| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| OpenClaw versions prior to 2026.2.22 contain an environment variable injection vulnerability in the system.run function that allows attackers to bypass command allowlist restrictions via SHELLOPTS and PS4 environment variables. An attacker who can invoke system.run with request-scoped environment variables can execute arbitrary shell commands outside the intended allowlisted command body through bash xtrace expansion. |
| In wolfSSL 5.8.4, constant-time masking logic in sp_256_get_entry_256_9 is optimized into conditional branches (bnez) by GCC when targeting RISC-V RV32I with -O3. This transformation breaks the side-channel resistance of ECC scalar multiplication, potentially allowing a local attacker to recover secret keys via timing analysis. |
| OpenClaw versions prior to 2026.2.25 contain a time-of-check-time-of-use vulnerability in approval-bound system.run execution where the cwd parameter is validated at approval time but resolved at execution time. Attackers can retarget a symlinked cwd between approval and execution to bypass command execution restrictions and execute arbitrary commands on node hosts. |
| Avo is a framework to create admin panels for Ruby on Rails apps. Prior to version 3.30.3, a reflected cross-site scripting (XSS) vulnerability exists in the return_to query parameter used in the avo interface. An attacker can craft a malicious URL that injects arbitrary JavaScript, which is executed when he clicks a dynamically generated navigation button. This issue has been patched in version 3.30.3. |
| OpenClaw versions prior to 2026.2.25 contain an access control vulnerability in signal reaction notification handling that allows unauthorized senders to enqueue status events before authorization checks are applied. Attackers can exploit the reaction-only event path in event-handler.ts to queue signal reaction status lines for sessions without proper DM or group access validation. |
| OpenClaw versions prior to 2026.2.23 contain a sandbox bypass vulnerability in the sandboxed image tool that fails to enforce tools.fs.workspaceOnly restrictions on mounted sandbox paths, allowing attackers to read out-of-workspace files. Attackers can load restricted mounted images and exfiltrate them through vision model provider requests to bypass sandbox confidentiality controls. |
| SiYuan is a personal knowledge management system. Prior to version 3.6.2, the `IsSensitivePath()` function in `kernel/util/path.go` uses a denylist approach that was recently expanded (GHSA-h5vh-m7fg-w5h6, commit 9914fd1) but remains incomplete. Multiple security-relevant Linux directories are not blocked, including `/opt` (application data), `/usr` (local configs/binaries), `/home` (other users), `/mnt` and `/media` (mounted volumes). The `globalCopyFiles` and `importStdMd` endpoints rely on `IsSensitivePath` as their primary defense against reading files outside the workspace. Version 3.6.2 contains an updated fix. |
| OpenClaw versions prior to 2026.2.22 contain an authentication bypass vulnerability that allows clients authenticated with a shared gateway token to connect as role=node without device identity verification. Attackers can exploit this by claiming the node role during WebSocket handshake to inject unauthorized node.event calls, triggering agent.request and voice.transcript flows without proper device pairing. |
| Paint Studio 2.17 contains a denial of service vulnerability that allows local attackers to crash the application by providing malformed input through the key entry mechanism. Attackers can create a text file with a large buffer of characters and trigger the application to read it, causing the application to crash and become unavailable. |
| SiYuan is a personal knowledge management system. Prior to version 3.6.2, the SiYuan kernel WebSocket server accepts unauthenticated connections when a specific "auth keepalive" query parameter is present. After connection, incoming messages are parsed using unchecked type assertions on attacker-controlled JSON. A remote attacker can send malformed messages that trigger a runtime panic, potentially crashing the kernel process and causing denial of service. Version 3.6.2 fixes the issue. |
| Admidio is an open-source user management solution. In versions 5.0.0 through 5.0.6, the forum module in Admidio does not verify whether the current user has permission to delete forum topics or posts. Both the topic_delete and post_delete actions in forum.php only validate the CSRF token but perform no authorization check before calling delete(). Any authenticated user with forum access can delete any topic (with all its posts) or any individual post by providing its UUID. This is inconsistent with the save/edit operations, which properly check isAdministratorForum() and ownership before allowing modifications. Any logged-in user can permanently and irreversibly delete any forum topic (including all its posts) or any individual post by simply knowing its UUID (which is publicly visible in URLs), completely bypassing authorization checks. This issue has been fixed in version 5.0.7. |
