| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Initialize free_qp completion before using it
In irdma_create_qp, if ib_copy_to_udata fails, it will call
irdma_destroy_qp to clean up which will attempt to wait on
the free_qp completion, which is not initialized yet. Fix this
by initializing the completion before the ib_copy_to_udata call. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix potential deadlock in cpu hotplug with osnoise
The following sequence may leads deadlock in cpu hotplug:
task1 task2 task3
----- ----- -----
mutex_lock(&interface_lock)
[CPU GOING OFFLINE]
cpus_write_lock();
osnoise_cpu_die();
kthread_stop(task3);
wait_for_completion();
osnoise_sleep();
mutex_lock(&interface_lock);
cpus_read_lock();
[DEAD LOCK]
Fix by swap the order of cpus_read_lock() and mutex_lock(&interface_lock). |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix exception exit lock checking for subprogs
process_bpf_exit_full() passes check_lock = !curframe to
check_resource_leak(), which is false in cases when bpf_throw() is
called from a static subprog. This makes check_resource_leak() to skip
validation of active_rcu_locks, active_preempt_locks, and
active_irq_id on exception exits from subprogs.
At runtime bpf_throw() unwinds the stack via ORC without releasing any
user-acquired locks, which may cause various issues as the result.
Fix by setting check_lock = true for exception exits regardless of
curframe, since exceptions bypass all intermediate frame
cleanup. Update the error message prefix to "bpf_throw" for exception
exits to distinguish them from normal BPF_EXIT.
Fix reject_subprog_with_rcu_read_lock test which was previously
passing for the wrong reason. Test program returned directly from the
subprog call without closing the RCU section, so the error was
triggered by the unclosed RCU lock on normal exit, not by
bpf_throw. Update __msg annotations for affected tests to match the
new "bpf_throw" error prefix.
The spin_lock case is not affected because they are already checked [1]
at the call site in do_check_insn() before bpf_throw can run.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/kernel/bpf/verifier.c?h=v7.0-rc4#n21098 |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/irdma: Harden depth calculation functions
An issue was exposed where OS can pass in U32_MAX for SQ/RQ/SRQ size.
This can cause integer overflow and truncation of SQ/RQ/SRQ depth
returning a success when it should have failed.
Harden the functions to do all depth calculations and boundary
checking in u64 sizes. |
| In the Linux kernel, the following vulnerability has been resolved:
esp: fix skb leak with espintcp and async crypto
When the TX queue for espintcp is full, esp_output_tail_tcp will
return an error and not free the skb, because with synchronous crypto,
the common xfrm output code will drop the packet for us.
With async crypto (esp_output_done), we need to drop the skb when
esp_output_tail_tcp returns an error. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/pagewalk: fix race between concurrent split and refault
The splitting of a PUD entry in walk_pud_range() can race with a
concurrent thread refaulting the PUD leaf entry causing it to try walking
a PMD range that has disappeared.
An example and reproduction of this is to try reading numa_maps of a
process while VFIO-PCI is setting up DMA (specifically the
vfio_pin_pages_remote call) on a large BAR for that process.
This will trigger a kernel BUG:
vfio-pci 0000:03:00.0: enabling device (0000 -> 0002)
BUG: unable to handle page fault for address: ffffa23980000000
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
...
RIP: 0010:walk_pgd_range+0x3b5/0x7a0
Code: 8d 43 ff 48 89 44 24 28 4d 89 ce 4d 8d a7 00 00 20 00 48 8b 4c 24
28 49 81 e4 00 00 e0 ff 49 8d 44 24 ff 48 39 c8 4c 0f 43 e3 <49> f7 06
9f ff ff ff 75 3b 48 8b 44 24 20 48 8b 40 28 48 85 c0 74
RSP: 0018:ffffac23e1ecf808 EFLAGS: 00010287
RAX: 00007f44c01fffff RBX: 00007f4500000000 RCX: 00007f44ffffffff
RDX: 0000000000000000 RSI: 000ffffffffff000 RDI: ffffffff93378fe0
RBP: ffffac23e1ecf918 R08: 0000000000000004 R09: ffffa23980000000
R10: 0000000000000020 R11: 0000000000000004 R12: 00007f44c0200000
R13: 00007f44c0000000 R14: ffffa23980000000 R15: 00007f44c0000000
FS: 00007fe884739580(0000) GS:ffff9b7d7a9c0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffffa23980000000 CR3: 000000c0650e2005 CR4: 0000000000770ef0
PKRU: 55555554
Call Trace:
<TASK>
__walk_page_range+0x195/0x1b0
walk_page_vma+0x62/0xc0
show_numa_map+0x12b/0x3b0
seq_read_iter+0x297/0x440
seq_read+0x11d/0x140
vfs_read+0xc2/0x340
ksys_read+0x5f/0xe0
do_syscall_64+0x68/0x130
? get_page_from_freelist+0x5c2/0x17e0
? mas_store_prealloc+0x17e/0x360
? vma_set_page_prot+0x4c/0xa0
? __alloc_pages_noprof+0x14e/0x2d0
? __mod_memcg_lruvec_state+0x8d/0x140
? __lruvec_stat_mod_folio+0x76/0xb0
? __folio_mod_stat+0x26/0x80
? do_anonymous_page+0x705/0x900
? __handle_mm_fault+0xa8d/0x1000
? __count_memcg_events+0x53/0xf0
