| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Velocidex WinPmem versions below 4.1 suffer from an Out of Bounds Write vulnerability. By using an IO Control, a user space program can trick the driver into writing a 0 into any chosen memory location. In conjunction with information leakage from the WinPmem driver, attackers can discover the location in memory for the g_CiOptions global symbol. This can be leveraged to disable signed driver enforcement on the target system - allowing attackers to load unsigned drivers. |
| Out-of-bounds write in the firmware for the Intel(R) AMT and Intel(R) Standard Manageability within Ring 3: User Applications may allow a denial of service. Network adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via network access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (low) impacts. |
| A vulnerability, which was classified as critical, has been found in Wifi-soft UniBox Controller up to 20250506. Affected by this issue is some unknown functionality of the file /billing/test_accesscodelogin.php. The manipulation of the argument Password leads to os command injection. The attack may be launched remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| The end-of-life Netgear FVS336Gv2 and FVS336Gv3 are affected by a command injection vulnerability in the Telnet interface. An authenticated and remote attacker can execute arbitrary OS commands as root over Telnet by sending crafted "util backup_configuration" commands. |
| An issue was discovered on KuWFi GC111 devices (Hardware Version: CPE-LM321_V3.2, Software Version: GC111-GL-LM321_V3.0_20191211). They are vulnerable to unauthenticated /goform/goform_set_cmd_process requests. A crafted POST request, using the SSID parameter, allows remote attackers to execute arbitrary OS commands with root privileges. |
| A command injection vulnerability exists in LILIN Digital Video Recorder (DVR) devices prior to firmware version 2.0b60_20200207 due to insufficient sanitization of the FTP and NTP Server fields in the service configuration. An attacker with access to the configuration interface can upload a malicious XML file with injected shell commands in these fields. Upon subsequent configuration syncs, these commands are executed with elevated privileges. This vulnerability was exploited in the wild by the Moobot botnets. |
| The following APIs for the Silcon Labs SiWx91x prior to vesion 3.4.0 failed to check the size of the output buffer of the caller which could lead to data corruption on the host (Cortex-M4) application.
sl_si91x_aes
sl_si91x_gcm
sl_si91x_ccm
sl_si91x_sha |
| When decoding an OpenEXR file that uses DWAA or DWAB compression, the specified raw length of run-length-encoded data is not checked when using it to calculate the output data.
We read rle_raw_size from the input file at [0], we decompress and decode into the buffer td->rle_raw_data of size rle_raw_size at [1], and then at [2] we will access entries in this buffer up to (td->xsize - 1) * (td->ysize - 1) + rle_raw_size / 2, which may exceed rle_raw_size.
We recommend upgrading to version 8.0 or beyond. |
| A vulnerability in the software upgrade process of Cisco Nexus 3000 Series Switches and Cisco Nexus 9000 Series Switches in standalone NX-OS mode could allow an authenticated, local attacker with valid Administrator credentials to execute a command injection attack on the underlying operating system of an affected device.
This vulnerability is due to insufficient validation of specific elements within a software image. An attacker could exploit this vulnerability by installing a crafted image. A successful exploit could allow the attacker to execute arbitrary commands on the underlying operating system with root privileges.
Note: Administrators should validate the hash of any software image before installation. |
| The device has two web servers that expose unauthenticated REST APIs on the management network (TCP
ports 8084 and 8086). Exploiting OS command injection through these APIs, an attacker can send arbitrary
commands that are executed with administrative permissions by the underlying operating system. |
| Improper neutralization of special elements used in an OS command ('OS Command Injection') issue exists in acmailer CGI ver.4.0.3 and earlier and acmailer DB ver.1.1.5 and earlier. If this vulnerability is exploited, an arbitrary OS command may be executed by an attacker. |
| A Looker user with a Developer role could cause Looker to execute a malicious command, due to insecure processing of Teradata driver parameters.
Looker-hosted and Self-hosted were found to be vulnerable.
This issue has already been mitigated for Looker-hosted instances. No user action is required for these.
Self-hosted instances must be upgraded as soon as possible. This vulnerability has been patched in all supported versions of Self-hosted.