| Statamic is a Laravel and Git powered content management system (CMS). Prior to versions 5.73.14 and 6.7.0, a stored XSS vulnerability in SVG asset reuploads allows authenticated users with asset upload permissions to bypass SVG sanitization and inject malicious JavaScript that executes when the asset is viewed. This has been fixed in 5.73.14 and 6.7.0. |
| Statamic is a Laravel and Git powered content management system (CMS). Prior to versions 5.73.14 and 6.7.0, low-privileged Control Panel users could create taxonomy terms by submitting requests to the field action processing endpoint with attacker-controlled field definitions. This bypasses the authorization checks enforced on the standard taxonomy term creation endpoint. This has been fixed in 5.73.14 and 6.7.0. |
| WWBN AVideo is an open source video platform. Prior to version 26.0, a Server-Side Request Forgery (SSRF) vulnerability exists in `plugin/Live/standAloneFiles/saveDVR.json.php`. When the AVideo Live plugin is deployed in standalone mode (the intended configuration for this file), the `$_REQUEST['webSiteRootURL']` parameter is used directly to construct a URL that is fetched server-side via `file_get_contents()`. No authentication, origin validation, or URL allowlisting is performed. Version 26.0 contains a patch for the issue. |
| Free5GC is an open-source Linux Foundation project for 5th generation (5G) mobile core networks. Versions prior to 1.4.2 are vulnerable to procedure panic caused by Nil Pointer Dereference in the /sdm-subscriptions endpoint. A remote attacker can cause the UDM service to panic and crash by sending a crafted POST request to the /sdm-subscriptions endpoint with a malformed URL path containing path traversal sequences (../) and a large JSON payload. The DataChangeNotificationProcedure function in notifier.go attempts to access a nil pointer without proper validation, causing a complete service crash with "runtime error: invalid memory address or nil pointer dereference". Exploitation would result in UDM functionality disruption until recovery by restart. This issue has been fixed in version 1.4.2. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: mark requests for GuC virtual engines to avoid use-after-free
References to i915_requests may be trapped by userspace inside a
sync_file or dmabuf (dma-resv) and held indefinitely across different
proceses. To counter-act the memory leaks, we try to not to keep
references from the request past their completion.
On the other side on fence release we need to know if rq->engine
is valid and points to hw engine (true for non-virtual requests).
To make it possible extra bit has been added to rq->execution_mask,
for marking virtual engines.
(cherry picked from commit 280410677af763f3871b93e794a199cfcf6fb580) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ipset: Rework long task execution when adding/deleting entries
When adding/deleting large number of elements in one step in ipset, it can
take a reasonable amount of time and can result in soft lockup errors. The
patch 5f7b51bf09ba ("netfilter: ipset: Limit the maximal range of
consecutive elements to add/delete") tried to fix it by limiting the max
elements to process at all. However it was not enough, it is still possible
that we get hung tasks. Lowering the limit is not reasonable, so the
approach in this patch is as follows: rely on the method used at resizing
sets and save the state when we reach a smaller internal batch limit,
unlock/lock and proceed from the saved state. Thus we can avoid long
continuous tasks and at the same time removed the limit to add/delete large
number of elements in one step.
The nfnl mutex is held during the whole operation which prevents one to
issue other ipset commands in parallel. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: mvebu: fix irq domain leak
Uwe Kleine-König pointed out we still have one resource leak in the mvebu
driver triggered on driver detach. Let's address it with a custom devm
action. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, cpumap: Make sure kthread is running before map update returns
The following warning was reported when running stress-mode enabled
xdp_redirect_cpu with some RT threads:
------------[ cut here ]------------
WARNING: CPU: 4 PID: 65 at kernel/bpf/cpumap.c:135
CPU: 4 PID: 65 Comm: kworker/4:1 Not tainted 6.5.0-rc2+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Workqueue: events cpu_map_kthread_stop
RIP: 0010:put_cpu_map_entry+0xda/0x220
......