? handle_mm_fault+0xa5/0x360
? do_user_addr_fault+0x342/0x640
? arch_exit_to_user_mode_prepare.constprop.0+0x16/0xa0
? irqentry_exit_to_user_mode+0x24/0x100
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fe88464f47e
Code: c0 e9 b6 fe ff ff 50 48 8d 3d be 07 0b 00 e8 69 01 02 00 66 0f 1f
84 00 00 00 00 00 64 8b 04 25 18 00 00 00 85 c0 75 14 0f 05 <48> 3d 00
f0 ff ff 77 5a c3 66 0f 1f 84 00 00 00 00 00 48 83 ec 28
RSP: 002b:00007ffe6cd9a9b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000000
RAX: ffffffffffffffda RBX: 0000000000020000 RCX: 00007fe88464f47e
RDX: 0000000000020000 RSI: 00007fe884543000 RDI: 0000000000000003
RBP: 00007fe884543000 R08: 00007fe884542010 R09: 0000000000000000
R10: fffffffffffffbc5 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000003 R14: 0000000000020000 R15: 0000000000020000
</TASK>
Fix this by validating the PUD entry in walk_pmd_range() using a stable
snapshot (pudp_get()). If the PUD is not present or is a leaf, retry the
walk via ACTION_AGAIN instead of descending further. This mirrors the
retry logic in walk_pte_range(), which lets walk_pmd_range() retry if the
PTE is not being got by pte_offset_map_lock(). |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: check contexts->nr in repeat_call_fn
damon_sysfs_repeat_call_fn() calls damon_sysfs_upd_tuned_intervals(),
damon_sysfs_upd_schemes_stats(), and
damon_sysfs_upd_schemes_effective_quotas() without checking contexts->nr.
If nr_contexts is set to 0 via sysfs while DAMON is running, these
functions dereference contexts_arr[0] and cause a NULL pointer
dereference. Add the missing check.
For example, the issue can be reproduced using DAMON sysfs interface and
DAMON user-space tool (damo) [1] like below.
$ sudo damo start --refresh_interval 1s
$ echo 0 | sudo tee \
/sys/kernel/mm/damon/admin/kdamonds/0/contexts/nr_contexts |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix NULL pointer dereference in netfs_unbuffered_write() on retry
When a write subrequest is marked NETFS_SREQ_NEED_RETRY, the retry path
in netfs_unbuffered_write() unconditionally calls stream->prepare_write()
without checking if it is NULL.
Filesystems such as 9P do not set the prepare_write operation, so
stream->prepare_write remains NULL. When get_user_pages() fails with
-EFAULT and the subrequest is flagged for retry, this results in a NULL
pointer dereference at fs/netfs/direct_write.c:189.
Fix this by mirroring the pattern already used in write_retry.c: if
stream->prepare_write is NULL, skip renegotiation and directly reissue
the subrequest via netfs_reissue_write(), which handles iterator reset,
IN_PROGRESS flag, stats update and reissue internally. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: xilinx: xdma: Fix regmap init error handling
devm_regmap_init_mmio returns an ERR_PTR() upon error, not NULL.
Fix the error check and also fix the error message. Use the error code
from ERR_PTR() instead of the wrong value in ret. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: idxd: Fix leaking event log memory
During the device remove process, the device is reset, causing the
configuration registers to go back to their default state, which is
zero. As the driver is checking if the event log support was enabled
before deallocating, it will fail if a reset happened before.
Do not check if the support was enabled, the check for 'idxd->evl'
being valid (only allocated if the HW capability is available) is
enough. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: stop reclaim before pushing AIL during unmount
The unmount sequence in xfs_unmount_flush_inodes() pushed the AIL while
background reclaim and inodegc are still running. This is broken
independently of any use-after-free issues - background reclaim and
inodegc should not be running while the AIL is being pushed during
unmount, as inodegc can dirty and insert inodes into the AIL during the
flush, and background reclaim can race to abort and free dirty inodes.
Reorder xfs_unmount_flush_inodes() to stop inodegc and cancel background
reclaim before pushing the AIL. Stop inodegc before cancelling
m_reclaim_work because the inodegc worker can re-queue m_reclaim_work
via xfs_inodegc_set_reclaimable. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/damon/sysfs: fix param_ctx leak on damon_sysfs_new_test_ctx() failure
Patch series "mm/damon/sysfs: fix memory leak and NULL dereference
issues", v4.
DAMON_SYSFS can leak memory under allocation failure, and do NULL pointer
dereference when a privileged user make wrong sequences of control. Fix
those.
This patch (of 3):
When damon_sysfs_new_test_ctx() fails in damon_sysfs_commit_input(),
param_ctx is leaked because the early return skips the cleanup at the out
label. Destroy param_ctx before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: check if ext_caps is valid in BL setup
LVDS connectors don't have extended backlight caps so check
if the pointer is valid before accessing it.
