instead of the requested portion (1) during the second HTTPResponse.read(amt=N) call when the response was decompressed using the official Brotli library or (2) when HTTPResponse.drain_conn() was called after the response had been read and decompressed partially (compression algorithm did not matter here). These issues could cause urllib3 to fully decode a small amount of highly compressed data in a single operation. This could result in excessive resource consumption (high CPU usage and massive memory allocation for the decompressed data) on the client side. This vulnerability is fixed in 2.7.0. |
| Next.js is a React framework for building full-stack web applications. From 12.2.0 to before 15.5.16 and 16.2.5, an external client could send a x-nextjs-data header on a normal request to a path handled by middleware that returns a redirect. When that happened, the middleware/proxy could treat the request as a data request and replace the standard Location redirect header with the internal x-nextjs-redirect header. Browsers do not follow x-nextjs-redirect, so the response became an unusable redirect for normal clients. If the application was deployed behind a CDN or reverse proxy that caches 3xx responses without varying on this header, a single attacker request could poison the cached redirect response for the affected path. Subsequent visitors could then receive a cached redirect response without a Location header, causing a denial of service for that redirect path until the cache entry expired or was purged. This vulnerability is fixed in 15.5.16 and 16.2.5. |
| Improper Handling of Highly Compressed Data (Data Amplification) vulnerability in ninenines cowlib allows unauthenticated remote denial of service via memory exhaustion.
cow_spdy:inflate/2 in cowlib passes peer-supplied compressed bytes directly to zlib:inflate/2 with no output size bound. The SPDY header compression dictionary (?ZDICT) is public, and zlib compresses long runs of repeated bytes at roughly 1024:1, so a few kilobytes of SPDY frame payload can decompress to gigabytes on the BEAM heap, OOM-killing the node. A single unauthenticated SPDY frame is sufficient to trigger the condition. The parsers for syn_stream, syn_reply, and headers frame types are all affected via cow_spdy:parse_headers/2.
This issue affects cowlib from 0.1.0 before 2.16.1. |
| In the Linux kernel, the following vulnerability has been resolved:
memory: mtk-smi: fix device leak on larb probe
Make sure to drop the reference taken when looking up the SMI device
during larb probe on late probe failure (e.g. probe deferral) and on
driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
memory: mtk-smi: fix device leaks on common probe
Make sure to drop the reference taken when looking up the SMI device
during common probe on late probe failure (e.g. probe deferral) and on
driver unbind. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm6: fix uninitialized saddr in xfrm6_get_saddr()
xfrm6_get_saddr() does not check the return value of
ipv6_dev_get_saddr(). When ipv6_dev_get_saddr() fails to find a suitable
source address (returns -EADDRNOTAVAIL), saddr->in6 is left
uninitialized, but xfrm6_get_saddr() still returns 0 (success).
This causes the caller xfrm_tmpl_resolve_one() to use the uninitialized
address in xfrm_state_find(), triggering KMSAN warning:
=====================================================
BUG: KMSAN: uninit-value in xfrm_state_find+0x2424/0xa940
xfrm_state_find+0x2424/0xa940
xfrm_resolve_and_create_bundle+0x906/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
xfrm_lookup_route+0x63/0x2b0
ip_route_output_flow+0x1ce/0x270
udp_sendmsg+0x2ce1/0x3400
inet_sendmsg+0x1ef/0x2a0
__sock_sendmsg+0x278/0x3d0
__sys_sendto+0x593/0x720
__x64_sys_sendto+0x130/0x200
x64_sys_call+0x332b/0x3e70
do_syscall_64+0xd3/0xf80
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Local variable tmp.i.i created at:
xfrm_resolve_and_create_bundle+0x3e3/0x5a20
xfrm_lookup_with_ifid+0xcc0/0x3770
=====================================================
Fix by checking the return value of ipv6_dev_get_saddr() and propagating
the error. |
| In the Linux kernel, the following vulnerability has been resolved:
media: iris: gen1: Destroy internal buffers after FW releases
After the firmware releases internal buffers, the driver was not
destroying them. This left stale allocations that were no longer used,
especially across resolution changes where new buffers are allocated per
the updated requirements. As a result, memory was wasted until session
close.
Destroy internal buffers once the release response is received from the
firmware. |
| In the Linux kernel, the following vulnerability has been resolved:
mfd: core: Add locking around 'mfd_of_node_list'
Manipulating a list in the kernel isn't safe without some sort of
mutual exclusion. Add a mutex any time we access / modify
'mfd_of_node_list' to prevent possible crashes. |
| REJECT ** DO NOT USE THIS CANDIDATE NUMBER. ConsultIDs: CVE-2026-40520. Reason: This candidate is a duplicate of CVE-2026-40520. Notes: All CVE users should reference CVE-2026-40520 instead of this candidate. |
| Loop with unreachable exit condition ('infinite loop') in ASP.NET Core allows an unauthorized attacker to deny service over a network. |
| Grav is a file-based Web platform. Prior to 2.0.0-beta.2, there is a Path Traversal vulnerability within the FormFlash core component. By manipulating the session_id (passed as __form-flash-id in POST requests), an unauthenticated attacker can traverse the filesystem to create arbitrary directories and write an index.yaml file containing attacker-controlled data. This vulnerability can lead to unauthorized modification of application behavior, potential data integrity issues, and service disruption in production environments. This vulnerability is fixed in 2.0.0-beta.2. |
| Adobe Commerce versions 2.4.9-beta1, 2.4.8-p4, 2.4.7-p9, 2.4.6-p14, 2.4.5-p16, 2.4.4-p17 and earlier are affected by a stored Cross-Site Scripting (XSS) vulnerability that could be abused by a low-privileged attacker to inject malicious scripts into vulnerable form fields. Malicious JavaScript may be executed in a victim's browser when they browse to the page containing the vulnerable field, potentially gaining elevated access or control over the victim's account or session. Scope is changed. |
| Hono is a Web application framework that provides support for any JavaScript runtime. Prior to 4.12.16, Improper handling of JSX element tag names in hono/jsx allowed unvalidated tag names to be directly inserted into the generated HTML output. When untrusted input is used as a tag name via the programmatic jsx() or createElement() APIs during server-side rendering, specially crafted values may break out of the intended element context and inject unintended HTML. This vulnerability is fixed in 4.12.16. |