Call Trace:
<TASK>
? show_regs+0x65/0x70
? __warn+0xa5/0x240
......
? put_cpu_map_entry+0xda/0x220
cpu_map_kthread_stop+0x41/0x60
process_one_work+0x6b0/0xb80
worker_thread+0x96/0x720
kthread+0x1a5/0x1f0
ret_from_fork+0x3a/0x70
ret_from_fork_asm+0x1b/0x30
</TASK>
The root cause is the same as commit 436901649731 ("bpf: cpumap: Fix memory
leak in cpu_map_update_elem"). The kthread is stopped prematurely by
kthread_stop() in cpu_map_kthread_stop(), and kthread() doesn't call
cpu_map_kthread_run() at all but XDP program has already queued some
frames or skbs into ptr_ring. So when __cpu_map_ring_cleanup() checks
the ptr_ring, it will find it was not emptied and report a warning.
An alternative fix is to use __cpu_map_ring_cleanup() to drop these
pending frames or skbs when kthread_stop() returns -EINTR, but it may
confuse the user, because these frames or skbs have been handled
correctly by XDP program. So instead of dropping these frames or skbs,
just make sure the per-cpu kthread is running before
__cpu_map_entry_alloc() returns.
After apply the fix, the error handle for kthread_stop() will be
unnecessary because it will always return 0, so just remove it. |
| In the Linux kernel, the following vulnerability has been resolved:
null_blk: Always check queue mode setting from configfs
Make sure to check device queue mode in the null_validate_conf() and
return error for NULL_Q_RQ as we don't allow legacy I/O path, without
this patch we get OOPs when queue mode is set to 1 from configfs,
following are repro steps :-
modprobe null_blk nr_devices=0
mkdir config/nullb/nullb0
echo 1 > config/nullb/nullb0/memory_backed
echo 4096 > config/nullb/nullb0/blocksize
echo 20480 > config/nullb/nullb0/size
echo 1 > config/nullb/nullb0/queue_mode
echo 1 > config/nullb/nullb0/power
Entering kdb (current=0xffff88810acdd080, pid 2372) on processor 42 Oops: (null)
due to oops @ 0xffffffffc041c329
CPU: 42 PID: 2372 Comm: sh Tainted: G O N 6.3.0-rc5lblk+ #5
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
RIP: 0010:null_add_dev.part.0+0xd9/0x720 [null_blk]
Code: 01 00 00 85 d2 0f 85 a1 03 00 00 48 83 bb 08 01 00 00 00 0f 85 f7 03 00 00 80 bb 62 01 00 00 00 48 8b 75 20 0f 85 6d 02 00 00 <48> 89 6e 60 48 8b 75 20 bf 06 00 00 00 e8 f5 37 2c c1 48 8b 75 20
RSP: 0018:ffffc900052cbde0 EFLAGS: 00010246
RAX: 0000000000000001 RBX: ffff88811084d800 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff888100042e00
RBP: ffff8881053d8200 R08: ffffc900052cbd68 R09: ffff888105db2000
R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000002
R13: ffff888104765200 R14: ffff88810eec1748 R15: ffff88810eec1740
FS: 00007fd445fd1740(0000) GS:ffff8897dfc80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000060 CR3: 0000000166a00000 CR4: 0000000000350ee0
DR0: ffffffff8437a488 DR1: ffffffff8437a489 DR2: ffffffff8437a48a
DR3: ffffffff8437a48b DR6: 00000000ffff0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
nullb_device_power_store+0xd1/0x120 [null_blk]
configfs_write_iter+0xb4/0x120
vfs_write+0x2ba/0x3c0
ksys_write+0x5f/0xe0
do_syscall_64+0x3b/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fd4460c57a7
Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007ffd3792a4a8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000002 RCX: 00007fd4460c57a7
RDX: 0000000000000002 RSI: 000055b43c02e4c0 RDI: 0000000000000001
RBP: 000055b43c02e4c0 R08: 000000000000000a R09: 00007fd44615b4e0
R10: 00007fd44615b3e0 R11: 0000000000000246 R12: 0000000000000002
R13: 00007fd446198520 R14: 0000000000000002 R15: 00007fd446198700
</TASK> |