The versions below have all been updated to protect from this vulnerability. You can download these versions at the Looker download page https://download.looker.com/ :
* 24.12.108+
* 24.18.200+
* 25.0.78+
* 25.6.65+
* 25.8.47+
* 25.12.10+
* 25.14+ |
| TG8 Firewall contains a pre-authentication remote code execution vulnerability in the runphpcmd.php endpoint. The syscmd POST parameter is passed directly to a system command without validation and executed with root privileges. A remote, unauthenticated attacker can supply crafted values to execute arbitrary operating system commands as root, resulting in full device compromise. |
| A privilege escalation vulnerability was reported in Lenovo Service Bridge prior to version 5.0.2.17 that could allow operating system commands to be executed if a specially crafted link is visited. |
| An out-of-bounds write flaw was found in mpg123 when handling crafted streams. When decoding PCM, the libmpg123 may write past the end of a heap-located buffer. Consequently, heap corruption may happen, and arbitrary code execution is not discarded. The complexity required to exploit this flaw is considered high as the payload must be validated by the MPEG decoder and the PCM synth before execution. Additionally, to successfully execute the attack, the user must scan through the stream, making web live stream content (such as web radios) a very unlikely attack vector. |
| An authenticated command injection vulnerability exists in the Polycom HDX Series command shell interface accessible over Telnet. The lan traceroute command in the devcmds console accepts unsanitized input, allowing attackers to execute arbitrary system commands. By injecting shell metacharacters through the traceroute interface, an attacker can achieve remote code execution under the context of the root user. This flaw affects systems where Telnet access is enabled and either unauthenticated access is allowed or credentials are known. |
| Out-of-bounds write for some Intel(R) PROSet/Wireless WiFi Software for Windows before version 23.160 within Ring 2: Device Drivers may allow a denial of service. Unprivileged software adversary with an unauthenticated user combined with a low complexity attack may enable denial of service. This result may potentially occur via adjacent access when attack requirements are not present without special internal knowledge and requires no user interaction. The potential vulnerability may impact the confidentiality (none), integrity (none) and availability (high) of the vulnerable system, resulting in subsequent system confidentiality (none), integrity (none) and availability (high) impacts. |
| A vulnerability in the CLI of Cisco Secure Firewall Management Center (FMC) Software and Cisco Secure Firewall Threat Defense (FTD) Software could allow an authenticated, local attacker to execute arbitrary commands on the underlying operating system as root.
This vulnerability is due to improper input validation for specific CLI commands. An attacker could exploit this vulnerability by injecting operating system commands into a legitimate command. A successful exploit could allow the attacker to escape the restricted command prompt and execute arbitrary commands on the underlying operating system. To successfully exploit this vulnerability, an attacker would need valid Administrator credentials.
For more information about vulnerable scenarios, see the Details ["#details"] section of this advisory. |
| ejson2env allows users to decrypt EJSON secrets and export them as environment variables. Prior to version 2.0.8, the `ejson2env` tool has a vulnerability related to how it writes to `stdout`. Specifically, the tool is intended to write an export statement for environment variables and their values. However, due to inadequate output sanitization, there is a potential risk where variable names or values may include malicious content, resulting in additional unintended commands being output to `stdout`. If this output is improperly utilized in further command execution, it could lead to command injection, allowing an attacker to execute arbitrary commands on the host system. Version 2.0.8 sanitizes output during decryption. Other mitigations involve avoiding use of `ejson2env` to decrypt untrusted user secrets and/or avoiding evaluating or executing the direct output from `ejson2env` without removing nonprintable characters. |
| Dotmesh is a git-like command-line interface for capturing, organizing and sharing application states. In versions 0.8.1 and prior, the unsafe handling of symbolic links in an unpacking routine may
enable attackers to read and/or write to arbitrary locations outside the
designated target folder. The routine `untarFile` attempts to guard against creating symbolic links that point outside the directory a tar archive is extracted to. However, a malicious tarball first linking `subdir/parent` to `..` (allowed, because `subdir/..` falls within the archive root) and then linking `subdir/parent/escapes` to `..` results in a symbolic link pointing to the tarball’s parent directory, contrary to the routine’s goals. This issue may lead to arbitrary file write (with same permissions as the program running the unpack operation) if the attacker can control the archive file. Additionally, if the attacker has read access to the unpacked files, they may be able to read arbitrary system files the parent process has permissions to read. As of time of publication, no patch for this issue is available.
|