(cherry picked from commit 3f797396d7f4eb9bb6eded184bbc6f033628a6f6) |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: iptfs: validate inner IPv4 header length in IPTFS payload
Add validation of the inner IPv4 packet tot_len and ihl fields parsed
from decrypted IPTFS payloads in __input_process_payload(). A crafted
ESP packet containing an inner IPv4 header with tot_len=0 causes an
infinite loop: iplen=0 leads to capturelen=min(0, remaining)=0, so the
data offset never advances and the while(data < tail) loop never
terminates, spinning forever in softirq context.
Reject inner IPv4 packets where tot_len < ihl*4 or ihl*4 < sizeof(struct
iphdr), which catches both the tot_len=0 case and malformed ihl values.
The normal IP stack performs this validation in ip_rcv_core(), but IPTFS
extracts and processes inner packets before they reach that layer. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Drain deferred trigger frees if kthread creation fails
Boot-time trigger registration can fail before the trigger-data cleanup
kthread exists. Deferring those frees until late init is fine, but the
post-boot fallback must still drain the deferred list if kthread
creation never succeeds.
Otherwise, boot-deferred nodes can accumulate on
trigger_data_free_list, later frees fall back to synchronously freeing
only the current object, and the older queued entries are leaked
forever.
To trigger this, add the following to the kernel command line:
trace_event=sched_switch trace_trigger=sched_switch.traceon,sched_switch.traceon
The second traceon trigger will fail and be freed. This triggers a NULL
pointer dereference and crashes the kernel.
Keep the deferred boot-time behavior, but when kthread creation fails,
drain the whole queued list synchronously. Do the same in the late-init
drain path so queued entries are not stranded there either. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/entry: Scrub r12 register on kernel entry
Before commit f33f2d4c7c80 ("s390/bp: remove TIF_ISOLATE_BP"),
all entry handlers loaded r12 with the current task pointer
(lg %r12,__LC_CURRENT) for use by the BPENTER/BPEXIT macros. That
commit removed TIF_ISOLATE_BP, dropping both the branch prediction
macros and the r12 load, but did not add r12 to the register clearing
sequence.
Add the missing xgr %r12,%r12 to make the register scrub consistent
across all entry points. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/syscalls: Add spectre boundary for syscall dispatch table
The s390 syscall number is directly controlled by userspace, but does
not have an array_index_nospec() boundary to prevent access past the
syscall function pointer tables. |
| In the Linux kernel, the following vulnerability has been resolved:
spi: spi-fsl-lpspi: fix teardown order issue (UAF)
There is a teardown order issue in the driver. The SPI controller is
registered using devm_spi_register_controller(), which delays
unregistration of the SPI controller until after the fsl_lpspi_remove()
function returns.
As the fsl_lpspi_remove() function synchronously tears down the DMA
channels, a running SPI transfer triggers the following NULL pointer
dereference due to use after free:
| fsl_lpspi 42550000.spi: I/O Error in DMA RX
| Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
[...]
| Call trace:
| fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi]
| fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi]
| spi_transfer_one_message+0x49c/0x7c8
| __spi_pump_transfer_message+0x120/0x420
| __spi_sync+0x2c4/0x520
| spi_sync+0x34/0x60
| spidev_message+0x20c/0x378 [spidev]
| spidev_ioctl+0x398/0x750 [spidev]
[...]
Switch from devm_spi_register_controller() to spi_register_controller() in
fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in
fsl_lpspi_remove(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: clamp SCO altsetting table indices
btusb_work() maps the number of active SCO links to USB alternate
settings through a three-entry lookup table when CVSD traffic uses
transparent voice settings. The lookup currently indexes alts[] with
data->sco_num - 1 without first constraining sco_num to the number of
available table entries.
While the table only defines alternate settings for up to three SCO
links, data->sco_num comes from hci_conn_num() and is used directly.
Cap the lookup to the last table entry before indexing it so the
driver keeps selecting the highest supported alternate setting without
reading past alts[]. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: L2CAP: Fix ERTM re-init and zero pdu_len infinite loop
l2cap_config_req() processes CONFIG_REQ for channels in BT_CONNECTED
state to support L2CAP reconfiguration (e.g. MTU changes). However,
since both CONF_INPUT_DONE and CONF_OUTPUT_DONE are already set from
the initial configuration, the reconfiguration path falls through to
l2cap_ertm_init(), which re-initializes tx_q, srej_q, srej_list, and
retrans_list without freeing the previous allocations and sets
chan->sdu to NULL without freeing the existing skb. This leaks all
previously allocated ERTM resources.
Additionally, l2cap_parse_conf_req() does not validate the minimum
value of remote_mps derived from the RFC max_pdu_size option. A zero
value propagates to l2cap_segment_sdu() where pdu_len becomes zero,
causing the while loop to never terminate since len is never
decremented, exhausting all available memory.
Fix the double-init by skipping l2cap_ertm_init() and
l2cap_chan_ready() when the channel is already in BT_CONNECTED state,
while still allowing the reconfiguration parameters to be updated
through l2cap_parse_conf_req(). Also add a pdu_len zero check in
l2cap_segment_sdu() as a safeguard. |
